Brand New!
Premium Quality Genuine Leather Luggage Set
Now on Sale!
MSRP $193.99
*
7pc
Heavy Duty Motorcycle Bag Set
*
Genuine
High Quality Buffalo Leather
* Big
Sissy T Bar Travel Luggage bag
* Quick
Snap Buckle Closures
* Patchwork
Style Design
*
60%
of Retail Price
* Free
Rain Covers
* Pair of Saddlebags
*
Sissy Bar Bag
* Free
Rain Covers
* Backpack
Bag
*
Windshield
Bag
* Barrel
Bag
* Tool
Bag
7pc Travel Luggage Set Features
Saddlebags zips on and off for quick and easy removal so that you can take them with you. The two sides lace together and mount underneath the seat. Saddlebags don't require any additional mounting hardware. Saddlebgas comes with free rain covers. The Barrel Bag is for the luggage rack and has one outside snap pocket, 2 hidden pockets on each end, additional straps for strapping on extra stuff like bedrolls, jackets, etc. and has a reinforced carry strap.The Backpack bag comes With padded shoulder straps, hand-grip, and drawstring closure main compartment.
The Sissy Bar Bag attaches to sissy bar with leather strap. Features double strap closure and flaps close over opening for protection. The Windshield Bag bolts to the windshield and is perfect for gloves, cell phone, pens and other small items. The Tool Bag attaches by straps to the front fork or on the frame.
Easy on and off means you can turn your sleek boulevard cruiser into a touring bike in a matter of minutes.This is a great way to travel. This bag set also makes a perfect gift .
Includes Pair of Saddle Bags : 14" x 10" x 5-1/4"
Backpack : 11" x 14" x 4-3/4"
Barrel Bag : 14-3/4" x 9-3/4" x 9-3/4"
Sissy Bar Bag : 7-1/2" x 8-1/2" x 3"
Windshield Bag : 9-1/4" x 6" x 2-1/2"
Tool Bag : 10" x 5" x 2"
Weight : 13.4 lbs
Below is a guideline for determining if a set of saddlebags will
fit on your bike. It works in most cases, but not all
First you'll need a
ruler or measuring tape.
A. Take a side to side
measurement: Measure side to side, from the back of the saddle, (riders
position) to the arm of the directional signal, you'll need to compare this
measurement with our length measurements of the desired saddlebag. This
measurement should be greater than the bags length. (See image below for
reference)
B. Take a top to bottom
measurement. Measure from the bottom of the seat pad to the top of the exhaust
pipe as a reference. This measurement must be at least 1" inch greater
than the height of the desired saddlebags (see picture below for reference).
Measurement of bag are given in the item description above.
Instructions for
Installing Saddlebags
Things You'll Need:
Screwdriver
Drill
Saddlebags,
yoke with ties
Step
1
Use a screwdriver to
remove the screws securing the motorcycle seat to the frame. Slide the seat
forward then backward to remove the keyhole and tank brackets. A single
screwdriver should be sufficient to remove the seat, depending on the bike
model.
Step
2
Untie the yoke, which
is usually held together with leather or nylon strips. The yoke is the part of
the saddle bags that goes under the seat.
Step
3
Place each saddle bag
where you want them to sit on your bike. The yoke lays under the seat, with a
saddle bag on each side of the bike. The best location is usually over the
shocks.
Step
4
Mark where the yoke
is positioned over the hardware on the bike and where it overlaps, using a
permanent marker.
Step
5
Remove the saddle
bags. Lay them flat on the ground and place the yoke over an object, such as an
old phone book. Make sure the marks you made line up with each other and that
the pre-made holes line up. If they do not, drill holes through the yoke and
tie them together with a strip of leather taken from the yoke. You are
basically re-threading the yoke's ties.
Step
6
Place the saddle bags
back on your bike and position them.
Step
7
Reinstall the
motorcycle seat by replacing the screws.
Step
8
Examine the saddle
bags to make sure they are not resting on anything that may become entangled
with them.
| 
