Mercury-Mercruiser 35-866340K01 Oil Filter

This OEM oil filter is constructed with a high-efficiency design that allows for the constant flow of oil to vital engine areas. The unique filtration system screens particles smaller than 1/1000th of an inch from your oil keeping it cleaner longer.

It is recommended that you change your fuel filter after every 100 hours of normal use or minimally once per season.

Fits all MCM/MIE GM engines, except V-6 models that have the oil filter mounted on the engine block

Mercruiser In-Line 4- & 6- Cylinder Engines

Mercruiser GM V8 Engines

Mercruiser V6 & V8 Engines w/ Remote Oil Filter

Fits 4.5L and 6.2L Mercury engine

Interchangeable:

Sierra

18-7824-2

18-7876-1

Mercury Oil Filter Installation Instructions

Unscrew old filter and clean mounting base. Be sure old gasket is removed from mounting base

Apply a thin coat of oil to filter gasket. Make sure the gasket is seated properly in base of the filter

Screw on until the gasket contacts the base. Tighten 1 - 1-1/4 turn

Use an acceptable filter wrench if necessary. Do NOT exceed 1 - 1-1/4 turn

Refill crank case and run the engine while checking for leaks

Check oil level

Mercury Oil Filter Installation Instructions

Unscrew old filter and clean mounting base. Be sure old gasket is removed from mounting base

Apply a thin coat of oil to filter gasket. Make sure the gasket is seated properly in base of the filter

Screw on until the gasket contacts the base. Tighten 1 - 1-1/4 turn

Use an acceptable filter wrench if necessary. Do NOT exceed 1 - 1-1/4 turn

Refill crank case and run the engine while checking for leaks

Check oil level