• description
    •

    AC Condenser With Receiver Drier For 2006-2011 Honda Civic DX LX Sedan HO3030140

    Automobile condenser function:
    1. The automobile condenser is usually installed in the front of the automobile (in front of the radiator) and cooled by the fan (the condenser fan is shared with the radiator fan, and some models use a special condenser fan);
    2. The function of the condenser is to change the high-temperature and high-pressure gaseous refrigerant sent by the compressor into liquid refrigerant, and the refrigerant changes its state due to heat dissipation in the condenser;
    3. Therefore, the condenser is a heat exchanger that radiates the heat absorbed by the refrigerant in the vehicle to the atmosphere through the condenser.

     

    Item Features:

    • The air-conditioning condenser is located between the car's grille and the engine-cooling radiator in which the gaseous refrigerant sheds heat and returns to a liquid state. The liquid refrigerant flows to the evaporator inside the dashboard, where it cools the cabin. 
    • The condenser works as a car radiator by dissipating out heat but also cooling the high-pressure refrigerant gas so it forms into a high-pressure liquid, then gets streamed to the receiver-dryer until it continues to the expansion valve.

     

    Symptoms of a Bad A/C Condenser:

    • Noticeable Coolant Leaks
    • Lukewarm Air From Vents
    • Overheating While Idling
    • Burning Smell
    • Warning Lights On

     

    Applications:

    For 2006-2011 Honda Civic DX LX Sedan

     

    Package Included:
    1 * A/C Condenser  (including dryer)  (As Shown)


    How to Replace A/C Condenser:

    • Step 1: Discharging and recovering the AC refrigerant.
    • Step 2: Condenser removal and replacement.
    • Step 3: Remove parts that are in the way of the condenser.
    • Step 4: Take off the A/C lines that run to the condenser.
    • Step 5: Take off the condenser.
    • Step 6: Install a new condenser.
    • Step 7: Install the A/C lines and replace the o-rings.

    ​

    Warm Tips:

    Please ensure this item will fit your vehicle by checking the photos or the part number.
    If you have any questions, feel free to contact us, and we will reply you as soon as possible.

     

    Features:

     

    -Aluminum construction to ensure heat transfer efficiency

    -Louvered aluminum fins and tubes are bonded through a unique furnace-brazing process with premium quality aluminum for maximum heat dissipation

    -Each product is quality inspected and 100% tested

    -Lightweight Direct Bolt-On OEM Fitment or Replacement

    -Guaranteed Exact Fit for easy installation

     

    Know about the AC Condenser:

     

    AC Condenser: The condenser is part of the A/C system. It receives the hot, high-pressure gaseous refrigerant from the compressor and cools it to a warm liquid state, although still under high pressure.

     

    Location: The Condenser is located right in front of the radiator. High pressure (hot) refrigerant travels through it and cools off as air passes through. Most late-model condensers cannot be flushed due to multiple flow paths, and must be replaced if restricted.

     

    Check: If testing proves that your condenser is leaking, restricted, or otherwise damaged, don’t pay the high dealer price for a replacement, when you can get an OE quality condenser for much less from Replace.


    Item Specifics
    UPC 997750788084
    Brand KAC
    Manufacturer Part Number AA788084
    Manufacturer Warranty Lifetime
    OE/OEM Part Number 80110SNAA02
    Interchange Part Number HO3030140
    Superseded Part Number 80110SNAA01
    Type A/C Condenser
    Placement on Vehicle Front
    Vintage Part No
    Universal Fitment No
    Color Silver
    Material Aluminum
    Mounting Style Bolt-On
    Inlet Fitting Type Block
    Outlet Fitting Type Block
    Items Included 1 * AC Condenser
    Fitment Type Direct Replacement
    Features 100% Leak Tested
    MPN AA788084
    oe 80110SNAA02，HO3030140
    Features 1 ✈️ DURABLE & BRAND NEW
    Features 2 ✈️ LIFETIME WARRANTY
    Features 3 ✈️ US WAREHOUSE
    Features 4 ✈️ FAST & FREE SHIPPING

    ABOUT KAC
    Dedicated to building the most competitive auto lighting brand, KAC has built an expert technical team to work out the higher performance LED lighting solutions and established a long-term partnership with many high-quality suppliers in the industry who can provide us with quality parts and chips all at an extremely competitive price through the long-lasting efforts.
     
    All the cooperated suppliers are selected strictly by the expert and experienced team of KAC.
     
