3M Roll Uncut Window Film Tint VLT 0.5 20" x 10ft Car Feet Home Glass Office

Features:

Sun block effect,uv protection,heat protection,keep your car cooler,help save energy costs
It also gives our films a stylish look with outstanding color stability, and provides high heat rejection with no signal interference
UV-proof Blocking 99% of the UV, care of your skin.
Scratch resistant 99% , 65% Heat Regjection
Lasts 5-7 years on the outside of your vehicle without fading, cracking or peeling.

Specifications

Size: 50cm*3m

Light transmittance: 50%

Installation location: front and rear windshield, car window, sunroof, etc.

Suitable models: general-purpose

Product function: strong heat insulation, block ultraviolet rays, protect privacy, protect car windows

Characteristic:

1. Super heat insulation, driving during the day and night, the vision is still clear

2. Protect the car windows and prevent damage to the glass surface

FITTING INSTRUCTIONS:

1. Measure the size of the car glass, the length and width of each plus more than 3 cm, so as not to install the glass is not standard film leakage¡

2. A clean window is vital a successful installation,so keep Window or Glass clean.

3. Remove the clear backing sheet from Film .Use your spray bottle to cover the entire surface of the film with soapy water.This helps to prevent the film becoming tangled and sticking to itself.

4. Pick up your film and apply to your window( Please MAKE SURE you have removed it before you apply the window film to glass).The soapy water solution on the film and the glass will allow you to slide it into correct position.

5. And repeat the squeegee process,using the squeegee to push any remaining moisture or bubbles to the edge of the window.Much easier than Wall Decals, it's no problem for you!Step 6. Finally use the paper towels to dry the window and the frame,being carefully not to lift the film at the edges or corners.Enjoy your works!

Packing included：
car window film*1

scraper*1

knife*1 (random color)

Item Specifics
Features	Heat Repellent
Manufacturer Warranty	2 Year
OE/OEM Part Number	HighQualiy
Fitment Type	Direct Replacement
Light transmittance	50%
Size	50cm*3m
Universal Fitment	Yes
Placement on Vehicle	Left, Right, Front, Rear, Upper, Lower
Visible Light Transmission	50%
Manufacturer Part Number	50% window tint
Brand	Unbrand
Color	Black
Type	Uncut Roll Window Tint Film
Film Thickness	50µm
Universal Fitment	Yes

FAQ

♥ If you have a decoding problem or any other problems, please contact us first, we will help you with it. We will reply you within 24 hours in working days. I'm a new seller, thanks a lot for your trust and convince! I will serve you with all my heart. ♥

Q1: Will this bulb fit my vehicle?
A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include some vehicle fitments per listing,

but if your vehicle does not show up on the compatibility table at the top of our listings,

welcome you to contact us for free consulation before purchasing a product.

Q2: My item has not arrived, what's taking so long?
A: Sometimes items take longer than expected, especially if it’s going far or to rural area.

Check with your post office to see if your item has been held up.

Sometimes Royal Mail will not update a tracking number until it has arrived at its destination.

If your item still don't arrive after a few days, let us know so we can double check for you and help solve it asap.

Q3: My bulbs won't fit, help!
A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
The bulb size may be wrong, double check the item you received with the item you ordered.
Do you have an aftermarket lighting housing?

These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.

Q4: Neither side lighting up? Both sides flicker, hyper flash, or work inconsistantly.
A:Check the light fuses, and then check the ballast plugs to insure correct installation.

If this doesn't work, there may be a voltage problem with the vehicle.

You probably just need a relay or capacitor. Even though some bulbs are builtin resistors, they may still need a decoder.

Pay & Ship

(1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

(2). Before payment, please keep the consistency of Paypal address and ebay address.

(3). Quantity orders are welcome!

Returns

(1). We offer 60 days free return policy.Please contact us within 60 days from the date you receive your order

if you have any issues with the product or want return. Refund will be send after we got your resend package.

(2). All returned items should be in the original packaging , return tracking information should be provided .

(1).Negative feedback will not help resolve any problems you have,please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

(2).We maintain high standards of excellenceand strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately before you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

About us

We're professional in car and motorcycle accessories, especially in LED bulbs. We have our own factory and R&D team.

Our belief is to sell top quality items that fit your car and serve you with our heart. Anything please feel free to contact us! Our customer service is very responsibility. Come and follow us!