• Fitment:
  •  
  • 2006-2009 Ford Fusion
    2006 Lincoln Zephyr
    2006-2009 Mercury Milan 
  • Notes:
  • The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.
  •  
  • Step 1: Locate the Radiator Cooling Fan
  • Engine Radiator and Cooling Fan Assembly For 2006 2007 2008 2009 Mercury Milan

    Fitment:

     

    2006-2009 Ford Fusion
    2006 Lincoln Zephyr
    2006-2009 Mercury Milan

     

    Notes:

    The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.

     

    Step 1: Locate the Radiator Cooling Fan

    Locating the radiator cooling fan is the first step in replacing it. Turn off your car and allow it to cool off. Open the hood of your car and you will be able to see the radiator that is located at the back of the grill at the front portion of your engine compartment. The radiator cooling fan is attached at the back of the radiator through a mounting frame. Under the engine and the radiator is a sticking cylinder that is encased in a small casing. That is the radiator cooling fan motor that you may need to change or repair other than the radiator cooling fan itself.

     

    Step 2: Disconnect the Power Supply

    On the fan motor is an electric cable running towards the engine. Find the connector of the wires from your engine and from your radiator fan motor and disconnect it. Using two masking tapes with different colors, note the connection of the wires so that you will not have a hard time reconnecting the wires later.

     

    Step 3: Remove the Fan Housing

    Using a crescent wrench, remove the four screws located at each corner of the fan housing. Remove the fasteners at the sides of the fan housing as well.  A radiator cooling fan housing is relatively large and you may need to remove all the obstructions like hoses and wirings so that you can extract the fan housing off your car hood. Hold the housing firmly and lift it off your engine compartment. Be careful in removing the fan housing to avoid damaging it. Place the fan housing on a clutter-free working table.

     

    Step 4: Remove the Radiator Cooling Fan and the Fan Motor

    The fan blade is either pinned or screwed to a shaft. With a screwdriver, loosen the fan blade and slide if off its shaft. You may need to remove a keeper that prevents the fan blades from moving up in the shaft up and down. As to the fan motor itself, remove it from the fan housing using a screwdriver.

     

    Step 5: Attach the Replacement  Radiator Cooling Fan and Fan Motor

    Install the new fan motor into the fan housing. Slide your replacement radiator cooling fan into the shaft, insert the keeper and secure the new cooling fan and keeper into place. Return the fan housing back into its proper place and secure the screws and the fasteners. Reattach the hoses and wires you removed in step 3. Connect the fan motor into the car electrical system using the electrical tape guide you made in step 2. You just learned how to replace your radiator cooling fan as well as your radiator cooling fan motor.

     

    Radiator Notes:

    Specification:

    Core Material: Aluminum

    Tank Material: Plastic

    Quantity: 1pcs Radiator

    Warranty:1 Year limited

    Direct Replacement

    100% brand new radiator (as picture showed)

    --------------------------------------------

    ? Installation guidelines provided in the box

    ? Premium OE hardware and fittings included in every box

    ? OE design to ensure exact fit, form and function for an easy drop-in installation

    ? Maximum cooling efficiency and perfect fit

    ? Leak-tested aftermarket radiator

    ? SO 9001 certified manufacturing plants

     

    How to replace a new radiator?

    1. Disconnect the battery.

    2. Drain the radiator fluid into a suitable container.

    3. Remove the old radiator:

    -Take off any plastic covers around the radiator.

    -Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.

    -Disconnect the radiator hoses from the radiator.

    -Disconnect the transmission cooling lines from the bottom of the radiator.

    -Remove any clamps, brackets, or screws holding the radiator inside its frame.

    -Lift the radiator up and out of the car.

    4. Install the new radiator:

    -Slide the new radiator into place.

    -Connect any clamps or brackets that hold the radiator in place.

    -Connect the transmission cooling lines carefully.

    -Connect the engine cooling hoses to the radiator.

    -Replace the fan and fan shroud.

    -Reconnect the fan electrical connection.

    -Replace the plastic covers.

    5. Fill the radiator with fluid.

    6. Check your work to make sure that there are no leaks.

    (Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)

    Note:Do please keep children and pets away when replacing the radiator)

    -----------------------------------------------------------------------------

    Attention:

    ? project operation, the vehicle normal temperature 60 to 80 degrees.

    ? add detergent if the tank is too full can take some antifreeze.



    content_src_url


    Item Specifics
    Condition :New
    Brand :Topcn
    Manufacturer Part Number :TP837455CN
    Warranty :1 Year
    Interchange Part Number :Engine Radiator and Cooling Fan
    Other Part Number :12v Electric Radiator and Cooling Fan Assembly
    Superseded Part Number :Engine Electric Radiator and Cooling Fan
    Fitment Type :Direct Replacement
    Type :Radiator and Cooling Fan
    Placement on Vehicle :Front
    Color :as picture show
    Package Include :1pcs Radiator,1pcs Cooling Fan

    Shipping

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
    3.Local pick up is not available.
    4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
    5.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 

    Payment

    We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.

    Returns

    1.All of our brand new items come with a 60-Days money-back guarantee.
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
    5.Shipping& handling cost are not refundable. 
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
    7.No product liability insurance is assumed.
    8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. 

