• Application:
  •  Works on most HEUI injectors, Compatible with 1994-2003 Ford 7.3L, International T444E/DT466e/1530E, Compatible with Cat 3126B top solenoid, International Perkins 4.5L, 6.0L, & 1300edi HEUI injectors. Replace to part number # DT466E, I530, 1833564C92, DP0008, DP0007, DP0010, DP0014 MY1401 DPS0014.
  •  
  • Material:
  •  O-rings are made of quality wear-resistant Teflon coated; Shim and washers are made of standard stainless steel; Special tools and other tools are manufactured to standard; Durable, not easy to break, impact resistant, anti-corrosion, rust-resistant, long service life.
  •  
  • Kits Includes:
  •  Injector Tune Up shim Kits
  • Ca-motors-shop

    Best choice of motor parts

    7.3L Powerstroke Injector Rebuild Kit Injector Tune Up Shim Kit With Vice Clamp, Special Tools, Springs & O-Ring Seal Kit For Ford 7.3L Powerstroke HEUI Injectors 1994-2003, Replace For #1833564C92

    Application:


    Works on most HEUI injectors,
    Compatible with 1994-2003 Ford 7.3L, International T444E/DT466e/1530E,
    Compatible with Cat 3126B top solenoid, International Perkins 4.5L, 6.0L, & 1300edi HEUI injectors.
    Replace to part number # DT466E, I530, 1833564C92, DP0008, DP0007, DP0010, DP0014 MY1401 DPS0014.

     

    Material:


    O-rings are made of quality wear-resistant Teflon coated;
    Shim and washers are made of standard stainless steel;
    Special tools and other tools are manufactured to standard;
    Durable, not easy to break, impact resistant, anti-corrosion, rust-resistant, long service life.

     

    Kits Includes:


    Injector Tune Up shim Kits


    12pcs .004" thick Armature Washers, stainless steel
    12pcs .002" thick Armature Washers, stainless steel
    45pcs .002" thick Solenoid Washers, stainless steel
    45pcs .003" thick Solenoid Washers, stainless steel

     

    Special Torx Tools


    1pcs Special IP15 Torx to remove Solenoid Screws
    2pcs Special reverse TORX PLUS MAXX to remove stock armature security screws
    1pcs T10 Torx to install the 10 new DPS0010 screw
    1pcs Special tool to remove and reuse any striped-out solenoid screws
    2pcs 1/4" X 3" Magnetic bit holder to remove armature and solenoid screws in truck. Use it with 1/4" Box end wrench

     

    Special Tool Set


    1 set (2pcs) .002" feeler gauge & .004" feeler gauge to check clearances
    1pcs Wool dauber helps add oil to the brass cup before installing your injectors.
    10pcs DPS0010 hardened screws with T10 Torx heads

     

    A Complete HEUI Injector Seal Kits


    8 sets (48pcs) DPS008 wear resistant Teflon coated OEM proved quality EXTERNAL O-ring
    8 sets (24pcs) INTERNAL O-ring seal kit
    8pcs poppet springs
    8pcs nozzle springs
    20pcs check balls (2 check balls Req. for each injector)
    8pcs New Heavy Duty Spiral Solid stainless Steel Back up Rings to Replace Standard Slit Steel Back


    Item Specifics
    Brand CA-Auto
    Manufacturer Part Number CAQP1780
    Type 7.3L Powerstroke Injector Rebuild Kit
    Warranty 1 Year
    Fuel Type Diesel
    OE/OEM Part Number DT466E, I530, 1833564C92, DP0008, DP0007, DP0010, DP0014 MY1401 D
    Uses For For Ford 7.3L Powerstroke HEUI Injectors 1994-2003

    Payment

    . We accept payment via payoneer, paypal, credit card, debit card 

          and many other mothods.

    . S&H will be determined based upon the SHIP TO address.

    . Please list your special requests (color, packages, etc.) in the NOTES SECTION when you make payment.


     

    Shipping

    .Items will be shipped within 1-2 business day when we received payment.

