❤ Dear Welcome to mall2more~❤
Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
Precautions for the use of two-stroke outboards
1. The two-stroke outboard must use a mixture of No. 92 gasoline and two-stroke engine oil;
2. The volume ratio of gasoline and oil during the running-in period of the new machine is 25:1;
3. After the running-in period, the volume ratio of gasoline and oil is 50:1;
4. Special attention: gasoline and engine oil must be pre-mixed and stirred evenly, and then poured into the fuel tank;
5. The outboard motor must be started in water, do not start the engine on shore;
6. Loosen the vent screw on the fuel tank cover counterclockwise when starting;
7. When the outboard motor is started, the emergency flameout rope should be inserted, and the other end should be placed on the wrist or belt;
8. The running-in period is about 10 hours or a month, and during the running-in period, do not drive with high accelerator;
9. Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about six months;
Don't do the following will avoid cylinder Scoring:
1，start the motor in the water
2, use the motor when it stop cyling water
Even if you want test the motor, it should be done in the river!
When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
Several issues with this motor first the linkage that goes from the gear selector to the starting rope to block the rope to be pull when the motor is in gear was unattached , and still after fixing it every time you go into any gear it gets unattached second, the starting rope doesn't retract all the way when you attend to start the engine
Brand: HANGKAI
Displacement: 169CC
Gear ratio: 2.08(27:13)
Cylinder: 2
Max.Output(kw): 8.8
Max.speed(r/min): 4500-5500
Gear Positions: F-N-R
Packing size: 120x70.5x37.5cm
Ignition System: CDI
Cooling System: Water-cooling
Control System: Tiller control
Starting System: Manual start
Control System: #93 gasoline
N.W./G.W.(kgs): 27/31
Bore x Stroke(mm): 50x43
Recommended Propeller range: 3 -9"1/4''x8"
Recommended Lubricant: 2 Stroke Lubricating oil
Mixing ratio: Fuel:oil=50:1
Trim and tilt system: Manual Tilt
Overall LxWxH(cm): 78.3x33.2x104
Standard fuel tank capacity:24L external oil tank
Precautions for the use of two-stroke outboards
1. The two-stroke outboard must use a mixture of No. 92 gasoline and two-stroke engine oil;
2. The volume ratio of gasoline and oil during the running-in period of the new machine is 25:1;
3. After the running-in period, the volume ratio of gasoline and oil is 50:1;
4. Special attention: gasoline and engine oil must be pre-mixed and stirred evenly, and then poured into the fuel tank;
5. The outboard motor must be started in water, do not start the engine on shore;
6. Loosen the vent screw on the fuel tank cover counterclockwise when starting;
7. When the outboard motor is started, the emergency flameout rope should be inserted, and the other end should be placed on the wrist or belt;
8. The running-in period is about 10 hours or a month, and during the running-in period, do not drive with high accelerator;
9. Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about six months;
Don't do the following will avoid cylinder Scoring:
1，start the motor in the water
2, use the motor when it stop cyling water
Even if you want test the motor, it should be done in the river!
When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
Several issues with this motor first the linkage that goes from the gear selector to the starting rope to block the rope to be pull when the motor is in gear was unattached , and still after fixing it every time you go into any gear it gets unattached second, the starting rope doesn't retract all the way when you attend to start the engine
Brand: HANGKAI
Displacement: 169CC
Gear ratio: 2.08(27:13)
Cylinder: 2
Max.Output(kw): 8.8
Max.speed(r/min): 4500-5500
Gear Positions: F-N-R
Packing size: 120x70.5x37.5cm
Ignition System: CDI
Cooling System: Water-cooling
Control System: Tiller control
Starting System: Manual start
Control System: #93 gasoline
N.W./G.W.(kgs): 27/31
Bore x Stroke(mm): 50x43
Recommended Propeller range: 3 -9"1/4''x8"
Recommended Lubricant: 2 Stroke Lubricating oil
Mixing ratio: Fuel:oil=50:1
Trim and tilt system: Manual Tilt
Overall LxWxH(cm): 78.3x33.2x104
Standard fuel tank capacity:24L external oil tank
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
2-9 working days to: USA
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
