Installation

· Decals shall be applied to dry and clean surfaces, will stick to most surfaces including vehicle bodies, windshields, and hard plastic. Do not install the sticker in extreme heat or cold.

· Lift the sticker up and peel the white paper backing off the sticker. Be careful not to pull the masking tape off. Keep ahold of the bottom of the sticker to keep it from sticking to itself or the surface before you want it to. Be careful that once applied, the sticker cannot be removed without damaging.

· Slowly lower the sticker and rub it in place with a credit card or similar item. Start at the top middle and then the outer edges. Firmly rub the sticker in place to make sure there is no air bubbles trapped under the sticker.

· Slowly peel the pre-mask cover off at an angle. Be very careful not to pull the sticker off the surface.