Cummins Marine Engine Boat Instrument Panel
Pre wired USA Made
Product Description
Panel Material: marine Acrylic, poly carbonate , marine Plexiglas
Dimensions: 11.75" X 5.375" X 9.625"
Black Panel With White Gauges
Fog resistant Marine Grade Gauges:
- 4000 RPM Programmable Tachometer with Digital Hour Meter 7 Character LCD Display (Alternator , magnetic , signal generator Pick Up Available, please specify).
- Engine Coolant Water Temp Gauge 100-240°F/ 40-110°C
- Engine Oil Pressure Gauge 0-80 psi/0-500 kPa
- 12 V Voltmeter Gauge (24 Volt available)
- Fuel Level Gauge E-F 240-33 ohms
Kit Includes:
- Fully Wired Instrument Panel with 5 Marine Grade Gauges
- Cole Hersee Sealed Ignition Key Switch
Features and Benefits of Cole Hersee Sealed Ignition Key Switch:
- Engineering thermoplastic construction
- Fully sealed contact area using O-rings and ultrasonic welding
- Integrated Sealed Deutsch Connector Interface
- Anti-restart and spring return options available
- Tested to SAE J259 for ignition switches
- Supplied with two matching keys, with or without boot
- Custom logo can be molded on the boot
- Multiple key codes or keyed alike available
- Key is removable only at the ‘Off’ position
An extensive series of ignition switches that can also be used as rotary switches. Suitable for a broad range of voltages: 10A at 12V, 5A at 24V, 3A at 36V and 2A at 48V DC. Made of rugged engineering grade plastic, these switches stand up to mechanical shock and vibration, and will not corrode or rust. This switch has an integrated Deutsch-type socket to make electrical connection quick and easy, and to exclude moisture and dust. UL-tested and recognized to SAE J259 for ignition switches. Contacts are sealed front and back to IP67 (with connector installed). Many options available with regard to position, spring return, key boot style and marking, actuator interface and length, and anti-restart features.
Marine Grade Wire & Features:
- USCG / NMEA specification Copper tinned wire
- flexible cable water and oil resistant
- 10″ to 12″ Pigtail Harness connected to 12 position terminal strip
12 Circuit 30 Amp Terminal Strip
Features
- Closed back design completely insulates power from the mounting surface
- Each screw pair is one isolated circuit
- Jumpers allow creation of common circuits
Additional Features:
- Marine grade push button switch (Engine Stop, or Pre-heat, or both if need it)
- Senders and Accessories not Included
- Engraved with Engine Name (optional your boat Name)
- Low oil & Hi Temp LED warning indicator
#Note Always you can choose between
- Black and White Panel .
- Black And White Gauges.
- 24V System Available (optional )
- Also you can Custom your panel size ,gauges, design and switches , just contact us (extra charge applicable )
Please specify your requirement
If you have any technical question please feel free to call or email us.All panels are made in the USA by AC DC Marine Inc. Torrance, California
Shipping
All orders are shipped from our Los Angeles Location.
The Shipping and processing time depend on the items customer is ordering. Shipping time are usually within 3-5 business days from the purchase date, except for peak seasons and holidays.
If customer is ordering multiply pieces and the status and shipping date of each are different, the order may be split in two or it may ship on the latest date.
All shipping fees are charged based on the subtotal before taxes and discounts on the checkout page.
We are shipping worldwide. If you have any questions about shipping, feel free to contact us!
Returns
We accept returns withing 30 days of your receipt of the order merchandise. Item(s) must be in original unused condition, and all tags, cards, boxes, and/or pouches must be included with your return. If customers fail to send their returns in 30 days from shipped date, their return request will be voided. All returned shipping fees must be paid by buyer. No refund will be made for damaged parts. Shipping, handing, and insurance fees are NOT refundable.
Panel Material: marine Acrylic, poly carbonate , marine Plexiglas
Dimensions: 11.75" X 5.375" X 9.625"
Black Panel With White Gauges
Fog resistant Marine Grade Gauges:
- 4000 RPM Programmable Tachometer with Digital Hour Meter 7 Character LCD Display (Alternator , magnetic , signal generator Pick Up Available, please specify).
