• Features:
  •  
  • 1. Application: Fits all Seastar Steering Cylinders, Trim and Tilt Caps on all Four Stroke Yamaha V6, Trim and Tilt Caps on Non-VMAX 2 Strokes (225-300hp), and Tilt Caps on the 2011-Current F150. This wrench is not compatible with VMAX.
  •  
  •  
  • 2. Function: To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
  •  
  •  

    • VT-MOTOR

    Professional auto parts

    Outboard Trim/Tilt Pin Wrench Cylinder Caps MT0004-38mm X 4mm for Seastar Yamaha

    Features:

     

    1. Application: Fits all Seastar Steering Cylinders, Trim and Tilt Caps on all Four Stroke Yamaha V6, Trim and Tilt Caps on Non-VMAX 2 Strokes (225-300hp), and Tilt Caps on the 2011-Current F150. This wrench is not compatible with VMAX.

     

     

    2. Function: To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder

     

     

    3. A Must Have: Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap, you will thrown them away, which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease

     

     

    4. Material: Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use.Better than OEM.

     

     

    5. Satisfaction Guarantee: If you're not 100% satisfied with this pin wrench MT0004, simply return it for a full refund in 30 days, guarantee with 12 month's warranty.


    Descriptions:

     

    Outboard Trim/Tilt Pin Wrench MT0004-38mm x 4mm

     

     

    Fitment:

     

    All SeaStar Steering Cylinders
    Trim and Tilt caps on ALL Four Stroke V6 (F200-F300)(3.3L, 4.2L)
    Trim and Tilt Caps 2 strokes (225-300hp)(Non VMAX)
    Tilt Cap ONLY on 2011-Current F150
    Does NOT fit VMAX

     

     

    Function:


    Rebuild the trim seal on the trim and tilt unit. Used to remove and install the trim caps without damage

     

     

    Replacement:


    AMT0005 - S-4mm
    Yamaha Factory Tool: YB-06175-2B

     

     

    Package Included:

     

    1 x Trim Tilt Pin Wrench

     

     

     

    Satisfaction Guarantee:

     

    If you're not satisfied with the tool, simply return for a full refund in 60 days or get a replacement during 1Years' warranty via our customer service.


    Item Specifics
    Brand Unbranded
    Manufacturer Part Number VTQP982
    Type Trim Tilt Pin Wrench
    Features For 2001-2010 GM Duramax 2500/3500 Diesel 6.6L
    Material STEEL
    Fitment For Seastar Steering Cylinders, All 4 Stroke Yamaha V6
    Size 38mm X 4mm
    Color Black
    Warranty 1 Year
    Weight 0.16kg

    Payment

    1. Payment methods accepted: Payoneer.  Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.

    2. Please make sure your Ebayaddress is correct  before you pay, cause it cannot be changed once the order shipped out.

    Shipping

    1. Item will be shipped out within 1-2 business day after clear payment received.

    2. Please make sure shipping address on your ebay account is correct & up-to-date.

    3. Please feel free to contact us by email if you cannot get your order in time.

    Returns

    We offer a 60-day money-back guarantee, as long as the item has not been installed on a vehicle and in the same condition when purchased. 

    The process for returns: 

    1. Contact us via eBay with any concerns or issues with the product you received.

    2. Begin a Return Request on your eBay account. 

    3. You will be sent a return label via eBay.

    Contact Us

    We  maintain high standards of excellence Four 5-star rating

    and strive for 100% customer satisfaction! 

    If you are not satisfied with our product or our Service,please feel free to contact us

    immediately BEFORE you leave neutral or negative

    feedback, we will try our best to resolve any problem and make you satisfied.

     

    Please contact us via ebay using"Contact member". 

    We will respond within 1 business day or less.

    Thank you for your understanding.

     

    Our office hours is as below :

    - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday

     

    We will respond within 1 business day or less.

    VT-MOTOR

    Professional auto parts

    Outboard Trim/Tilt Pin Wrench Cylinder Caps MT0004-38mm X 4mm for Seastar Yamaha

    Features:

     

    1. Application: Fits all Seastar Steering Cylinders, Trim and Tilt Caps on all Four Stroke Yamaha V6, Trim and Tilt Caps on Non-VMAX 2 Strokes (225-300hp), and Tilt Caps on the 2011-Current F150. This wrench is not compatible with VMAX.

     

     

    2. Function: To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder

     

     

    3. A Must Have: Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap, you will thrown them away, which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease

     

     

    4. Material: Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use.Better than OEM.

     

     

    5. Satisfaction Guarantee: If you're not 100% satisfied with this pin wrench MT0004, simply return it for a full refund in 30 days, guarantee with 12 month's warranty.


    Descriptions:

     

    Outboard Trim/Tilt Pin Wrench MT0004-38mm x 4mm

     

     

    Fitment:

     

    All SeaStar Steering Cylinders
    Trim and Tilt caps on ALL Four Stroke V6 (F200-F300)(3.3L, 4.2L)
    Trim and Tilt Caps 2 strokes (225-300hp)(Non VMAX)
    Tilt Cap ONLY on 2011-Current F150
    Does NOT fit VMAX

     

     

    Function:


    Rebuild the trim seal on the trim and tilt unit. Used to remove and install the trim caps without damage

     

     

    Replacement:


    AMT0005 - S-4mm
    Yamaha Factory Tool: YB-06175-2B

     

     

    Package Included:

     

    1 x Trim Tilt Pin Wrench

     

     

     

    Satisfaction Guarantee:

     

    If you're not satisfied with the tool, simply return for a full refund in 60 days or get a replacement during 1Years' warranty via our customer service.

    Item Specifics
    Brand :Unbranded
    Manufacturer Part Number :VTQP982
    Type :Trim Tilt Pin Wrench
    Features :For 2001-2010 GM Duramax 2500/3500 Diesel 6.6L
    Material :STEEL
    Fitment :For Seastar Steering Cylinders, All 4 Stroke Yamaha V6
    Size :38mm X 4mm
    Color :Black
    Warranty :1 Year
    Weight :0.16kg


    1. Payment methods accepted: Payoneer.  Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.

    2. Please make sure your Ebayaddress is correct  before you pay, cause it cannot be changed once the order shipped out.

    1. Item will be shipped out within 1-2 business day after clear payment received.

    2. Please make sure shipping address on your ebay account is correct & up-to-date.

    3. Please feel free to contact us by email if you cannot get your order in time.

    We offer a 60-day money-back guarantee, as long as the item has not been installed on a vehicle and in the same condition when purchased. 

    The process for returns: 

    1. Contact us via eBay with any concerns or issues with the product you received.

    2. Begin a Return Request on your eBay account. 

    3. You will be sent a return label via eBay.

    We  maintain high standards of excellence Four 5-star rating

    and strive for 100% customer satisfaction! 

    If you are not satisfied with our product or our Service,please feel free to contact us

    immediately BEFORE you leave neutral or negative

    feedback, we will try our best to resolve any problem and make you satisfied.

     

    Please contact us via ebay using"Contact member". 

    We will respond within 1 business day or less.

    Thank you for your understanding.

     

    Our office hours is as below :

    - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday

     

    We will respond within 1 business day or less.


    All rights reserved.