• 12 Terminal Power Distribution Block180A 12V DC Black & Red Pair
  •  
  • Specifications:
  • Max continuous current: 180 amps @ 12 vdc - 15 amps per connection
  • Max intermittent current: 20 amps per connection (less than 1 minute)
  • Max voltage: 48vdc
  • 12 connection points, #8-32 stainless steel screws
  • 1/4" stainless steel terminal post
  • Stainless steel hex nuts and lock washer
  • Base Material: Glass-Filled Nylon (Red & Black)
  • Mounting screws: #10 (not included)
  • Length and width: 5-5/16" x 1-1/8" (135mm x 30mm)
  •  
  • Features:
  • *Ideal for Automotive, Solar and Marine Use
  • 2 Pair 12 Point Bus Bar Power Distribution Block 180A 12V DC Pair Black & Red

    12 Terminal Power Distribution Block180A 12V DC Black & Red Pair

     

    Specifications:

    Max continuous current: 180 amps @ 12 vdc - 15 amps per connection

    Max intermittent current: 20 amps per connection (less than 1 minute)

    Max voltage: 48vdc

    12 connection points, #8-32 stainless steel screws

    1/4" stainless steel terminal post

    Stainless steel hex nuts and lock washer

    Base Material: Glass-Filled Nylon (Red & Black)

    Mounting screws: #10 (not included)

    Length and width: 5-5/16" x 1-1/8" (135mm x 30mm)

     

    Features:

    *Ideal for Automotive, Solar and Marine Use

    These busbar blocks have a max continuous rating of 180 amps.  Each connection is rated for 15 amps continuously with a max intermittent rating of 20 amps.  Max voltage of 48VDC.  Ideal for automotive, car audio, solar, and marine use.

    *Red and Black Connectors

    With these 2 packs of 12 terminal power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals Wire up to a dozen accessories with these 2 packs of power distribution bus bars.

    *Anti-Corrosive & Even Consistent Flow 

    Our bus bars are anti-corrosive and constructed to handle high currents.  The base material is glass filled nylon and a 1/4” stainless steel hex nut and lock washer. It includes a cover and a terminal boot to insulate and protect connections for damage and corrosion.

    *Keep Your Wires Neatly Organized

    With these power distribution blocks, you can finally organize your wiring, so it doesn't look like a rat’s nest under the hood.  Use our power distribution bars for your car, truck, RV, boat, Yacht, Solar systems, and any other cable combination.

    *Stable Performance

    The power distribution block with stable performance provides a better shopping experience for our customers.

     

    Packaging include:

    12 Terminal Power Distribution Block*2  

    Wire Lugs*2

     

    Note:
    1.Please allow 1-2cm differs due to manual measurement.
    2.The real color of the item may be sligtly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    3.For any questions please feel free to contact us.

     


    Item Specifics
    Brand Unbranded
    Manufacturer Part Number JXP-12-180A
    Manufacturer Warranty 1 Year
    Max continuous current 180 amps @ 12 vdc - 15 amps per connection
    Max intermittent current 20 amps per connection (less than 1 minute)
    Max voltage 48vdc
    Base Material Glass-Filled Nylon (Red & Black)
    Length and width 5-5/16" x 1-1/8" (135mm x 30mm)
    Color Black & Red
    Mounting screws #10 (not included)
    Custom Bundle No
    Bundle Description N/A
    Modified Item No
    Modification Description N/A
    Non-Domestic Product Yes

    Payment
    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 1 business day.
     
    (2). Before payment, please keep the consistency of Paypal address and ebay address.
     
    (3). Quantity orders are welcome!
    Shipping
    (1).We will ship item locally for US buyers. If you don't get it on time, please contact us firstly, we'll try our best to support you.
     
    (2).For US customers, all items will be shipped out within 1 business day, the carrier is USPS.
    Returns
    (1). We offer 30 days free return policy. Please contact us within 30 days from the date you receive your order if you have any issues with the product or want return. Refund will be send after we got your resend package.
     
    (2). All returned items should be in the original packaging , return tracking information should be provided .
    Contact Us
    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.
     
    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.
     