- Engine Coolant Water Temp Gauge 100-240°F/ 40-110°C
- Engine Oil Pressure Gauge 0-80 psi/0-500 kPa
- 12 V Voltmeter Gauge (24 Volt available)
- Fuel Level Gauge E-F 240-33 ohms
Kit Includes:
- Fully Wired Instrument Panel with 5 Marine Grade Gauges
- Cole Hersee Sealed Ignition Key Switch
- Engineering thermoplastic construction
- Fully sealed contact area using O-rings and ultrasonic welding
- Integrated Sealed Deutsch Connector Interface
- Anti-restart and spring return options available
- Tested to SAE J259 for ignition switches
- Supplied with two matching keys, with or without boot
- Custom logo can be molded on the boot
- Multiple key codes or keyed alike available
- Key is removable only at the ‘Off’ position
An extensive series of ignition switches that can also be used as rotary switches. Suitable for a broad range of voltages: 10A at 12V, 5A at 24V, 3A at 36V and 2A at 48V DC. Made of rugged engineering grade plastic, these switches stand up to mechanical shock and vibration, and will not corrode or rust. This switch has an integrated Deutsch-type socket to make electrical connection quick and easy, and to exclude moisture and dust. UL-tested and recognized to SAE J259 for ignition switches. Contacts are sealed front and back to IP67 (with connector installed). Many options available with regard to position, spring return, key boot style and marking, actuator interface and length, and anti-restart features.
Marine Grade Wire & Features:
- USCG / NMEA specification Copper tinned wire
- flexible cable water and oil resistant
- 10″ to 12″ Pigtail Harness connected to 12 position terminal strip
12 Circuit 30 Amp Terminal Strip
Features
- Closed back design completely insulates power from the mounting surface
- Each screw pair is one isolated circuit
- Jumpers allow creation of common circuits
Additional Features:
- Marine grade push button switch (Engine Stop, or Pre-heat, or both if need it)
- Senders and Accessories not Included
- Engraved with Engine Name (optional your boat Name)
- Low oil & Hi Temp LED warning indicator
#Note Always you can choose between
- Black and White Panel .
- Black And White Gauges.
- 24V System Available (optional )
- Also you can Custom your panel size ,gauges, design and switches , just contact us (extra charge applicable )
All panels are made in the USA by AC DC Marine Inc. Torrance, California
Shipping
All orders are shipped from our Los Angeles Location.
The Shipping and processing time depend on the items customer is ordering. Shipping time are usually within 3-5 business days from the purchase date, except for peak seasons and holidays.
If customer is ordering multiply pieces and the status and shipping date of each are different, the order may be split in two or it may ship on the latest date.
All shipping fees are charged based on the subtotal before taxes and discounts on the checkout page.
We are shipping worldwide. If you have any questions about shipping, feel free to contact us!
Returns
We accept returns withing 30 days of your receipt of the order merchandise. Item(s) must be in original unused condition, and all tags, cards, boxes, and/or pouches must be included with your return. If customers fail to send their returns in 30 days from shipped date, their return request will be voided. All returned shipping fees must be paid by buyer. No refund will be made for damaged parts. Shipping, handing, and insurance fees are NOT refundable.
Please allow up to 15 business days for your exchange or return to be processed. Business days are Monday-Friday with the exception of federal holidays. Return processing begins after customer’s package is delivered to us. For any inquires concerning returns or exchanges, please contact Customer service. AC DC Marine Inc. will not accept returns if customer doesn’t email us and receive a return conformation number.
Please allow up to 15 business days for your exchange or return to be processed. Business days are Monday-Friday with the exception of federal holidays. Return processing begins after customer’s package is delivered to us. For any inquires concerning returns or exchanges, please contact Customer service. AC DC Marine Inc. will not accept returns if customer doesn’t email us and receive a return conformation number.