Kit Includes:

(1) Rear Driver Side Strut & Spring Assembly
(1) Rear Passenger Side Strut & Spring Assembly

 

Fitment

  • 1997-01 For toyota Camry L4 2.2L Rear Driver & Passenger Side Strut & Spring Assembly Set
  • 1999-03 For toyota Solara Rear Driver & Passenger Side Strut & Spring Assembly Set

 

How to Install :

 

Step 1: Before You Lift the Vehicle, Loosen Lug Nuts One Full Turn.

Step 2: Jack up Vehicle and Use Jack Stands for Safety & Remove the Tire from the Rotor.

Step 3: (Wheel Alignment Is Necessary After Strut Replacement.) Marking the Position of All the Bolts Will Help Keep the Alignment Close to Original and save Time Aligning. Use a Colored Pencil to Mark the Old Strut on the Bolt.

Step 4: Use Penetrating Oil (Such As Wd40) to Coat Any Rusted Fasteners, Let Soak for Approximately 1 Hour.

Step 5: (Optional) While Waiting for Oil to Soak, Take This Time to Inspect All Other Components That May Need Replacement (Brake Pads, Rotors, Brake Hoses, Ball Joints, Cv Boots, Tie Rod Ends, Bushings, Sway Bars, Etc).

Step 6: Remove Any Brake Line or Wire Attachments from the Strut Body. Do Not Disconnect Brake Lines (If Possible)! Opening Brake Lines Will Require Bleeding of the Brake System.
Use Extreme Caution When Removing Brake Lines from Your Struts, As Any Damage to Your Brake Line Can Result in Expensive and Time Consuming Repairs.

Step 7: Remove Sway bar Attached to the Strut Assembly or Control Arm.

Step 8: Remove the Tie Rod (Only If It Attached to the Body of the Strut, If Not Leave It Attached to the Steering Knuckle).

Step 9: Remove the Strut to Knuckle Bolts at the Bottom of the Strut. on some Vehicles, the Brake Caliper and Rotor May Need to Be Removed to Gain Access.

Step 10: Remove the Upper Mounting Plate Bolts Located in the Engine or Trunk Compartment. Do Not Remove the Center Retaining Nut! It Is Not Safe to Unload the Spring from the Assembly in This Position.

Step 11: Carefully Remove the Old Strut Assembly from the Vehicle. Be Very Cautious Not to Let the Strut "Drop" down on Your Brake Line, Rotor or Drum.

Step 12: Install the New Complete Strut Assembly in the Reverse Order As Above (Steps 11-6). Using an Anti-seize Compound on All Fasteners Is Suggested.

Step 13: Carefully Double Check Your Work and Make Sure Everything Is Tightened to Manufacturers Torque Specifications.

Step 14: Replace the Tire the Rotor and Tighten to Manufacturers Torque Specifications.

Step 15: Slowly Lower the Vehicle down After Removing the Jack Stands. Pay Very Close Attention to Any Odd Sounds When the Vehicle Is Lowered Onto the New Complete Strut Assemblies.

Step 16: It Is Very Important That You Immediately "Road Test" Your Vehicle Right Away to Ensure That Installation Was Done Properly. Listen and Feel for Common Signs of Incorrect Installation While Driving Slowly over Speed Bumps, Rough Road or Potholes.

点击输入公共文案

Item Specifics
Brand KAC
OE/OEM Part Number 171681,171680
Interchange Part Number 171681 171680
Fitment Type Direct Replacement
Type Strut & Coil Spring Assembly
Placement on Vehicle Rear, Left, Right
Manufacturer Part Number MIA237253
Manufacturer Warranty 5 Years
Superseded Part Number 171681,171680
MPN MIA237253
UPC Does not apply
Custom Bundle No
Material Steel
Kit or Single Part Kit
Part Type Strut & Coil Spring Assembly

Paypal only, eBay will be held until cleared, All ship to paypal address. Appreciated for the prompt payment, Contact us if bid by mistake, system open unpaid item automatically.

Payment must be complete within 3 days from the date you purchase or after the end of auction. Items unpaid within 3 days of the auction end will be forfeited. We reserve the right of cancel the order and re-selling the items.

DOMESTIC LOWER 48 US STATES: FREE

VERY IMPORTANT:

Double check shipping address. We are not responsible for incorrect or undeliverable addresses.

Please use Shipping & Payments tab on top of page for shipping details for your location.

US Territories such as GU, VI, SAIPAN will be charged the same as CANADA shipping rate. Transaction will be held until a full shipping amount received.

Some of the packages cannot be delivered to a PO Box. Customer is responsible to ensure PO Box address given is deliverable by the shipping company. Package will be held until a valid physical address is provided.

International buyers are responsible for all customs duties, taxes, and other applicable fees incurred by the country's customs/border regulations. Please contact customs for more information.

We ship 98% of all orders the same or next business day after payment received/cleared. Please understand that once orders are shipped, we cannot control the transit times thereafter. Most orders will ship via USPS First Class/Priority Mail or FedEx/UPS or the best suitable carrier for the specific size of the product.

30 Days Free Returns, please notify us within 30 days after you've received your order.


how to process return ?

1:contact seller first
2: send images : outer package & scan label & item itself & with complete accessories etc
necessary condition 
rule A: item with original package in unused condition .
rule B: outer package without any damage.

3: get the return label for return 

4: item delivered -payment repay 
(Returns or exchanges will be subject to a 15% restocking fee of the original item purchased plus cost of 
return shipping and replacement shipping. 
Exchanges due to shipping errors by will not be subject to a restocking fee or shipping charges)

Priority:
in the condition o the below reasons.the shipping cost will be undertake by buyers 
1: order accidently
2: find better price 
3: change mind 

kindly note:
accessory missing/ quality issue/ shipping damage.etc 
please contact us for good solution first instead of opening return dispute.


Please leave five stars positive feedback positive comment and Five-Stars.

Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,

communication Please!

(NO

 Three stars is LOW star, NO 1,2,3 stars PLEASE!

(YES

 Please give us Five-star!

Have Question or Problem??

Step 1: Contact seller

Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message. NO others please!

Select a topic:

I have a question about using my item or I want to send the seller a message(0)(YES)

YES, THIS ONE!!! We will try our best to solve online if possible, if not, will give correct return address.

I did not receive my item(2)(NO)

I need to return my item(1)(NO)

I receive an item that was not as described(1)(NO)

Request to cancel this order(1)(NO)

Step 3: Describe your question clearly; we will give you the best solution

We will help you to track the parcel all the way and give best solution for your order, please do not open case before give us a chance for communication!

1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.

2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.