Enhance your vessel's performance with the PropGlide PCK-625 Medium 625ML Kit, a foul-release coating system designed to keep your propeller and running gear free from marine growth. This efficient coating improves fuel efficiency, reduces drag, and boosts vessel speed, making it an essential addition for any serious boater. Cost-Effective Performance: Provides high performance at a lower cost compared to competitive brands, offering great value for your investment. Increased Prop Speed: Minimizes drag and prevents fouling, resulting in higher RPMs and faster vessel speeds. Improved Fuel Efficiency: Clean propellers and running gear lead to better engine efficiency, reduced fuel consumption, and cost savings. Specifications PropGlide Etching Primer Physical Properties Mixing Ratio: Primer Base (Part 1) : Primer Hardener (Part 2) = 4 : 1 by volume Color: Primer Base (Part 1)Yellow Primer Hardener (Part 2) : Clear Dry Film Thickness: 8 microns Drying Time: 5-15 minutes touch dry (temperature dependent)- 1 hour hard dry @ 20�C/68�F Painting Interval: Apply PropGlide� Clear TopCoat when Etching Primer is just touch dry Pot Life: 8 hrs @ 20�C/68�F PropGlide Clear Top Coat Physical Properties Binder type: Silicone Polymer Solvent: Xylene Color: Clear coating Finish: Glossy Dry time: 45 minutes touch dry ; 8 hours hard dry @ 20�C Recommended film build: 75 microns per coat Thinning: N/A Clean up: Acetone Shelf life: Unopened: 3 years+. Once opened: 12 Hours