    (3).We're AUXITO official store. Our office hours are Monday - Friday 9:00AM - 6:00PM PST, but we will reply once we get your message. There will be some delay of response if you send message or E-Mail on weekend.
    FAQ
    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include some vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes Royal Mail will not update a tracking number until it has arrived at its destination. If your item still don't arrive after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q4: Neither side lighting up? Both sides flicker, hyper flash, or work inconsistantly.
    A:Check the light fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor. Even though some bulbs are built-in resistors, they may still need a decoder.
     
     If you have a decoding problem or any other problems, please contact us first, we will help you with it. We will reply you within 24 hours in working days. I'm a new seller, thanks a lot for your trust and convince! I will serve you with all my heart. 

    Picture
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    2 Pair 12 Point Bus Bar Power Distribution Block 180A 12V DC Pair Black & Red

    12 Terminal Power Distribution Block180A 12V DC Black & Red Pair

     

    Specifications:

    Max continuous current: 180 amps @ 12 vdc - 15 amps per connection

    Max intermittent current: 20 amps per connection (less than 1 minute)

    Max voltage: 48vdc

    12 connection points, #8-32 stainless steel screws

    1/4" stainless steel terminal post

    Stainless steel hex nuts and lock washer

    Base Material: Glass-Filled Nylon (Red & Black)

    Mounting screws: #10 (not included)

    Length and width: 5-5/16" x 1-1/8" (135mm x 30mm)

     

    Features:

    *Ideal for Automotive, Solar and Marine Use

    These busbar blocks have a max continuous rating of 180 amps.  Each connection is rated for 15 amps continuously with a max intermittent rating of 20 amps.  Max voltage of 48VDC.  Ideal for automotive, car audio, solar, and marine use.

    *Red and Black Connectors

    With these 2 packs of 12 terminal power distribution blocks, you will have plenty of connection points for both positive and negative wiring terminals Wire up to a dozen accessories with these 2 packs of power distribution bus bars.

    *Anti-Corrosive & Even Consistent Flow 

    Our bus bars are anti-corrosive and constructed to handle high currents.  The base material is glass filled nylon and a 1/4” stainless steel hex nut and lock washer. It includes a cover and a terminal boot to insulate and protect connections for damage and corrosion.

    *Keep Your Wires Neatly Organized

    With these power distribution blocks, you can finally organize your wiring, so it doesn't look like a rat’s nest under the hood.  Use our power distribution bars for your car, truck, RV, boat, Yacht, Solar systems, and any other cable combination.

    *Stable Performance

    The power distribution block with stable performance provides a better shopping experience for our customers.

     

    Packaging include:

    12 Terminal Power Distribution Block*2  

    Wire Lugs*2

     

    Note:
    1.Please allow 1-2cm differs due to manual measurement.
    2.The real color of the item may be sligtly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    3.For any questions please feel free to contact us.

     



    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 1 business day.
     
    (2). Before payment, please keep the consistency of Paypal address and ebay address.
     
    (3). Quantity orders are welcome!
    (1).We will ship item locally for US buyers. If you don't get it on time, please contact us firstly, we'll try our best to support you.
     
    (2).For US customers, all items will be shipped out within 1 business day, the carrier is USPS.
    (1). We offer 30 days free return policy. Please contact us within 30 days from the date you receive your order if you have any issues with the product or want return. Refund will be send after we got your resend package.
     
    (2). All returned items should be in the original packaging , return tracking information should be provided .
    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.
     
    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.
     
    (3).We're AUXITO official store. Our office hours are Monday - Friday 9:00AM - 6:00PM PST, but we will reply once we get your message. There will be some delay of response if you send message or E-Mail on weekend.
    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include some vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes Royal Mail will not update a tracking number until it has arrived at its destination. If your item still don't arrive after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q4: Neither side lighting up? Both sides flicker, hyper flash, or work inconsistantly.
    A:Check the light fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor. Even though some bulbs are built-in resistors, they may still need a decoder.
     
     If you have a decoding problem or any other problems, please contact us first, we will help you with it. We will reply you within 24 hours in working days. I'm a new seller, thanks a lot for your trust and convince! I will serve you with all my heart. 

    All rights reserved.