A thermostat has two important functions which help keep an engine at its optimal temperature:stays closed when the engine is below temperatureopens gradually as the engine heats up

1.stays closed when the engine is below temperature

2.opens gradually as the engine heats up

Stays Closed - the thermostat should be closed when the engine is cold so that the block can reach its optimal operating temperature as quickly as possible. With the thermostat closed, coolant circulates inside the block but does not pass through the heat exchanger, where it would be cooled. Raw water from the raw water pump bypasses the engine but still flows through the heat exchanger and exhaust elbow.

Thermostat Opens - thermostats are designed to open gradually as the coolant/raw water in the engine blocks heats up, allowing hot coolant to pass through the heat exchanger (in indirect cooled engines) or for raw water to pass through the engine (in direct cooled engines) and out the exhaust.

If the thermostat does not open, the engine will overheat, causing a temperature alarm to sound and risking engine seizure.

Thermostats are generally very reliable, but should be removed if:

1.malfunction is suspected and thermostat needs to be tested     

2.to fill the lower part of the block with antifreeze to protect a direct cooled engine from frost damage

Be sure to have a new gasket ready before opening the thermostat housing, because the old gasket will likely tear (due to age and heat). If a torn gasket is re-used it will likely leak under pressure.