Heavy Duty Outboard Boat Motor Stand Carrier Cart Dolly Trolley Transport 50kg
Description
♥ Ideal for transporting outboard motors, even over longer distances, this outboard motor trolley stand will save you hassle and protect your back whether you’re transporting your motor around the workshop, from the car, around the marina or even down stairs. It is also great for storing motors in an upright position when not in use. The Outboard Motor Engine Trolley Stand conveniently folds down when not in use and fits comfortably in a car boot.
♥ This heavy duty Outboard Motor Engine Trolley Stand is suitable for long and short shaft motors and its solid design can support a huge 50kg upon the treated pine support board.
♥ This trolley stand comes flat-packed and only takes a few minutes to assemble.
Features
50kg/110lbs Weight Capacity-This heavy duty Outboard Motor Trolley Engine Stand is suitable for long and short shaft motors and its solid design can support a huge 50kg/110lbs upon the treated pine support board
Application-Ideal for transporting small outboard motors, even over longer distances, this outboard motor trolley engine stand will save you hassle and protect your back whether you’re transporting your boat motor around the workshop, from the car, around the marina or even down stairs
Storing Upright Position-It is also great for storing boat motors in an upright position when not in use. The Outboard Motor Trolley Engine Stand conveniently folds down when not in use and fits comfortably in a car boot
Comes Flat-packed-This trolley engine stand comes flat-packed with all nuts and bolts included and only takes a few minutes to assemble
Features-Solid moulded rubber wheels; Comfortable moulded rubber grips; Durable and strong 28mm black EDC treated steel frame; Rubber tube caps for tidy finish; Quickly folds when not in use
Product Size
- Hanging board thickness: 3cm
- Hanging board length: 11cm
- Pipe diameter: 2.5cm
- Wall thickness: 0.14cm
- Wheel diameter: 14.5cm
- Wheel width: 3cm
- Size: 47cm*40cm*89.5cm
- Weight: 6.5kg
Highlights
• 50kg weight capacity
• Ideal for long and short shaft
• Solid moulded rubber wheels
• Comfortable moulded rubber grips
• Durable and strong 28mm black EDC treated steel frame
• Rubber tube caps for tidy finish
• Quickly folds when not in use
• Easy to assemble
• Comes flat-packed with all nuts and bolts included
What's Included?
1x Outboard Motor Engine Trolley Stand
Are you still struggling to move a heavy outboard motor? Are you still looking for a trolley that can be used to move as well as repair and store outboard motors? Then this is the outboard motor trolley you don't want to miss. It is made of sturdy steel tubes and pine wood, which guarantees a strong load capacity and a long service life. Its larger tires will allow you to move the outboard motor easily. It will be the ideal choice for you.
Key Features
High Load-bearing Capacity: This trolley features a thickened pine hanging board with a loading capacity of up to 110lbs , which can withstand the weight of most outboard motors.
Good Stability: It has a geometric triangular structure and two widened rear wheels, making the trolley more stable and less likely to tip over, so it is easier and safer to use.
Easy to Install: The simple construction of this trolley makes it very easy to install. It comes with all the necessary accessories in the package for convenient and time-saving installation.
Space Saving: The two support frames on the sides have been carefully designed with clasps so that you can fold this trolley quickly and without taking up too much space. So all you need is a car boot or a small corner to store it.
Electroplated Steel Frame: The surface of the steel tube stand is electroplated to prevent rust and corrosion, extending its service life.
High-quality Materials: The trolley is made of sturdy steel tubes and solid wood, which are scratch and wear resistant and not easily deformed. It is also fixed with high-quality screws to ensure a good and stable structure and a high load capacity.
Versatile Use: It can be used not only for storing and transporting outboards but also provides a firm area for the maintenance and display of motors.
Easy to Move: The trolley has two large tires on the lower end, making it very easy to transport. The heavy outboard motor can be moved by just one person, which is very convenient and hassle-free.
Guaranteed Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.
Details
Handle: The handles are fitted with anti-slip rubber caps for a comfortable grip and easy steering and movement.
Rubber Wheels: The wheel is made of rubber, which is scratch and wear resistant and has a long service life. It also increases the friction with the ground, making it safer to use.
Application
It is suitable for long and short shaft motors for moving outboards with up to and including 30 hp and can also be used to repair and display outboard motors.
