Available capacities: 50, 100, 150, 200, 250, 300, 500, 750, 1000, 1500, 2000, 2500, 3000, 5000, 10,000, 15,000, 20,000, 40,000, 50,000, 100,000, 250,000 LBS. Most are available in NTEP legal for trade, stainless steel, and alloy steel versions. 100's of other models and types of load cells and accessories are available in my ebay store.
Equivalent
load cell models: Rice Lake RL20000 & RL20001, Revere 363,
Sensortronics 60001, Tadea-Huntleigh 616 & 620, CAS SB, CAS SBA,
Celton STC, KELI Electric DEFY, Anyload 101-NH, Optima OP-312.
Features:- NOT calibrated. Comes with a calibration instruction manual.
- Compression readings will show with a minus/negative symbol (-)
- You will calibrate the system yourself. 10% of capacity in a known weight is required. I recommend calibrating in tension, easier to hang some weight than balance it on a 3 inch load cell.
- Can be used in tension or compression.
- Pre-Calibrated, custom, & multiple load cell systems are available. Click above link for my contact info.
- NOTE: Photos may be representative, you will receive a system exactly as stated in the description.
- 1 year manufacturers warranty.
- Indicator features:
- 1 inch LCD digits.
- Splash proof keypad & display.
- LB/KG switchable.
- Peak hold, counting, auto hold, net, gross, tare, zero, accumulation, check weighing functions.
- Auto power, overload/error warning, upper/lower limit alarm, date/time updates.
- RS232 port for computers, PLCs, printers (no tech support, see note below).
- 110 volt AC plug & rechargeable battery are both included.
- Mounting bracket with hardware included.
- Indicator will drive up to 6 350 Ohm load cells.
- 50,000 graduations.
- 100% manual zero range.
- Available options: wireless, printers, remote, scoreboard, large digit displays, stands, etc. Contact me for details.
- Load cell features:
- 2 eyebolts included with each load cell.Nickel plated alloy steel and weld/hermetically sealed.
- Load cell cable has a pin/screw on connector. No soldering or wiring.
- Dimensions: 2.5 inches high, 2 inches wide, 1/2 inch thick.
- Thread size: 3/8 inch, 24 UNF.
- Moisture resistant (IP 68).
- 20 foot, 6 meter long cable, 5mm diameter.
- Wiring colors: Red=Positive Ex, Black=Negative Ex, Green=Positive Sig, White=Negative Sig, Yellow=Ground/Shield.
- NOTE ON TECH SUPPORT: I can advise on basic set up but I cannot help you interface with a computer, PLC, or printer.
- More technical features are available on PDF spec sheets, please contact me and I will email them to you.
Specifications:
Cable color code: +Exc-Red, -Exc-Black, +Sig-Green, -Sig-White, Shield/Ground-Yellow
Sensitivity = 3.0 +/- 0.003m V/V
Total error = +/- 0.03%FS
Creep (30 min.) = +/- 0.03%FS
Zero Balance = +/- 1% FS
TCO = +/- 0.03%FS/10 degrees C
TC Span = +/-0.03%FS/10 degrees C
Input Impedance = 400+/-20ohms
Output Impedance = 352+/-3ohms
Insulation Impedance = >/-5000Mohms
Temp Range, operating = minus 30 to +70 degrees C
Max safe overload = 120%FS
Ultimate overload = 150%FS
Excitation recommended = 10-12V DC
Excitation maximum = 15V DC
Protection Class = IP68