OE Manufacturer: | |
Product Type: | Solenoid Switch |
Weight: | 1.0000 |
Condition: | NEW |
Unit Source: | |
Design / Type: | |
Design / Type: | |
Design / Type: | |
Starter Series: | |
Location - General: | |
Location - Specific: | |
Design Type: | |
Voltage: | 12 |
Amperage: | |
kW: | |
Rotation: | |
Regulator/Fan: | |
Tooth Count: | |
Spline Count: | |
Polarity: | |
Shaft Type: | |
Duty Cycle: | Intermittent Duty |
Horsepower: | |
RPM: | |
V-Set: | |
Circuit Type: | |
Plug Code: | |
Plug Orientation: | |
Pulley Class: | |
Case OD (mm): | 50 |
Overall Length (mm): | |
Gear OD (mm): | |
Pulley Belt Width (mm): | |
Pulley OD (mm): | |
Shaft Overall Length (mm): | |
Shaft OD (mm): | |
Clutch Type: | |
Operating Mode: | |
Pads Included: | |
Connection Type: | |
Piston Material: | |
Number of Pistons: | |
Piston Outside Diameter (in): | |
Piston Outside Diameter (mm): | |
Bleeder Port Measurement: | |
Inlet Port Measurement: | |
Ignition Type: | |
Housing Material: | |
Torque (ft. lbs): | |
Pulley OD (in): | |
Crankshaft OD (in): | |
Terminal Type: | |
Sensor Included: | |
Idle ACM Included: | |
Mounting Hardware Included: | No |
Mounting Type: | |
Mounting Type: | |
Mounting Type: | Hole |
Cap Design: | Bolt-On |
Plunger Type: | Non-Removable |
Includes: | |
Includes: | |
Number of Mounting Holes: | |
Number of Terminals: | 4 |
Number of Wires: | |
ETB Inside Diameter (in): | |
Unit Finish: | Same as OE |
Unit Color: | |
Number of Pieces: | 1 |
Country of Origin: | BR |
Country of Use: | |
Notes: | |
Other Part #: | SND6000, 245-52002, 245-52034 |
Customer Service Available 7 Days A Week
Kubota KC10 All (76-On) Z851BS Engine Denso System
Kubota KC15 1976-1982 All DH1102BS Engine Denso System
Kubota KC75 All (76-On) Z851BS Engine Denso System
Kubota L175F 1973-1976 All Kubota Z750A 17HP Dsl Denso System
Kubota L185 1977-1982 All Kubota Z751A 17HP Dsl Early Models
Kubota L185DT 1977-1982 All Kubota Z751A 17HP Dsl Early Models
Kubota L185F 1977-1982 All Kubota Z751A 17HP Dsl Early Models
Kubota L200 1972-1973 All Kubota Z1100 21HP Dsl Denso System
Kubota L210 1972-1973 All Kubota Z1100A 21HP Dsl Denso System
Kubota L225F 1973-1977 All Kubota D1100A 24HP Dsl Denso System
Kubota L235DT 1981-1985 All Kubota D1102A 23.5HP Dsl Direct Drive
Kubota L245 1977-1982 All Kubota DH1101A 25HP Dsl Direct Drive
Kubota NSU18 All (74-On) DH1101BS Engine Denso System
Kubota NX2200 All (74-On) Denso System
Kubota Various All (72-On) D1100 Engine Denso System
Kubota Various 1972-1983 All Z750 / Z751 Engines Denso System
Toyota Celica 1971 L4 1.9L 1898cc w/R Terminal on Solenoid
Toyota Celica 1972-1974 L4 2.0L 1968cc 120cid w/R Terminal on Solenoid
Toyota Celica 1975-1980 L4 2.2L 2189cc DD Starter, w/R Terminal
Toyota Corolla 1969-1979 L4 1.2L 1166cc 71cid
Toyota Corona 1972-1974 L4 2.0L 1968cc 120cid DD Starter, w/R Terminal
Toyota Corona 1975-1980 L4 2.2L 2189cc DD Starter, w/R Terminal
Toyota Pickup 1972-1974 L4 2.0L 1968cc 120cid w/R Terminal on Solenoid
Toyota Pickup 1975-1980 L4 2.2L 2189cc DD Starter, w/R Terminal
Universal 5416 1976-1982 All 2cyl 16HP Diesel Kubota Z-751 Engine
Universal M-20 1982-1983 All 2cyl 16HP Diesel Kubota Z-751 Engine
*NOTE: "M.T" Indicates Manual Transmission / "A.T" Indicates Automatic Transmission*
Please Reach Out To Customer Service To Confirm Fitment, If Necessary.
Daihatsu Motor Co: 28150-36050-000
Kubota: 15321-63021
Toyota: 28150-12031, 28150-24060, 28150-26030, 28150-36051, 28150-41020
Denso: 053400-1740, 053400-1870, 053400-1880, 053400-2120, 053400-2250, 053400-3000
Arrowhead: SND6000
J & N Automotive: 245-52002, 245-52034
WE STRIVE TO PROVIDE A 5 STAR EXPERIENCE!
Our objective is 100% customer satisfaction. If we did not fulfill your expectations please contact us using eBay messager.
All of our products are covered by a one year warranty from the date of purchase.
We offer warranty for products that have a manufacturing defect due to materials or workmanship. The warranty does not cover failure due to abuse, misuse, improper installation or modifications. We are not liable for the cost of installation, removal or any other expenses beyond the original purchase price of the item.
It is the responsibility of the customer to verify the correct application information prior to purchasing any product from our eBay store. All purchases made in error may be returned within 30 days from the date of purchase and are subject to a 20% restocking fee. The product must be returned in its original condition including the packaging.
Free shipping on purchases shipped to all 50 states.
We offer international shipping through eBay global shipping program.
We process and ship orders within one business day of the order information being received. With the exemption of U. S. holidays.
Expedited orders including next day, second day and third day delivery methods are processed and shipped the same business day if checkout is completed by 5pm Eastern Time.
We reserve the right to change shipping carrier and shipping method for efficient and on-time deliveries. OEG Parts is not responsible for carrier delays such as weather or natural disasters.
All returns must be approved with a Return Material Authorization Number (RMA #) that must be included with the return
To receive an RMA Please contact OEG Parts Customer Service.
All returned products will be inspected. Returns processing may take up to 3 business days from the time your product is received at our return facility locations.
Immediate payment is required during checkout. We will process and ship orders once checkout is completed.
Often, Customers reach out to us to help confirm fitment of parts prior to purchase.
We always recommend cross referencing a part number to ensure fitment as well.
You may Contact Us by locating the "Contact Seller" Button within a listing.
After making a purchase, the phone number will be visible to you through eBay when you click on "Contact Seller".
You can also find our phone number by clicking on FAQs > Other
It is against eBay Policy to provide you our contact information any other way.
categories