Specifications

Applicable Models: For 2003-2009 Toyota Prado 120 Series 1GR-FE 4.0Litre-V6

Condition: New

Material: PE          

Color: Black

Type: Diving Equipment

Process: Rotational Molding

Placement on Vehicle: Right

Way of Use: Direct Replacement

Package Size: 120*38*17cm/ 47.24*14.96*6.69in

Gross Weight: 5.17kg/11.4 lbs

Net Weight: 4.30kg/9.48 lbs

Key Features

Build to Last: This product is made of PE with a rotational molding process, which is strong and reliable, heat-resistant, impact-resistant, good toughness, and prolongs the service life of the product.

Good Compatibility: This product is a customized product, specially customized for the 2003-2009 Toyota Prado 120 series, so it can be compatible with the adapted models.

Powerful Function: It effectively increases wading height and air intake probability, prevents water and sand from entering the engine during operation, and reduces fuel consumption as well as boosts the power of the car. It can ensure your car safely pass through deep water, thus protecting the engine more effectively.

Highlights

Brand New, With High Quality

Strong Hardness

Long Service Life

Fine Workmanship

Fashionable and Cool  

Smooth Surface

Easy to Clean

Improving Vehicle Safety

Enhance Your Travelling Life

How to Install

1. It is recommended to first compare the supervisor with the vehicle body to confirm whether the angle matches when installing the wading hose (especially for non-specialized vehicles).

2. Please be sure to proofread the accuracy of the hole positions on the cardboard. If the cardboard is printed in large quantities, errors will inevitably occur. The proofreading method is to stick the cardboard tightly to the inner side of the wading throat and check whether the interface and screw hole positions are consistent with the card positions shown on the cardboard. If they are not consistent, redraw the correct hole positions.

3. By comparing the installation angle and position in the first step, confirm the punching position by pressing the cardboard tightly against the vehicle body.

4. Make sure to punch the hole after confirming the specific position of the hole.

5. The main pipe is screwed and set directly onto the punched holes, and fixed with bolts from the inside of the vehicle body.

6. The A-pillar is fixed with rivets and the equipped fixing iron parts, and all accessories are complete.

7. Simply cover the elbow or sand collecting cup directly and lock it with a clamp, which is convenient for installation and replacement.

8. The above process can be followed regardless of the vehicle model or the left and right sides, and the rest is to link the air intake.

Notes

• Non-specialized vehicles to install wading hose inside the hose a lot can not be used, you need to configure their own according to the different models of different sizes and lengths of the hose.

• Please note that a small amount of drilling/cutting is required during installation. We strongly recommend professional installation.
• Please allow the slight color difference caused by the shooting light and make sure you do not mind before you place the order. If you have any questions, please contact us, and we will reply and solve your problem as soon as possible.

Fits (As a Reference)

For 2003-2009 Toyota Prado 120 series 1GR-FE 4.0Litre-V6

Package Included

1* Snorkel Kit

Other Accessories for Assembly