    Adhering to the brand principle ---The high-quality material creates excellent products
     
    brand slogan---Light Up You More
    KAC has committed to do our utmost to serve more vehicles models with the most competitive products both in price and service, including headlights, foglights, headlight assembly, etc., aiming at the largest group of customers. Paired with our
    innovative technologies, fast shipping and satisfaction guarantee, we’re able to ensure that all the customers can get the product when they need it.
    PAYMENT
    1) KAC accepts all major credit cards via PayPal,MasterCard, Visa, American Express and Discover.
    2) We will only ship to the confirmed PayPal shipping address given with the payment.
    3) If you want to ship to aother address, please change your PayPal shipping address before you make payment.
    4) To avoid initiating an unpaid item claim, please pay within 7 days.
    WARRANTY
    1) KAC offers 5 years warranty and a 60 days free return.
     
    Disclaimer: KAC provides a 60-Day easy return satisfaction guarantee. Items to be returned must be in original factory condition.
     
    2) We offer a free return & money-back guarantee. If you are not satisfied with the product for any reason, you can return the item for refund or replacement/exchange. All returns must include the original packaging. (Please refer to our return policy for details.)
    If you have any questions, please contact us via eBay message.
     
    3) Any items damaged because of incorrect installation will not be refunded. 
    4) Unauthorized reselling of KAC products is strictly prohibited and we can't honor the warranty if purchasing from an unauthorized reseller.
     
    SHIPPING
    1) We will ship items locally for US buyers. Usually, for US buyers it will take about 5-7 business days to reach. If you don't get it, please contact us firstly, we'll try our best to support you.
    2) For US customers, all items will be shipped out within 1-2 business days with cleared payment. Please include your phone number in the payment note for prompt and secure shipment.
    3) Tracking numbers for all orders are added to eBay once they have been dispatched; please log in to eBay to find the tracking information for your order.
    ABOUT US
    If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/writing a review or filing a return case. We will solve the problem!
    We always put our customers first and your satisfaction is guaranteed.
    Our KAC Tech are here to serve you. Email us and our expert team will swiftly diagnose the issue and offer the best solution within 12-24 business hours. All off-hours emails will be answered within 24-48 hours.

    Shop Category
     Store Home
     Other
    Hot Item
    Excellent Delivery

    content_src_url

    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    New List Item

    Pair Front Complete Strut Spring Assembly fit 2004 2005 2006 Scion xA xB FWD New

    11

    1

    Introductions:

    Absorber is mainly used to suppress the shock and impact from the road after suction rebound. This Iron Shock Absorber is doing well in this field. In the most of car suspension system with shock absorbers, to accelerate the frame and body vibration attenuation, and improve the riding comfort of cars. It can also protect you safety from injured. The quality of it is very good, so you don't worry about to change it. Why not take a try for it?

     

    Features:

    1. It is made of iron material that does not contain any ordinary rubber

    2. Endure high and low temperature, large temperature difference, high vacuum, strong radiation and corrosive environment.

    3. High bearing capacity and the resistance to fatigue, aging, service life and long storage time.

    4. Its performance index is can be designed

    5. Can meet the damping, vibration, sealing, filter, throttle and acoustic noise reduction requirements

     

    FEATURES:

    • Ready To Install: The KAX complete struts assembly includes all the components required for a strut replacement in a single. No Spring Compressor Required! Save you 70% of installation time 
    • Recover 100% Performance: Worn out struts add 20% to the vehicle’s stopping distance. after replacing KAX struts assembly, shorten the braking distance, and increase the safety distance. Improve steering response, reduce stopping distance and give you more confidence in driving 
    • Increase Tire Grip: By increasing the spring stiffness coefficient, the rapid vibration of the wheel is suppressed, the tire is prevented from leaving the road, and the exercise stability is improved 
    • Bounce Reduction: Damping rods reduce body vibration and bounce by generating resistance through the flow of fluid to absorb or slow down the direct impact of energy​
    •  

    Feature:
    Brand New
    Stock parts direct replacement
    Easy installation
    Surface Finish: Black

    Part Number:  172245  172245*2

     

    Fitment For:

    • SCION XA 2004 - 2006
    • SCION XB 2004 - 2006

     

    Package Includes:

    (As shown in the figure)

     

    KAX complete struts assembly Features:

     

    Upper Strut Mount: Superior premium-style bearings.SAE-grade nuts and bolts.Superior rubber-to-steel bonding.All components manufactured to meet Superior performance.


    Hollow Bumper: The premium bumper prevents component damage when the suspension bottoms out.


    Coil Spring: Manufactured with high-quality steel, each coil spring is precisely calibrated to support the vehicle's weight and help ensure correct ride height. 


    Upper Spring Seat: The upper spring seat provides consistent performance without transmitting noise or vibration into the chassis. Also supports the vehicle's weight and helps properly offset the spring in the strut tower.


