Year Make Model Engine 2011-2014 Ford F-150 3.7L 2011-2014 Ford F-150 3.5L 2015-2017 Ford Expedition 3.5L
Item Description: ✅100% Brand New in Box With Customized Packaging, Never Been Installed Before ✅ OE Design For Direct Fit, Form And Function For An Simple And Fast Installation ✅ Built With High Density Multi-Lowered Fins For Maximum Cooling Efficiency ✅ Gasket And O-Rings Are Thermal Shocked To Ensure Durability in Extreme Cold Weather ✅ Every Radiator is Subjected To An Aging and Endurance Test in Order To Validate its Performance Under Extreme Weather Conditions ✅ Engineered To Stringent Tolerances Designed By Manufacturer's in House Engineering Team To Ensure Perfect Performance
Package includes
1x Radiator
1x Using Guide
Item Specifics
UPC
997751185554
MPN
MN185554
Manufacturer Part Number
MN185554
Brand
KAC
Fitment Type
Direct Replacement
Manufacturer Warranty
5 Years
California Prop 65 Warning
This product can expose you to chemical which is known to the State of California to cause cancer and birth defects or other reproductive harm.
OE/OEM Part Number
13226, 13228, 13229, 2219270, 8013226
Interchange Part Number
BL3Z8005B, BL3Z8005C, CU13226, FO3010310
Superseded Part Number
Q13229, RAD13226, RAD13228, RAD13229, TYC13229
Payment
Paypal only, eCheque will be held until cleared, All ship to paypal address. Appreciated for the prompt payment, Contact us if bid by mistake, system open unpaid item automatically.
Payment must be complete within 3 days from the date you purchase or after the end of auction. Items unpaid within 3 days of the auction end will be forfeited. We reserve the right of cancel the order and re-selling the items.
Shipping
Returns
1.If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact me before you return it.
2.Defective items Must Be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID.
3.Return shipping is to be paid by the Buyer.
4.We act as a responsible seller; we are willing to actively undertake the following responsibilities:
a. The item is lost during transit;
b. The item is damaged during transport;
c. Due to our work errors, transporting the wrong items to the buyer;
d. The item in the actual use of the process of quality problems.
Contact Us
Please leave five stars positive feedback positive comment and Five-Stars.
Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,
communication Please!
(NO) Three stars is LOW star, NO 1,2,3 stars PLEASE!
(YES) Please give us Five-star!
Have Question or Problem??
Step 1: Contact seller
Step 2: Describe your question clearly; we will give you the best solution
We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication!
1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.
2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.
Feedback
If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback.
We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you.
Starter for 07-2010 Chrysler 300 Dodge Charger 09-2010 Dodge Challenger 19025
Features:
1. Easy to operate
2. Produced by the sophisticated technology
3. It is the combination of elegance and good use, firmly and securely, guaranteeing the safety of your car
4. Made of high quality material, durable and reliable in use
5. Brand new and high quality
6. An important car part
Specifications：
Brand new
Fit and Quality Guaranteed
Easy installation
All of our starters are tested to ensure product performance and durability
Teeth: 10
KW: 1.2
Voltage: 12
Rotation: CW
Note: PMGR
Part Number：
ARROWHEAD: SMT0342
ARROWHEAD (OEM): M0T32671
For chrysler: 04801651AA, 4801651AA
J & N: 410-48137
LESTER: 19025
For mitsubishi: M0T32671, M0T32671ZC
WAI: 2-2987-MI
Fitment for：
MAKE
TYPE
MODEL
YEAR
ENGINE
For chrysler
Auto and Light Truck
300 SERIES
2007
3.5L(215) V6
For chrysler
Auto and Light Truck
300 SERIES
2008
2.7L(167) V6
For chrysler
Auto and Light Truck
300 SERIES
2008
3.5L(215) V6
For chrysler
Auto and Light Truck
300 SERIES
2009
2.7L(167) V6
For chrysler
Auto and Light Truck
300 SERIES
2009
3.5L(215) V6
For chrysler
Auto and Light Truck
300 SERIES
2010
2.7L(167) V6
For chrysler
Auto and Light Truck
300 SERIES
2010
3.5L(215) V6
For dodge
Auto and Light Truck
CHALLENGER
2009
3.5L(215) V6
For dodge
Auto and Light Truck
CHALLENGER
2010
3.5L(215) V6
For dodge
Auto and Light Truck
CHARGER
2007
3.5L(215) V6
For dodge
Auto and Light Truck
CHARGER
2008
2.7L(167) V6
For dodge
Auto and Light Truck
CHARGER
2008
3.5L(215) V6
For dodge
Auto and Light Truck
CHARGER
2009
2.7L(167) V6
For dodge
Auto and Light Truck
CHARGER
2009
3.5L(215) V6
For dodge
Auto and Light Truck
CHARGER
2010
2.7L(167) V6
For dodge
Auto and Light Truck
CHARGER
2010
3.5L(215) V6
For dodge
Auto and Light Truck
MAGNUM
2007
3.5L(215) V6
For dodge
Auto and Light Truck
MAGNUM
2008
2.7L(167) V6
For dodge
Auto and Light Truck
MAGNUM
2008
3.5L(215) V6
Package Includes:
1 x Starter
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery. You will not need to remove the positive cable on the battery. Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be. Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter. The smaller cylinder attached to the starter is the starter solenoid. A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid. In some cases, it may just be clips you need to disconnect for the wiring. On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter. Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one. Slide the starter into place. If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle. New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts. If the bolt does not thread properly, unscrew it and try again. Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid. With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery. With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle. If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it. As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery. A weak connection from the battery can prevent the engine from starting. Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad. If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery. If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out? You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this? A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to? He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like? In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter? No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item Specifics
库存SKU
ZC1STR045701
应用Promoted应用Listing
应用
Brand
KAC
Number of Teeth
10
Type
Starter Motor
Voltage
12
Power Rating
1.2
Features
Clockwise Rotation
OE/OEM Part Number
19025
Manufacturer Warranty
5 Years
Feature 1
Engineered to Meet or Exceed OEM Specifications
Feature 2
All Items Tested for Reliability and Performance
Fitment Type
Direct Replacement
Note 1
Please See Fitment / Application For Specific Details
Note 2
Manufactured with Highest Quality Components
Number of Pieces
1
Rotation
CW
Specifications / Fitment
1.2 Kw/12 Volt, CW, 10-Tooth Pinion
UPC
997750845855
Paypal only, eCheque will be held until cleared, All ship to paypal address. Appreciated for the prompt payment, Contact us if bid by mistake, system open unpaid item automatically.
Payment must be complete within 3 days from the date you purchase or after the end of auction. Items unpaid within 3 days of the auction end will be forfeited. We reserve the right of cancel the order and re-selling the items.
1.If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact me before you return it.
2.Defective items Must Be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID.
3.Return shipping is to be paid by the Buyer.
4.We act as a responsible seller; we are willing to actively undertake the following responsibilities:
a. The item is lost during transit;
b. The item is damaged during transport;
c. Due to our work errors, transporting the wrong items to the buyer;
d. The item in the actual use of the process of quality problems.
Please leave five stars positive feedback positive comment and Five-Stars.
Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,
communication Please!
(NO) Three stars is LOW star, NO 1,2,3 stars PLEASE!
(YES) Please give us Five-star!
Have Question or Problem??
Step 1: Contact seller
Step 2: Describe your question clearly; we will give you the best solution
We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication!
1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.
2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.
If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback.
We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you.
Three stars is LOW star, NO 1,2,3 stars PLEASE!
Please give us Five-star!