Product Feature:

. Application: Compatible with Minn Kota Props: MKP 33 & MKP 38 Weedless Wedge 2 (part number 233160/1865018).

. High Performance: MKP-34 prop and nut kit E allows you easy to quickly replace/change out your propeller or broken shear pin, correct propeller mounting prevents damage and leakage. Comparable to OEM part number 1865019 both quality and functions.

. Function: MKP-34 prop and nut kit E allows you easy to quickly replace/change out your propeller or broken shear pin.

. Easy & Convenient to Use: This kit is specially designed to be used with the MKP-33 and MKP-38 propellers. Quickly and easily remove or repair the props with this kit, which are available in different sizes to fit for various MKP dimensions (3/8", 1/2" and 5/16").

. Superior Material: Made from top quality steel, high strength, prevent corrosion and rust, wear and impact resistance, sturdy and durable. High precision and hardness ensure long term reliable service.

. Satisfaction Guarantee: If you're not satisfied with this MKP-34 Prop & Nut Kit E 1865019, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service.

Product Description:

We recommend that you periodically remove the prop to check for foreign debris or fishing line that may have gotten behind the prop. If always left there, the fishing line can actually damage the moto prop shaft seals, allowing water to enter into the lower unit. And this could result in a costly repair.

This kit can meet your need - prop nut, pin and washer are all included. Great for complete backup for parts on your trolling motor. You own this extra prop which is always handy in an emergency.

Compatible with Minn Kota Props: MKP-33 & MKP-38 Weedless Wedge 2 (part number 233160/1865018).

Propeller Replacement Guides:

Step 1. Disconnect the motor from the battery before changing the propeller;

Step 2. Hold the propeller and loosen prop nut with pliers or wrench;

Step 3. Remove prop nut and washer. If drive pin is sheared/broken, you will need to hold the shaft steady with a screwdriver blade pressed into the slot on the end of the shaft;

Step 4. Turn the old prop to horizontal for preventing the drive pin from falling out, and pull it straight off. If drive pin falls out, push it back into the armature shaft;

Step 5. Align new propeller with the drive pin;

Step 6. Install prop washer and prop nut;

Step 7. Tighten prop nut 1/4 turn past snug, [25-35 inch lbs.].

Be careful: Over tightening prop nut can damage prop and bend the drive pin.

Package Details:

2 x 2093101 3/8"-24 Prop Nuts, 2 x 2262658 1" x 3/16" Large Shear Pins and 2 x 2091701 Washers. (Warm Tips: A crescent or socket wrench are required in order to install or tighten the nuts properly.)