WILWOOD

Guaranteed 100% DIRECT FIT BOLT ON

SET OF TWO ROTORS

Fits

1965-1982

C5 & C6 Corvette REAR

All of our Wilwood Disc Brake rotors

are now shipped with

a BLACK ELECTRO-PLATING finish ( Rotors look Black )

( Refer to PHOTOS in this ad )

As soon as you install and apply brakes Rotor Finish now

have that POLISHED or PLATED LOOK

again ( Refer to PHOTOS in this ad )

Average installation time for 2 rotors ...About 30 minutes

Rivets ...Some Corvette C2 C3 Rotors have

one or more large rivets to the brake hub.

Simply drill out this Rivet and INSTALL NEW ROTOR OVER LUG STUDS

The rotor rivet was used at GM Factory assembly only to speed up assembly time

Wilwood

Set of 2 ROTORS

TWO Promatrix REAR

Replacement Rotors.

11.75" X 1.25"

Crosss Drilled & Slotted

SRP Rotors

ProMatrix Rear Rotor Kits offer measurable brake performance improvements to racers and enthusiasts using the OE factory brake calipers

and BONUS PERFORMANCE when you add the optional

Wilwood 4 or 6 Piston Front Calipers and Rear Calipers

Featured in our other Wilwood Ads

( Note ..this auction is for ROTORS only )

High performance pad compounds are specially selected to provide increased brake response and higher resistance against fade.

One-piece directional vane GT rotor kits provide high temperature durability

for the track.

SRP drilled and slotted black e-coat rotor kits provide

high-tech style with corrosion resistance, durability,

and firmer response with reduced deflection under load.

These are direct replacement

High Performance Rotors

Visit My eBay Store

MEMO ... We are Davis Motorports of Reno LLC

We have been in business since 1958 and we have been a WILWOOD MASTER

WAREHOUSE DISTRIBUTOR since 1971-1972 until now !

Our Founder / Owner Richard Davis has been an avid Corvette Owner Collector Builder

since 1964 !

Ebay (not us) Is now adding Internet sales tax to orders.

It is being done to all ebay sales. (Not just ours)

DRIVING STYLE

Performance / Racing

ROTOR STYLE

Drilled & Slotted

ROTOR CONSTRUCTION

1-Piece

ROTOR TYPE

Vented

ROTOR MATERIAL

Cast Iron

ROTOR DIAMETER

298.45mm (11.75")

NOMINAL THICKNESS

31.75mm (1.25")

APPLICATION

1982 Chevy Corvette;These products are designed to fit OE Factory Spindles.
1981 Chevy Corvette;These products are designed to fit OE Factory Spindles.
1980 Chevy Corvette;These products are designed to fit OE Factory Spindles.
1979 Chevy Corvette;These products are designed to fit OE Factory Spindles.
1978 Chevy Corvette;These products are designed to fit OE Factory Spindles.
1977 Chevy Corvette;Base;These products are designed to fit OE Factory Spindles.
1976 Chevy Corvette;These products are designed to fit OE Factory Spindles.
1975 Chevy Corvette;These products are designed to fit OE Factory Spindles.
1974 Chevy Corvette;Base;These products are designed to fit OE Factory Spindles.
1973 Chevy Corvette;Base;These products are designed to fit OE Factory Spindles.
1972 Chevy Corvette;Base;These products are designed to fit OE Factory Spindles.
1971 Chevy Corvette;Base;These products are designed to fit OE Factory Spindles.
1970 Chevy Corvette;These products are designed to fit OE Factory Spindles.
1969 Chevy Corvette;Base;These products are designed to fit OE Factory Spindles.
1968 Chevy Corvette;Base;These products are designed to fit OE Factory Spindles.
1967 Chevy Corvette;These products are designed to fit OE Factory Spindles.
1966 Chevy Corvette;Rear Disc Brakes;These products are designed to fit OE Factory Spindles.
1965 Chevy Corvette;Rear Disc Brakes;These products are designed to fit OE Factory Spindles.

CONDITION

100% Brand New with Full Factory Warranty

PART NUMBER

140-11739-D

MOST OFTEN we can ship in 1-3 days .... and we

will WHENEVER POSSIBLE ... Notify us when your order is URGENT and we will do

our best for you ....

The HANDLING TIME is only when we have to USE DIRECT SHIPMENT when no-one

else has your part numbers .The handling time will revise from week to week based on

current stock. We sell approx 200 Wilwood and QA1 kits per week and often the in stock

levels change from hour to hour... THANK YOU ...you are our very valued customer

RETURN POLICY

Return shipping paid by: Buyer
Item must be returned within: 30 Days
Refund will be given as: Money Back

ABOUT THE BRAND

Wilwood Engineering designs and manufactures high-performance disc brake systems. Since the company’s inception in 1977 by Bill Wood, we have developed a substantial matrix of brake components and engineering techniques that allow us to quickly and reliably create brake systems for almost any application. Our core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.

With headquarters in Camarillo, California, Wilwood employs approximately 250 people. We have on-shelf stock of more than 300 different brake calipers, 200 rotor designs, 100 master cylinder designs and a wide assortment of brackets, fittings, valves and brake lines. Our off-shelf brake calipers range in size from tiny calipers used on go-carts and light duty industrial equipment, to heavy duty original equipment brakes for the U.S. military Humvee.

Wilwood's engineering department uses the latest computer-aided design and manufacturing techniques in conjunction with finite element analysis, dynamic test and cycle test equipment, to find high-performance and reliability solutions for the most difficult braking tasks. Our extensive inventory of proprietary on-the-shelf components allow us to provide cost-effective solutions for unique brake applications.

Wilwood is ISO 9000 compliant and has extensive experience maintaining quality levels of 100ppm or less for original equipment manufacturers.