Follow the steps below for some handy tips for replacing engine mounts. 

• Step 1: Check for clearance against the firewall before attempting to raise the engine. Tearing radiator hoses, crimping AC lines or cracking distributor caps should be avoided.
• Step 2: Secure the engine on a jack with various blocks of wood. Never jack an engine directly by the oil pan. The pan will bend and rupture.
• Step 3: Loosen the engine from the mount bolts. Sometimes a long extension and universal joint is the way to go.
• Step 4: Next, crawl under the vehicle and loosen the mount-to-frame bolts.
• Step 5: Jack-up the engine a little at a time and remove the motor mount.
• Step 6: Compare the old and new motor mounts. Transfer any heat or drip shields to the new mount.
• Step 7: Thread in the mount-to-frame bolts before lowering the engine. This will simplify mount alignment.
• Step 8: Lower the engine and fully tighten all bolts.
• Step 9: Front-wheel-drive vehicles often have third "dog-bone" motor mounts.

Interchange Part Numbers:

• GP9945 / A65095 / EM7296 / 9945 / 50822T5RA01 : Motor Mount - Right
• GP9863 / A65063 / EM7127 / 9863 / 50890T5A911 : Torque Strut Mount - Rear
• GP9944 / A65062 / 9944 / 50850T5H003 : Transmission Mount - Left

Fits The Following :

• Fits: 2015-2020 Honda FIT 1.5L EX/EX-L, i-VTEC - AUTO Transmission

?

For more detailed fitment information please consult the Compatibility Table above or send us a message with your vehicle's VIN number.

Package Includes:

• 1x Motor Mount - Right
• 1x Torque Strut Mount - Rear
• 1x Transmission Mount - Left

Please BE AWARE that the vehicle compatibility list on eBay may not be 100% accurate. However the OE number provided in our listing is. If you are not certain about compatibility of the parts you wish to purchase, send us your VIN. Match the result with the OE number we have in the listing and that would be the Best way to guarantee fitment.

Please remember to wear protective gear when handling and/or installing any auto part.