How to Install
1. Open the package and remove the accessories
2. Align the screw holes of the upper and lower bracket bars and screw them together. Do the same on the other side
3. Turn the flat side of the pegboard towards yourself, then align the screw holes between the two brackets, and screw in the screws.
4. Insert the wheel bar.
5. Install the tires and secure them with the pins to complete the installation.
Specification
Load capacity: Within 40kg (88.18lb)
Material: Pine Wood+Steel
Color: Black
Features: Foldable
Surface Treatment: Electroplated
Product Size: 47*40*89.5cm/18.5*15.75*35.24in
Hanging Board Thickness: 3cm/1.18in
Hanging Board Width: 11cm/4.33in
Wheel Diameter: 14.5cm/5.71in
Wheel Width: 3cm/1.18in
Steel Tube Diameter:2.5cm/0.98in
Packing Size: 96*48*4cm/37.79*18.89*1.57in
Net Weight: 6.5kg/14.33lbs
Gross Weight: 7.9kg/17.41lbs
Max. Load Capacity: 50kg/110lbs
Package Included
1* Pegboard
2* Side Support Bars
1* Bottom U-bar
1* Wheel Bar
2* Wheels
All Accessories for Installation
Notes
Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Are you still struggling to move a heavy outboard motor? Are you still looking for a trolley that can be used to move as well as repair and store outboard motors? Then this is the outboard motor trolley you don't want to miss. It is made of sturdy steel tubes and pine wood, which guarantees a strong load capacity and a long service life. Its larger tires will allow you to move the outboard motor easily. It will be the ideal choice for you.
Key Features
High Load-bearing Capacity: This trolley features a thickened pine hanging board with a loading capacity of up to 110lbs , which can withstand the weight of most outboard motors.
Good Stability: It has a geometric triangular structure and two widened rear wheels, making the trolley more stable and less likely to tip over, so it is easier and safer to use.
Easy to Install: The simple construction of this trolley makes it very easy to install. It comes with all the necessary accessories in the package for convenient and time-saving installation.
Space Saving: The two support frames on the sides have been carefully designed with clasps so that you can fold this trolley quickly and without taking up too much space. So all you need is a car boot or a small corner to store it.
Electroplated Steel Frame: The surface of the steel tube stand is electroplated to prevent rust and corrosion, extending its service life.
High-quality Materials: The trolley is made of sturdy steel tubes and solid wood, which are scratch and wear resistant and not easily deformed. It is also fixed with high-quality screws to ensure a good and stable structure and a high load capacity.
Versatile Use: It can be used not only for storing and transporting outboards but also provides a firm area for the maintenance and display of motors.
Easy to Move: The trolley has two large tires on the lower end, making it very easy to transport. The heavy outboard motor can be moved by just one person, which is very convenient and hassle-free.
Guaranteed Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.
Details
Handle: The handles are fitted with anti-slip rubber caps for a comfortable grip and easy steering and movement.
Rubber Wheels: The wheel is made of rubber, which is scratch and wear resistant and has a long service life. It also increases the friction with the ground, making it safer to use.
Application
It is suitable for long and short shaft motors for moving outboards with up to and including 30 hp and can also be used to repair and display outboard motors.
How to Install
1. Open the package and remove the accessories
2. Align the screw holes of the upper and lower bracket bars and screw them together. Do the same on the other side
3. Turn the flat side of the pegboard towards yourself, then align the screw holes between the two brackets, and screw in the screws.
4. Insert the wheel bar.
5. Install the tires and secure them with the pins to complete the installation.
Specification
Load capacity: Within 40kg (88.18lb)
Material: Pine Wood+Steel
Color: Black
Features: Foldable
Surface Treatment: Electroplated
Product Size: 47*40*89.5cm/18.5*15.75*35.24in
Hanging Board Thickness: 3cm/1.18in
Hanging Board Width: 11cm/4.33in
Wheel Diameter: 14.5cm/5.71in
Wheel Width: 3cm/1.18in
Steel Tube Diameter:2.5cm/0.98in
Packing Size: 96*48*4cm/37.79*18.89*1.57in
Net Weight: 6.5kg/14.33lbs
Gross Weight: 7.9kg/17.41lbs
Max. Load Capacity: 50kg/110lbs
Package Included
1* Pegboard
2* Side Support Bars
1* Bottom U-bar
1* Wheel Bar
2* Wheels
All Accessories for Installation
Notes
Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
