How to Install :

Step 1: Before You Lift the Vehicle, Loosen Lug Nuts One Full Turn.

Step 2: Jack up Vehicle and Use Jack Stands for Safety & Remove the Tire from the Rotor.

Step 3: (Wheel Alignment Is Necessary After Strut Replacement.) Marking the Position of All the Bolts Will Help Keep the Alignment Close to Original and save Time.Aligning. Use a Colored Pencil to Mark the Old Strut on the Bolt.

Step 4: Use Penetrating Oil (Such As Wd40) to Coat Any Rusted Fasteners, Let Soak for Approximately 1 Hour.

Step 5: (Optional) While Waiting for Oil to Soak, Take This Time to Inspect All Other Components That May Need Replacement (Brake Pads, Rotors, Brake Hoses, Ball Joints, Cv Boots, Tie Rod Ends, Bushings, Sway Bars, Etc).

Step 6: Remove Any Brake Line or Wire Attachments from the Strut Body. Do Not Disconnect Brake Lines (If Possible)! Opening Brake Lines Will Require Bleeding of the Brake System.Use Extreme Caution When Removing Brake Lines from Your Struts, As Any Damage to Your Brake Line Can Result in Expensive and Time Consuming Repairs.

Step 7: Remove Sway bar Attached to the Strut Assembly or Control Arm.

Step 8: Remove the Tie Rod (Only If It Attached to the Body of the Strut, If Not Leave It Attached to the Steering Knuckle).

Step 9: Remove the Strut to Knuckle Bolts at the Bottom of the Strut. on some Vehicles, the Brake Caliper and Rotor May Need to Be Removed to Gain Access.

Step 10: Remove the Upper Mounting Plate Bolts Located in the Engine or Trunk Compartment. Do Not Remove the Center Retaining Nut! It Is Not Safe to Unload the Spring from the Assembly in This Position.

Step 11: Carefully Remove the Old Strut Assembly from the Vehicle. Be Very Cautious Not to Let the Strut "Drop" down on Your Brake Line, Rotor or Drum.

Step 12: Install the New Complete Strut Assembly in the Reverse Order As Above (Steps 11-6). Using an Anti-seize Compound on All Fasteners Is Suggested.

Step 13: Carefully Double Check Your Work and Make Sure Everything Is Tightened to Manufacturers Torque Specifications.

Step 14: Replace the Tire the Rotor and Tighten to Manufacturers Torque Specifications.

Step 15: Slowly Lower the Vehicle down After Removing the Jack Stands. Pay Very Close Attention to Any Odd Sounds When the Vehicle Is Lowered Onto the New Complete Strut Assemblies.

Step 16: It Is Very Important That You Immediately "Road Test" Your Vehicle Right Away to Ensure That Installation Was Done Properly. Listen and Feel for Common Signs of Incorrect Installation While Driving Slowly over Speed Bumps, Rough Road or Potholes.

Payment Shipping Return Policy Warranty Contact Us

1) we accepts all major credit cards via PayPal: MasterCard, Visa, American Express and Discover.

2) We will only ship to the confirmed PayPal shipping address given with the payment. Please make sure your PayPal and eBay address is correct. If not, please correct it before payment. Thank you.

3) If you want to ship to another address, please change your PayPal shipping address before you make payment.

4) To avoid initiating an unpaid item claim, please pay within 7 days.

5) Custom duties, taxes, or charges are not included in the cost you pay to us.

We only ship this item to United States !

1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number.

2. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days.

4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.

If you send us an e-mail, it will be answered within 48 hours during our working hours.

Please feel free to contact us if you have any questions:

Dear my friend,we appreciate your support.And our goal is service you well and give you a pleasant shopping time in our store.

✅Dear customer, when you want to return or exchange goods
(Please contact us first, instead of directly initiating a dispute)
1: Contact the seller first
2: Send pictures: outer packaging&scanned labels&item itself&with complete accessories, etc
necessary condition
Rule A: The original packaging of the item is in an unused state.
Rule B: The outer packaging must not have any damage.
3: Obtain return label
4: Delivered Projects - Payment Repayment

✅A 15% restocking and shelving fee will be charged for returns or exchanges that are not caused by the seller and are in good condition.
Exchange will not charge restocking fees or shipping fees due to transportation errors

✅Priority
In case of the following reasons, the freight will be borne by the buyer
1: Unexpected order
2: Find a better price
3: Change your mind
4: Buy more items/make mistakes/misread model information

✅Please note
Missing accessories/quality issues/transportation damage, etc
Please contact us first to obtain a good solution, rather than directly opening a return dispute.
Thank you very much for your understanding. I hope we have a pleasant cooperation!

About Warranty
✅ Free repair: During the warranty period, if the product fails due to manufacturing defects, component failure or workmanship problems, please contact us to provide corresponding handling methods.
✅ Warranty period: The warranty period is usually calculated from the date of purchase, and the specific period may vary depend on the product type and brand.
✅Extended warranty: Some manufacturers may provide additional extended warranty services, which usually require additional fees and may extend the original warranty period or provide a wider warranty coverage
✅ Warranty terms: The repairer needs to use components and spare parts that meet the technical requirements of the product, carefully record the failure and the quality of the product after repair, and ensure that the repaired product can be used normally for more than 30 days.
✅ Note: If there are any problems with the product received, please provide all relevant videos, pictures and other clues to facilitate our cunstomer service department and processing the issuse for you .
Thank you for your support

Contact us if you have any question, Give us a chance to serve you, negative

feedback could not solve anything, communication Please!

❎(NO) Three stars is LOW star, NO 1,2,3 stars PLEASE!

✅(YES) Please give us Five-star!

Have Question or Problem??

Step 1: Contact seller

Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message. NO others please!

Step 3: Describe your question clearly; we will give you the best solution

Please leave five stars positive feedback positive comment and Five-Stars.

* We maintain a high standard of excellence (5 star rating) and strive for 100% customer satisfaction!

* Feedback is very important to us.

* We would like you to contact us immediately before giving us neutral or negative feedback so that we can address your concerns to our satisfaction.

* If we don't understand these problems, we won't be able to solve them!

* After understanding the problem, we will be able to give you a satisfactory answer!

It's highly appreciated you leave us positive feedback and 5 star rating comments if you are satisfied with our service!

Your comment is very important in our business success.

For Honda 2008-2012 Accord Sedan V6 3.5L Front & Rear Strut & Spring Assembly Set

4pcs Front & Rear Strut Spring Assembly