Pure Sine Wave Inverter Drive Board Circuit Board 12V 24V 36V 48V 60V

Interfaces:
- Switch Port: Connect to a small switch, enabling power-on or standby control
- Indicator: Connect LED to indicate standby or power on
- Fan Port: Connect to 12V cooling fan
- 220V Port: Connect AC voltmeter to detect inverter output voltage
- Feedback: Connect to the 220V terminal of a transformer, detect the output voltage and regulate the sampling effect

Jumper Settings of the Drive Board:


Note:
- Default Settings: JP5, JP2, JP7 and JP8 are short-circuited. And the corresponding functions are 50Hz, 3s soft start, and dead time 300nS. You can change the settings according to your needs.
- Jumpers with same functions cannot be short-circuited at the same time. For example, JP1 and JP5 must not be short-circuited at the same time. 

LED Alarm Indication:
Thanks to EGS002 driver board with LED alarm functions, you can judge fault types by LED. Definitions:
- Normal: Always on
- Over-current: Flashes twice and turns off for 2s. Repeat again and again.
- Over-voltage: Flashes three times and turns off for 2s. Repeat again and again.
- Under-voltage: Flashes four times and turns off for 2s. Repeat again and again.
- Over-temperature: Flashes five times and turns off for 2s. Repeat again and again.

Optional Types:
- 12V 1000W
- 24V 2000W
- 36V 2800W
- 48V 3600W
- 60V 4000W

Note:
- Please choose the type you want when purchasing. Thank you!
- Other items pictured are not included in the package. 

Package Included:
     1 x Inverter Driver Board