    Strut Dust Boot: The durable strut boot protects the strut rod and seal from dirt and debris.


    Lower Spring Isolators: Prevents metal to metal contact and helps eliminate noise between the spring and spring seat.


    NEW Premium Strut: Premium strut technology based on application For . Each strut features application For-engineered valving to complement each vehicle's unique ride and handling characteristics.

     

    How to Install:

     

    Step 1: Before You Lift the Vehicle, Loosen Lug Nuts One Full Turn.

    Step 2: Jack up Vehicle and Use Jack Stands for Safety & Remove the Tire from the Rotor.

    Step 3: (Wheel Alignment Is Necessary After Strut Replacement.) Marking the Position of All the Bolts Will Help Keep the Alignment Close to Original and save Time Aligning. Use a Colored Pencil to Mark the Old Strut on the Bolt.

    Step 4: Use Penetrating Oil (Such As Wd40) to Coat Any Rusted Fasteners, Let Soak for Approximately 1 Hour.

    Step 5: (Optional) While Waiting for Oil to Soak, Take This Time to Inspect All Other Components That May Need Replacement (Brake Pads, Rotors, Brake Hoses, Ball Joints, Cv Boots, Tie Rod Ends, Bushings, Sway Bars, Etc).

    Step 6: Remove Any Brake Line or Wire Attachments from the Strut Body. Do Not Disconnect Brake Lines (If Possible)! Opening Brake Lines Will Require Bleeding of the Brake System.
    Use Extreme Caution When Removing Brake Lines from Your Struts, As Any Damage to Your Brake Line Can Result in Expensive and Time Consuming Repairs.

    Step 7: Remove Sway bar Attached to the Strut Assembly or Control Arm.

    Step 8: Remove the Tie Rod (Only If It Attached to the Body of the Strut, If Not Leave It Attached to the Steering Knuckle).

    Step 9: Remove the Strut to Knuckle Bolts at the Bottom of the Strut. on some Vehicles, the Brake Caliper and Rotor May Need to Be Removed to Gain Access.

    Step 10: Remove the Upper Mounting Plate Bolts Located in the Engine or Trunk Compartment. Do Not Remove the Center Retaining Nut! It Is Not Safe to Unload the Spring from the Assembly in This Position.

    Step 11: Carefully Remove the Old Strut Assembly from the Vehicle. Be Very Cautious Not to Let the Strut "Drop" down on Your Brake Line, Rotor or Drum.

    Step 12: Install the New Complete Strut Assembly in the Reverse Order As Above (Steps 11-6). Using an Anti-seize Compound on All Fasteners Is Suggested.

    Step 13: Carefully Double Check Your Work and Make Sure Everything Is Tightened to Manufacturers Torque Specifications.

    Step 14: Replace the Tire the Rotor and Tighten to Manufacturers Torque Specifications.

    Step 15: Slowly Lower the Vehicle down After Removing the Jack Stands. Pay Very Close Attention to Any Odd Sounds When the Vehicle Is Lowered Onto the New Complete Strut Assemblies.

    Step 16: It Is Very Important That You Immediately "Road Test" Your Vehicle Right Away to Ensure That Installation Was Done Properly. Listen and Feel for Common Signs of Incorrect Installation While Driving Slowly over Speed Bumps, Rough Road or Potholes.

     

    Fault inspection of shock absorber :


    When the car is on a bumpy road,the shock absorber will make a "click" or "creak" sound when it is bumpy. When the car is running at a slow speed and the emergency brake is applied, if teh car vibrates violently and the shock absorber leaks oil, it indicates that the shock absorber is broken and needs to be replaced.

     

        1、Check the appearance of the shock absorber for signs of oil leakage.You can press the four corners of the car by hand to check whether the car body bounce has abnormal sound.

     

        2、Stop the car after driving 10 km on the road with poor conditions, and touch the shock absorber shell by hand. If the shell is hot, it means that the shock absorber is short of oil, otherwise it means that shock absorber is broken.

     

        3、Stand at the position of the shock absorber and press the car body with force. If the car jumps on more than once or twice, it means it working well. If the car keeps nodding up and down and the car body swings up and down more than three times, the shock absorber is broken.

     

    Hazard of broken shock absorber ⇢ DANGERS！⇢

     

        1、If the shock absorber is not replaced due to oil leakage, the shock absorption effect of the vehicle will be reduced after long-term driving, causing the vehicle to make abnormal noise when driving to the bumpy road section, damaging the whole suspesion and causing the suspension deformation.

     

        2、The oil leakage of shock absorber will cause uneven force on both sides of the tire, resulting in the obstruction of vehicle control, and the long time will cause the tire deviation and other faults.Finally, the cost of repairing the car will be higher than replacing a shock absorber.

