Off-Road Front Rear Bumper For 2016-2023 Toyota Tacoma w/Winch Plate LED Lights
| Front Bumper 1 - Audacious, angular off-road design with low-profile hoop
- Protects vehicles from on & off-road debris
- Heavy-duty, high tensile 11-gauge(1/8 Inch) steel for the bumper main body, 8-gauge(11/64 Inch) for the structure mounting bracket
- Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use
- High strength D-Ring mounts welded both inside and out with 4.75-ton capacity. 9500 lbs rated,3/4'' D-rings included
- Built-in winch plate – only fits advanced wireless remote operate winch without a manual clutch handle. Rated up to 12,000 pounds.
- 4×18w LED spotlights included. Come with a light mounting port for a 31.5" LED light bar.
- Not Compatible with Factory Sensors
- Moderate installation requires trimming of the factory bumper
- Bumper weight: about 141 lbs
- Cutting Required for Installation
|
| Front Bumper 2 - Reaper Full Width Front Bumper
- 3-piece modular design. Exciting off-road styling with a strong bull bar
- Audacious, angular off-road design that provides an increased approach angle
- Decorated with honeycomb steel plates
- High strength D-ring mounts welded both inside and out with a 4.75-ton capacity. D-rings not included
- Comes with a winch plate that is rated up to 12, 000 lbs
- License plate mounting bracket included
- Features 4×25W LED spotlights
- Equipped with a solid skid plate
- Not compatible with factory parking sensors
- Heavy-duty 11-gauge(1/8 inch) steel plate for bumper main body, 1.57"×0.06" steel tube for the bull bar, 9-gauge(5/32 inch) steel plate for the winch plate and mounting structure
- Textured black powder coat finish & Premium E-coating process inside
- Bumper weight: about 86 lbs
- Moderate bolt-on installation. Requires cutting part of the factory plastic bumper cover
|
| Front Bumper 3 - Discovery Ⅰ full-width front bumper
- 3-piece modular design. Rugged styling with an angle bull bar
- Protects vehicles from on & off-road debris
- High strength D-ring mounts welded both inside and out with 4.75-ton capacity. D-rings not included.
- Equipped with a license plate mounting bracket
- Comes with a winch plate that is rated up to 12, 000 lbs
- Features a solid skid plate
- Equipped with a 72W LED spot light bar
- Works with factory fog lights or 4-inch LED fog lights(Not Included)
- Not Compatible with front parking sensors
- Heavy-duty 11-dauge(1/8 inch) steel plate for bumper main body,
- 9-gauge(5/32 inch) steel plate for the winch plate and mounting structure
- Textured black powder coat finish & Premium E-coating process inside
- Bumper weight: about 103 lbs
|
| Rear Bumper 1 - Rugged Styling and Protection
- Heavy-duty, high tensile 11-gauge(1/8 inch) steel for the bumper main body, 7-gauge(3/16 inch) for the mounting brackets
- Textured black powder coat finish & Premium E-coating process inside
- High strength shackle mounts welded both inside and out with 4.75-ton capacity
- Includes a license plate light and 2×18w high power LED floodlights
- License plate mounting plane included
- Compatible with factory back-up sensors
- Accommodates factory hitch receiver
- Decorated w/ "Hooke Road" LOGO
- Bumper weight: about 58 lbs
- Bolt-on installation w/ clear and detailed instruction
|
| Rear Bumper 2
- Rear Bumper provides adequate front-end protection
- One-piece, fully-welded structure
- Heavy duty 11-gauge(1/8 Inch) steel construction
- Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use
- 2×18w LED floodlights included
- License plate mounting bracket included
- Pre-formed cut-outs to accommodate factory license plate lights
- Integrated corner side steps for convenient truck bed access
- Works with factory receiver hitches
- Decorated w/ "Hooke Road" Logo
- Bumper weight: about 53 lbs
- Simple bolt-on Installation w/ detailed instruction
- Compatible with factory back-up sensors. Pre-drilled holes for sensors to fit properly. Professional installation is recommended.
|
| Rear Bumper 3 - Solid and lightweight steel bumper. Perfect for overland trails.
- One-piece structure
- Features high strength D-ring mounts. D-rings are not included.
- Includes a license plate light and 2×18w LED spotlights
- License plate placing plane and mounting holes included
- Compatible with factory backup sensors
- Works with the factory hitch receiver
- Heavy-duty, high tensile 11-gauge(1/8 inch) steel for the bumper main body
- Textured black powder coat finish & Premium E-coating process inside
- Bumper weight: about 50 lbs
- Bolt-on installation. Mounting hardware included.
|
COMMON FEATURES
Fitment: 2016-2023 Toyota Tacoma Models
Description
- Exciting Off-Road Styling. The Hooke Road Reaper Full Width Front/Rear Bumper is designed with exciting off-road styling and a robust bull bar, making it perfect for adventurous enthusiasts. Its audacious, angular design not only enhances the vehicle's appearance but also provides an increased approach angle, allowing for better off-road maneuverability. The bumper features eye-catching honeycomb steel plates that add to its rugged charm. Additionally, it comes with high strength D-ring mounts welded both inside and out, offering a 4.75-ton capacity for reliable recovery options. With a winch plate rated up to 12,000 lbs and 4×25W LED spotlights, this bumper is fully prepared for any off-road challenges. However, it is important to note that it is not compatible with factory parking sensors.
- Heavy Duty Construction. Crafted from heavy-duty 11-gauge(1/8 inch) steel plate for the main body, 1.57"×0.06" steel tube for the bull bar, and 9-gauge(5/32 inch) steel plate for the winch plate and mounting structure, this front bumper ensures exceptional durability and off-road performance. Its textured black powder coat finish and premium E-coating process inside not only provide a sleek look but also enhance resistance against rust and corrosion, ensuring long-lasting protection and appearance. With a weight of approximately 86 lbs, the bumper strikes a balance between strength and weight, ensuring it won't weigh down your vehicle during off-road excursions.
- Moderate Bolt-on Installation. Installation of the Hooke Road Reaper Full Width Front Bumper is a moderate bolt-on process, which requires cutting part of the factory plastic bumper cover. Professional operation is highly recommended. After the trimming, assemble the components to be a whole bumper. Then place the bumper onto the vehicle frame and tighten up all the bolts. The bumper comes with clear instructions and all necessary hardware, making the installation manageable for those with moderate mechanical skills. With proper guidance and tools, the installation can be accomplished efficiently.
