4WD Auto-Locking Hub Actuator Front Left and Right for Ford F150 Expedition H02
Items Description

Specifications:

  • Comes as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 7L1Z-3C247-A, 7L1Z3C247
  • Direct replacements
  • Built to strict quality control standards

 

Fits:

  • 2003-2015 Ford Expedition 4WD
  • 2015 Ford Expedition AWD
  • 2004-2015 Ford F-150 4WD
  • 2008-2012 Ford F-150 AWD
  • 2006-2008 Lincoln Mark LT 4WD
  • 2006-2014 Lincoln Mark LT AWD
  • 2003-2015 Lincoln Navigator 4WD
  • 2005-2015 Lincoln Navigator AWD 
 

Installation Instructions

  1. STEP 1: RAISE AND SECURE THE VEHICLE
    • Raise the vehicle with a jack
    • Secure the vehicle on jack stands
  2. STEP 2: REMOVING THE CV AXLE SHAFT
    • Remove the cap over the hub nut
    • Pry off the wheel center cap with a flat blade screwdriver
    • Remove the 13mm hub nut
    • While holding the tire in place, remove the six twelve-point 12mm bolts from the CV joint
    • Remove the 30mm bolt from the strut assembly using a breaker bar or ratchet and pipe
    • Tap the nut with a hammer to loosen it, if necessary
    • Pry the lower end of the strut assembly from the lower control arm with a pry bar
    • Pull out the CV shaft
  3. STEP 3: REMOVING THE FOUR WHEEL DRIVE ACTUATOR
    • Pry off the actuator with a flat blade screwdriver
    • Remove the three 8mm bolts from the four wheel drive actuator
    • Disconnect the vacuum hoses from the actuator
  4. STEP 4: INSTALLING THE NEW ACTUATOR
    • Put the actuator into place
    • Connect the vacuum hoses to the new actuator
    • Start the three 8mm bolts by hand
    • Tighten the three 8mm bolts
  5. STEP 5: REATTACHING THE CV AXLE
    • Reconnect the strut at the lower control arm
    • Slide the CV Axle back into place
    • Push the bolt through where the strut connects to the lower control arm
    • Attach the nut
    • Tighten the bolt to between 95-100 foot-pounds of torque
    • Start the 12-point 12mm bolts into the CV axle by hand
    • Tighten the bolts preliminarily
    • Tighten the bolts to 25 foot-pounds in a crossing or star pattern
    • Reinstall the 13mm nut on the end of the axle
    • Reinstall the cap over the nut
    • Reinstall the center cap
    • Lower the vehicle
Payment
PayPal Preferred, Credit or debit card through PayPal
Delivery Details
All Items will be shipped to buyer's Paypal confirmed Address.
We only ship to the confirmed address provided by PayPal. Please make sure your address in PayPal matches the shipping address. Please make sure your PayPal address is up-to-date.
All items will be shipped within 24 business hours upon receipt of payment (except Saturday and Sunday).
If you do not receive your item on time, please contact us immediately for further assistance. We will track the shipment and get back to you in 24-48h with a reply.
Terms of sales
Please leave us a good rating after you have received the item and are happy with our transaction. If there are any issues, please contact me first before leaving a neutral, negative or 5 star rating. Customer Satisfaction is our top priority!! We promise we can make you happy if you give us a fair chance. Thanks and happy bidding!
About us
Yusinauto is a leading company in the range of automotive parts , battery products , Door Handle, Window Switch, Hub bearing. we are an America company , Our Products are manufactured in TS16949 or ISO9001 certified facilities. We enjoy providing the highest quality, lowest price, best service on the market. We hope we can give you amazing shopping experience in our online store
Payment | Shipping | Return policy | About us
Copyright © 2020, yusinauto All Rights Reserved

DataCaciques