    .We only ship to confirmed ebay addresses. Your ebay address MUST MATCH your Shipping address

    Returns

    .We accept 60 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 60 days of receipt, and we shall be happy to exchange or refund.

    .Leave a message note in returned box quoting your item(s) ID and buyer ID.

    .All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns.

    .It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.

    .Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return

    Contact Us

    .Welcome to our store! We are a professional worldwide wholesale company, with our own factory located in China.

    We will reply your message within 24 hours Mon-Sat, and 48 hours on Sunday.

    .We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us.

    .pls contact me first before you leave Neutral or Negative feedback. i will do my best to solve the problem, thanks!

    Any question,please don't hesitate to contact us by the ebay message.

    Ca-motors-shop

    Best choice of motor parts

    Excellent Delivery
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    7.3L Powerstroke Injector Rebuild Kit Injector Tune Up Shim Kit With Vice Clamp, Special Tools, Springs & O-Ring Seal Kit For Ford 7.3L Powerstroke HEUI Injectors 1994-2003, Replace For #1833564C92

    Application:


    Works on most HEUI injectors,
    Compatible with 1994-2003 Ford 7.3L, International T444E/DT466e/1530E,
    Compatible with Cat 3126B top solenoid, International Perkins 4.5L, 6.0L, & 1300edi HEUI injectors.
    Replace to part number # DT466E, I530, 1833564C92, DP0008, DP0007, DP0010, DP0014 MY1401 DPS0014.

     

    Material:


    O-rings are made of quality wear-resistant Teflon coated;
    Shim and washers are made of standard stainless steel;
    Special tools and other tools are manufactured to standard;
    Durable, not easy to break, impact resistant, anti-corrosion, rust-resistant, long service life.

     

    Kits Includes:


    Injector Tune Up shim Kits


    12pcs .004" thick Armature Washers, stainless steel
    12pcs .002" thick Armature Washers, stainless steel
    45pcs .002" thick Solenoid Washers, stainless steel
    45pcs .003" thick Solenoid Washers, stainless steel

     

    Special Torx Tools


    1pcs Special IP15 Torx to remove Solenoid Screws
    2pcs Special reverse TORX PLUS MAXX to remove stock armature security screws
    1pcs T10 Torx to install the 10 new DPS0010 screw
    1pcs Special tool to remove and reuse any striped-out solenoid screws
    2pcs 1/4" X 3" Magnetic bit holder to remove armature and solenoid screws in truck. Use it with 1/4" Box end wrench

     

    Special Tool Set


    1 set (2pcs) .002" feeler gauge & .004" feeler gauge to check clearances
    1pcs Wool dauber helps add oil to the brass cup before installing your injectors.
    10pcs DPS0010 hardened screws with T10 Torx heads

     

    A Complete HEUI Injector Seal Kits


    8 sets (48pcs) DPS008 wear resistant Teflon coated OEM proved quality EXTERNAL O-ring
    8 sets (24pcs) INTERNAL O-ring seal kit
    8pcs poppet springs
    8pcs nozzle springs
    20pcs check balls (2 check balls Req. for each injector)
    8pcs New Heavy Duty Spiral Solid stainless Steel Back up Rings to Replace Standard Slit Steel Back



    . We accept payment via payoneer, paypal, credit card, debit card 

          and many other mothods.

    . S&H will be determined based upon the SHIP TO address.

    . Please list your special requests (color, packages, etc.) in the NOTES SECTION when you make payment.


     

    .Items will be shipped within 1-2 business day when we received payment.

    .We only ship to confirmed ebay addresses. Your ebay address MUST MATCH your Shipping address

    .We accept 60 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 60 days of receipt, and we shall be happy to exchange or refund.

    .Leave a message note in returned box quoting your item(s) ID and buyer ID.

    .All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns.

    .It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.

    .Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return

    .Welcome to our store! We are a professional worldwide wholesale company, with our own factory located in China.

    We will reply your message within 24 hours Mon-Sat, and 48 hours on Sunday.

    .We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us.

    .pls contact me first before you leave Neutral or Negative feedback. i will do my best to solve the problem, thanks!

    Any question,please don't hesitate to contact us by the ebay message.


    All rights reserved.