Part Number:

OE # 25799194
OE # 25799193
Partslink GM2503283
Partslink GM2502283
DEPO 335-1147R-AF
DEPO 335-1147L-AF
Hollander 114-01014L
Hollander 114-01013R

 

 

Bulb type:

High Beam: 9005(Not included)
Low Beam: 9006(Not included)

 

 

Fitment:

2007 GMC Sierra 1500 GMC Sierra 1500 New Body Style Headlight Set
2008-2013 GMC Sierra 1500 GMC Sierra 1500 Headlight Set
2007 GMC Sierra 2500 HD GMC Sierra 2500 HD New Body Style Headlight Set
2008-2014 GMC Sierra 2500 HD GMC Sierra 2500 HD Headlight Set
2007 GMC Sierra 3500 HD GMC Sierra 3500 HD New Body Style Headlight Set
2008-2014 GMC Sierra 3500 HD GMC Sierra 3500 HD Headlight Set

 

 

Package Included:

One Set Headlights (Left+Right)

 

 

TIPS:

①.Installation Guide:

1.Undo the screws, clips, or retainer springs that hold the headlight in place.

2.Disconnect the wiring from the assembly.

3.Detach the headlight from the vehicle to replace it with a new one.

4.Fit in the new headlight assembly.

5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.

6.Reconnect the wiring that was unplugged from the assembly.

7.Put back the grille and other components that you removed. Seal them back into place.

8.Test the new assembly.

②.Adjustment Guide:

Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.

1.Find the adjustment screws. 

Firstly, locate the adjustment screws on your vehicle.

2.Adjust the headlight individually.

Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.

3.Adjust the vertical field. 

The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.

4.Test your results.

 

 

Feature

 

• *[SAFE & DURABLE] The advanced lenses helps to achieve better visibility and more focused beams, making them a brighter alternative to old, dim or yellow headlamps. Maintaining your vehicle's headlights is crucial to your safety on the road and the safety of others, especially in bad weather or at night.
• *[HIGH COMPATIBILITY] Our headlight assembly is designed for the specified vehicle models with high compatibility. It can serve as original equipment replacement, all the OE parts are 100% standard. 
• *[QUALITY ASSURANCE] DOT(US Department of Transportation)&SAE(US Society of Automotive Engineers) Approved. Moreover, we provide a 5-year warranty and a 60-day free return to ensure your satisfaction with our products.
• *[WEATHER-SEALED DESIGN] The product is made from sturdy aviation materials, so it can work normally at temperatures from -40°C to 80°C. Whether rainy, snowy, or sandstorm, the headlight assembly can operate well
• *[EASY TO INSTALL] The headlight assembly is designed in a 1:1 ratio. So it is no need to master modification skills or drilling. Just Plug-and-Play.

 

 

How To Adjust:

      Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 

feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 

feet above the ground.

1. Find the adjustment screws.Firstly, locate the adjustment screws on your vehicle.

 

2. Adjust the headlight individually.The headlights should be adjusted one at a time. Put a rag or towel over a chair 

      in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.

 

3. Adjust the vertical field.The screw on the top of the light housing should be turned clockwise to raise the lights and

      counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the 

      light beam shines directly on or just below the center of the tape line on the wall.

 

4. Test your results.

 

 

Installation steps：

• Undo the screws, clips, or retainer springs that hold the headlight in place.
• Disconnect the wiring from the assembly.
• Detach the headlight from the vehicle to replace it with a new one.
• Fit in the new headlight assembly.
• Fix the new headlight into place and make sure that the screws,clips, or retainer springs used are sealed.
• Reconnect the wiring that was unplugged from the assembly.
• Put back the grille and other components that you removed. Seal them back into place.
• Test the new assembly

​