     

        3、If the broke shock absorber is not replaced for a long time, it will also affect the ride comfort, increase the driving safety risk and cause potential danger.

     

    Important Points:
    ➡️before Placing an Order, Be Sure to Check the Compatibility and Confirm That This Part Is Suitable for Your Vehicle.
    ➡️ to Confirm, Please Select a Vehicle from the "My Garage" List or Enter Your Vehicle Details Above to Ensure That Your Model Is Included in the Compatibility Table.
    ➡️ if You Encounter the Problem That You Can't Confirm Whether the Model Is Suitable, Please Contact Me. I Can Quickly Answer the Adaptability Problem for You. Thank You for Your Cooperation and Support!

     

    Note：
    ✅ Ebay Compatible List Can Not Show up All Car Model, and Sometimes It May Have Mistake, and May Not 100% Accurate or out of Date.
    ✅ Please Check the Manul of Your Vechicle and Choose the Correct Good.
    ✅ If You Are Not Sure the Which Socket Your Vehicle Need.
    ✅ Please Send Us Your Car Make, Model, Year and Other Information,We Will Help to Check Which You Need.
    ✅ If You Have Any Questions, Please Do Contact Us.thank You!

     

    1

     

     

     

     
    Item Specifics
    Brand Unbranded
    Merchandise Type Strut Assembly
    Product Type Quick Complete Struts & Coil Springs
    Material Powder Coat
    OE Spec or Performance OE Spec
    Fitment Type Direct Replacement
    Gas Charged Shock Yes
    Adjustable No
    Placement on Vehicle Front, Left, Right
    Kit or Single Part Kit
    Kit Parts Included Shock Aborber
    Quantity 2 Pcs
    Manufacturer Part Number AP119219A1C18
    UPC Does not apply
    Manufacturer Warranty Lifetime
    Interchange Part Number 172245
    Modified Item No
    Custom Bundle Yes
    Color Black
    Features Sealed
    Note 1 FAST & FREE SHIPPING
    Note 2 LIFETIME WARRANTY
    Note 3 US WAREHOUSE
    Note 4 DURABLE & BRAND NEW


    Dedicated to building the most competitive auto lighting brand, KAC has built an expert technical team to work out the higher performance LED lighting solutions and established a long-term partnership with many high-quality suppliers in the industry who can provide us with quality parts and chips all at an extremely competitive price through the long-lasting efforts.
     
    All the cooperated suppliers are selected strictly by the expert and experienced team of KAC.
     
    Adhering to the brand principle ---The high-quality material creates excellent products
     
    brand slogan---Light Up You More
    KAC has committed to do our utmost to serve more vehicles models with the most competitive products both in price and service, including headlights, foglights, headlight assembly, etc., aiming at the largest group of customers. Paired with our
    innovative technologies, fast shipping and satisfaction guarantee, we’re able to ensure that all the customers can get the product when they need it.
    1) KAC accepts all major credit cards via PayPal,MasterCard, Visa, American Express and Discover.
    2) We will only ship to the confirmed PayPal shipping address given with the payment.
    3) If you want to ship to aother address, please change your PayPal shipping address before you make payment.
    4) To avoid initiating an unpaid item claim, please pay within 7 days.
    1) KAC offers 5 years warranty and a 60 days free return.
     
    Disclaimer: KAC provides a 60-Day easy return satisfaction guarantee. Items to be returned must be in original factory condition.
     
    2) We offer a free return & money-back guarantee. If you are not satisfied with the product for any reason, you can return the item for refund or replacement/exchange. All returns must include the original packaging. (Please refer to our return policy for details.)
    If you have any questions, please contact us via eBay message.
     
    3) Any items damaged because of incorrect installation will not be refunded. 
    4) Unauthorized reselling of KAC products is strictly prohibited and we can't honor the warranty if purchasing from an unauthorized reseller.
     
    1) We will ship items locally for US buyers. Usually, for US buyers it will take about 5-7 business days to reach. If you don't get it, please contact us firstly, we'll try our best to support you.
    2) For US customers, all items will be shipped out within 1-2 business days with cleared payment. Please include your phone number in the payment note for prompt and secure shipment.
    3) Tracking numbers for all orders are added to eBay once they have been dispatched; please log in to eBay to find the tracking information for your order.
    If you have ANY questions with shipping, product or service, please Contact Us first before leaving feedback/writing a review or filing a return case. We will solve the problem!
    We always put our customers first and your satisfaction is guaranteed.
    Our KAC Tech are here to serve you. Email us and our expert team will swiftly diagnose the issue and offer the best solution within 12-24 business hours. All off-hours emails will be answered within 24-48 hours.


    DataCaciques