6.5HP 4-stroke Heavy Duty Outboard Motor Boat Engine w/Water Cooling CDI System
Cylinder Scoring Is a Serious Damage,Which Caused by Improper Use and Will Cost You a Lot of Money to Repair the Motor.
Don't Do the Following Will Avoid Cylinder Scoring:
1,Start the Motor on Bank
2, Use the Motor When It Stop Coming out of Water
Even If You Want Test the Motor, It Should Be Done in the River!
When There Is No Water Coming out from the Motor,Please Stop Using It Immediately ,Then Check the Impeller of Water Pump or Check If the Water Outlet Has Been Blocked.
About Certification:
We Can Only Provide Ce Certification, There Is No Other Certification Can Be Provided,Thanks for Your Understanding.
Note: When You Don't Use This Outboard Motor, Please Keep It Upright
The Hangkai 6.5 Hp 4-Stroke Provides All the Power You Need for Motoring in a Small Craft. This Engine Does That As Well As Providing Fuel Efficiency Second to None and a Newly Redesigned Carrying Handle and Holding Grip Make It Convenient to Transport! with All of This Available at a Competitive Price, It Is No Wonder This Little Outboard Receives so Much Attention and Praise!
Brand: Hangkai
Short Shaft: 40cm
Displacement: 123cc
Gear Ratio: 2.08(27:13)
Cylinder: 1
Max.speed(R/Min): 5000-6000
Gear Positions: F-n-r
Packing Size: 114x64x41cm
Ignition System: Cdi
Cooling System: Water-cooling
Control System: Tiller Control
Starting System: Manual Start
Control System: #93 Gasoline
N.w./G.w.(Kgs): 26/31.2
Bore X Stroke(Mm): 59x45
Recommended Propeller Range: 3 -7.8"X8"
Recommended Lubricant: Four Stroke Lubricating Oil
Mixing Ratio: Pure Gasoline
Trim and Tilt System: Manual Tilt
Overall Lxwxh(Cm): 78.3x34.3x103.9
Standard Fuel Tank Capacity: 12l
Bonus Accessories:
Brochures, Tubing, Cotter Pins
Pump Impeller, Start Rope, Start Key
12 Liter Fuel Tank, Tool Kit, Spark Plug, Cylinder Head Pad
Must Read Before Using!
Four Stroke 6.5 Hp:
Firstly, Fill the Gear Oil (Open Gear Box Lid and Fill It).
Secondly, Fill No. 92 Petrol, Lightly Press Oil Pump 6-10 Times.
Thirdly, Fill Engine Oil Don't Exceed the Head of the Pattern.
Forthly, Turn the Throttle to the Start up and Turn the Accelerator Gets up to 50%.
Then, Rapidly Pull the Starter Line.
After the Motor Start, Please Turn the Throttle to Running State.
Then, It Can Be Operated Now.
Note
Our machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself.
Note
Our machines are all without gear oil versions. Please add gear oil to the gears before using the motor and replace gear oil after the run-in period. (If you do not know how to handle this, please contact us). Our outboard motor doesn't with oil of gear, please prepare it by yourself.