ky-motors

Focusing on motor parts

Upgrade 1/2-Inch Marine Stainless Steel Quick Release Fender Kit Mount Holder Kit

Product Features:

【Sturdy & Durable】 The heavy-duty fender receiver is made of high quality 316 stainless steel material to ensure the corrosion resistance and long lasting use. A great choice for both fresh and saltwater vessels.
【Anti-scratch Design】 Hand-polished, passivated and soft-edged receiver, protecting it from wear and scratch. Suitable for installing in hard-to-reach areas. A Fantastic addition to your boat.
【One-hand Operation】 The boat fender receiver works with fender cleat (Not included). One quick-release button of the cleat allows you to quickly and effortlessly dock and undock with single hand. Simply click the button, drop the pin into the receiver and you’re ready to go. The cleat would attach the fender tightly to your boat. No worry about knot tying and excess rope again. Indispensable accessory on your boat.
【Warm Tips】
(1) Hole diameter: ⌀ 1/2" Receiver = ⌀ 1" Hole; ⌀ 3/8" Receiver = ⌀ 3/4" Hole;
(2) It's recommended for use on fiberglass hulls.
(3) The 1/2 inch receiver is used with the 1/2 inch holder.
(4) For your better installation experience, other tools are recommended for the installation process. Please kindly check the recommended installation tool and process in the product detail page.

Product Specification

Material: 316 Stainless Steel
Special Feature: One quick-release button for easy dock and undock with single hand

Installation Tips:

Before installing the receiver, please using the Locator Disk and mark dead center of the receiver with a pencil.
Be sure to check that there are no structural members, cables, etc. behind the drilled holes.
Always finish drilling from the outside. This will minimize the risk of damaging the gelcoat.
Hole diameter: ⌀ 1/2" Receiver = ⌀ 1" Hole; ⌀ 3/8" Receiver = ⌀ 3/4" Hole

Installing the Receiver

Clean inside and outside surfaces.
Screw install tool into the brass nut plate.
Remove protective film from adhesive tape.
Pivot nut plate, insert in hole, pivot back and pull several times to adhere tape on back side of fiberglass.
Unscrew install tool.
Apply marine grade silicone to underside of receiver head.
Apply Loctite to receiver threads, screw into brass nut plate and tighten with Allen wrench.

Item Specifics
Brand	KY-auto
Number of Pieces	3
Warranty	1 Year
Type	Fender
Material	Stainless Steel
Color	Silver
Fitment	Fit 1/2 inch Receiver

Payment

★. Buyers are welcome to use the following payment methods: payoneer, paypal, credit card, debit cardand many other mothods.

Shipping

★. After your payment is completed, the item will be shipped from the US warehouse within 1-2 business days.

★. We only ship to confirmed ebay addresses. Your ebay address MUST MATCH your Shipping address

Returns

★.We accept 60 days return guarantee for all Items. If you are unsatisfied with the item, you may send it back within 60 days of receipt, and then you will receive refund.

★.For returns caused by product quality issues, we will bear the cost of the return. For returns for other reasons, return costs may need to be borne by the buyer.

★.All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns.

★.It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.

★.Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return.

★. We will reply your message within 24 hours Mon-Sat, and 48 hours on Sunday.

Feedback

★.Welcome to leave your positive feedback, it will help other customers have a better shopping experience.

★.Please contact me before leaving neutral or negative feedback. Our customer service representative will do our best to solve the problem for you, thank you!