- IQ high speed motor magnet for club car golf cart;

- Fits Club Car DS & Club Car Precedent 48V IQ Models with ADC Motor;

- Increase your IQ golf carts speed without a loss in torque, without replacing your gears, or any motor/controller upgrades.Most can expect to see 2-8 MPH gain depending on the health of your batteries;

- Flip your tow/run switch before installation;

- Simply jack up the rear of your cart, remove your passenger side tire, remove screws holding speed sensor to motor, replace magnet in motor, and re-install!

If you have questions regarding if your Club Car has a IQ system with ADC motor or a GE motor . The easiest way to tell is by checking the serial number prefix. If your serial numbers starts with: AQ, CE, FD, HD, PE, or PQ then you have a cart with a IQ system. You can also look at the motor controller part number. If your model number starts with "1510" then you also have an IQ system.

Installation Instructions:

1: Flip the Tow/Run Switch to the TOW position (this should be done whenever you are servicing the cart)

2: Disconnect main positive and negative battery cables to your cart

3: Remove the ADC speed sensor from the end of your cart motor

4: Now you can gain access to the magnet. Simple remove the magnet by using a small flat head screwdriver or socket

5: Install the new magnet in the same position you just remove the old magnet from

6: No just re-install the speed sensor, re-attach the battery cables, and run the Tow/Run switch back to the RUN position.