    Customer Services

     Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 

    Feedback

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    Shop Category
    Engine Radiator and Cooling Fan Assembly For 2006 2007 2008 2009 Mercury Milan

    Fitment:

     

    2006-2009 Ford Fusion
    2006 Lincoln Zephyr
    2006-2009 Mercury Milan

     

    Notes:

    The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.

     

    Step 1: Locate the Radiator Cooling Fan

    Locating the radiator cooling fan is the first step in replacing it. Turn off your car and allow it to cool off. Open the hood of your car and you will be able to see the radiator that is located at the back of the grill at the front portion of your engine compartment. The radiator cooling fan is attached at the back of the radiator through a mounting frame. Under the engine and the radiator is a sticking cylinder that is encased in a small casing. That is the radiator cooling fan motor that you may need to change or repair other than the radiator cooling fan itself.

     

    Step 2: Disconnect the Power Supply

    On the fan motor is an electric cable running towards the engine. Find the connector of the wires from your engine and from your radiator fan motor and disconnect it. Using two masking tapes with different colors, note the connection of the wires so that you will not have a hard time reconnecting the wires later.

     

    Step 3: Remove the Fan Housing

    Using a crescent wrench, remove the four screws located at each corner of the fan housing. Remove the fasteners at the sides of the fan housing as well.  A radiator cooling fan housing is relatively large and you may need to remove all the obstructions like hoses and wirings so that you can extract the fan housing off your car hood. Hold the housing firmly and lift it off your engine compartment. Be careful in removing the fan housing to avoid damaging it. Place the fan housing on a clutter-free working table.

     

    Step 4: Remove the Radiator Cooling Fan and the Fan Motor

    The fan blade is either pinned or screwed to a shaft. With a screwdriver, loosen the fan blade and slide if off its shaft. You may need to remove a keeper that prevents the fan blades from moving up in the shaft up and down. As to the fan motor itself, remove it from the fan housing using a screwdriver.

     

    Step 5: Attach the Replacement  Radiator Cooling Fan and Fan Motor

    Install the new fan motor into the fan housing. Slide your replacement radiator cooling fan into the shaft, insert the keeper and secure the new cooling fan and keeper into place. Return the fan housing back into its proper place and secure the screws and the fasteners. Reattach the hoses and wires you removed in step 3. Connect the fan motor into the car electrical system using the electrical tape guide you made in step 2. You just learned how to replace your radiator cooling fan as well as your radiator cooling fan motor.

     

    Radiator Notes:

    Specification:

    Core Material: Aluminum

    Tank Material: Plastic

    Quantity: 1pcs Radiator

    Warranty:1 Year limited

    Direct Replacement

    100% brand new radiator (as picture showed)

    --------------------------------------------

    ? Installation guidelines provided in the box

    ? Premium OE hardware and fittings included in every box

    ? OE design to ensure exact fit, form and function for an easy drop-in installation

    ? Maximum cooling efficiency and perfect fit

    ? Leak-tested aftermarket radiator

    ? SO 9001 certified manufacturing plants

     

    How to replace a new radiator?

    1. Disconnect the battery.

    2. Drain the radiator fluid into a suitable container.

    3. Remove the old radiator:

    -Take off any plastic covers around the radiator.

    -Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.

    -Disconnect the radiator hoses from the radiator.

    -Disconnect the transmission cooling lines from the bottom of the radiator.

    -Remove any clamps, brackets, or screws holding the radiator inside its frame.

    -Lift the radiator up and out of the car.

    4. Install the new radiator:

    -Slide the new radiator into place.

    -Connect any clamps or brackets that hold the radiator in place.

    -Connect the transmission cooling lines carefully.

    -Connect the engine cooling hoses to the radiator.

    -Replace the fan and fan shroud.

    -Reconnect the fan electrical connection.

    -Replace the plastic covers.

    5. Fill the radiator with fluid.

    6. Check your work to make sure that there are no leaks.

    (Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)

    Note:Do please keep children and pets away when replacing the radiator)

    -----------------------------------------------------------------------------

    Attention:

    ? project operation, the vehicle normal temperature 60 to 80 degrees.

    ? add detergent if the tank is too full can take some antifreeze.



    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
    2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
    3.Local pick up is not available.
    4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
    5.International Buyers C Please Note:
    a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
    b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 

    We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.

    1.All of our brand new items come with a 60-Days money-back guarantee.
    2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost. 
    5.Shipping& handling cost are not refundable. 
    6.Man-made damage by abuse or wrong operation is not covered by this warranty.
    7.No product liability insurance is assumed.
    8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax. 

     Q: How do I pay for my purchase?
    A: MY store accepts PayPal. 
    Q: When will the item be shipped out?
    A: This item will be shipped with 2 business day once payment completed.
    Q: Where is my tracking number?
    A: Please log on your account, click "my eBay"-->"my summary", or open your email box and find the shipping notification email.
    Q: How do I return an item?
    A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. 

    1. We will leave positive feedback once we get your payment. 
    2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
    3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.


    Copyright of Topcn-autoparts. All rights reserved.