Front Wilwood Brake Kit

Aero6 Front (Race) Big Brake Kit


All new 6 Piston Forged Billet Aluminum Caliper with Stainless Steel Pistons


AERO6R/ST six piston radial mount race calipers are coupled with the high cooling capacity of 14.00" dynamically mounted Spec37 GT directional vane rotors to provide the ultimate brake package for unrestricted road race competition. AERO6R/ST calipers use a forged aluminum body and feature a Type III Mil-Spec, medium gray color hard anodized finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. 


This latest model of the AERO6R/ST calipers features a wider than standard body that accepts 20mm thick pads to add volume for longer service life. Thermlock pistons are used to reduce heat transfer from the pads to increase fade resistance, and extend service life with decreased temperatures in the caliper body, fluid, and seals.


 Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT series directional vane rotors are dynamically mounted to the OE hubs with weight saving forged aluminum hats. 


As is with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces. Mounting brackets, including all premium grade fasteners, secure the calipers to the uprights in the stock location with no modifications required. This championship proven system is completed with high temperature, high friction, race compound pads selected specifically by application. Installation requires the separate purchase of the stainless steel braided flexline kit that must be ordered according to the model year.

This kit ALSO includes approx $ 100 of

Stainless Braided DOT Compliant brake lines and fittings


BRAKE TECH ARTICLE  101 
 
"Why do I have LESS BRAKES when I INSTALL LARGER WHEELS ?"
 
Most Original Equipment Brakes create 3500 lbs of brake torque .
With stock diameter rims ( wheels ) you have perfect brakes for
freeway speeds. ( 65 - 70 mph )
 
Now install 17-19-20 -22 inch or larger rims and you NOW HAVE
35-40 MPH  brakes ... 
 
The REASON :
   
    REVERSE LEVERAGE FACTORS  !   The Larger diameter
    RIMS  reduce the TORQUE YOUR BRAKES CREATE  !  
   This is  DIRECTLY PROPORTIONAL to the diameter of your rims !
    RESULT ......................Brakes that now MAX OUT at 35-40 MPH
 
    In addition to REVERSE LEVERAGE we have weighed rims
    that easily DOUBLE the weight of your stock rims. You
    have now added 4 FLYWHEELS to further reduce brakes !
( extra weight - ENERTIA  ...weight IN MOTION requires MORE BRAKES !
 
SOLUTION ... Take off your STOCK 1 and 2 and 4  piston calipers
                        Take off your STOCK 10.5  11" and 12" rotors
 
INSTALL our RACE BRED CALIPERS that refuse to FLEX
                        BULGE or CLAMSHELL ( available in forged
                        designs that have up to 22,000 lbs of brake
                        torque !   TWO , FOUR and SIX PISTONS  !
 
INSTALL our RACE BRED ROTORS ...Depending on your
                        application we have 11, 11.5, 12,  12.5 12.88 ,
                        13" 14" 15" 15.5  and 16" diameter rotors with
                        MASSIVE fins  (internal) for cooling.
Many of our Rotors have DIRECTION FACING FINS 
 
 
END UP with Nascar Level brakes that can offer up to 200
                        MPH braking.
 
The most "heart-breaking comment" I hear from so many
of my Corvette owners when they UP-GRADE to Wilwood ...
With my stock brakes "If my son could have only stopped
3 feet sooner !"
 

********************

A word about your Seller ...

Davis Motorsports of Reno ( established 1958)  ..........Richard Davis Sr 

Richard Davis  is an avid Corvette Collector and Enthusiast ...

Richard ( now 77 ) still has his ORIGINAL C2- Rochester Fuel Injected Corvette 

along with several other Classic Corvettes

Recently ( at Hot August Nights ) Davis Motorsports demonstrated 

an installation of a BOLT ON WILWOOD CORVETTE KIT ...

Total time to INSTALL front or rear kits ....

1.5 HRS  start to finish !

The family business is Davis Motorsports of Reno , Nevada and GoRacin ( internet )  

Founded in 1958 Davis Motorsports has been selling Professional Racers 

Parts and race cars since 1958 ...

Selling Nationwide Nascar , Road Race and Open Wheel Teams Davis Motorsports sells

you the BEST PARTS ....the CORRECT PARTS for your car !

 



DEAR EBAY SHOPPER  ... We just revised many of our ads  ( WILWOOD and QA1 ) 
from 3 day handling time to 30 day handling times... This is 100%  due to the COVID
ISSUES for the past 12 months. 

MOST OFTEN we can ship in 1-3 days .... and we 
will WHENEVER POSSIBLE ... Notify us when your order is URGENT and we will do
our best for you ....WE WILL REFUND ANY ORDER that you ask for a REFUND.

 We
even have COMPETITORS ship your order for us when they have STOCK and our 7
warehouses have COVID  Quarantine issues . Davis Motorsports of Reno and GoRacin
Racers Emporium. have been in business since 1958. 
 

The HANDLING TIME is only when we have to USE  DIRECT SHIPMENT when no-one
else has your part numbers .The handling time will revise from week to week based on
current stock. We sell approx 200 Wilwood and QA1 kits per week and often the in stock
levels change from hour to hour...    THANK YOU ...you are our very valued customer