Product description

Fits: PZ20 TaoTao NST SUNL Buyang Coolsports AIM-EX Roketa Kazuma 50cc 70cc 90cc 110cc 125cc.

Replacement part for many 4-stroke Chinese ATVs, Dirt Bikes, Go Karts and Scooters with horizontal engine.

Models: Kazuma Meerkat 50cc Atv Carburetor,Kazuma Falcon 90 Atv Carburetor,Kazuma Viper 110cc Dirt Bike Carburetor.

Function: Increase the horsepower and airflow for your bike, and have more fun with the power at your finger tips.

Material: Made of international ATC12 Aluminum Alloy.Can effective anti-oxidation and anti-corrosion.

Details:

Package includes: 2 PCS (1PCS Includes 1 carburetor,1 fuel line,4 clamps,1 fuel filter).

Intake Mount Inner Diameter: 0.77inch/20mm

Bolting Hole Distance: 1.87 inch/48mm

Air Filter Mount Diameter: 1.1 inch

Fits most Chinese brand 49CC 50CC 70CC 90CC 100CC 125CC ATV QUAD DIRT BIKE

Also Fits 49CC-125CC SSR SDG Lifan Pister Pro Dirt Bike

Materials: alloy

Intake Mount Diameter: 20mm

Bolting Hole Distance: 48mm

Air Filter Mount Diameter: 32mm

Fit:TaoTao Kazuma Baja 50cc 70cc 90cc 110cc 125cc

Fit:2004 2005 2006 2007 2008 2009 2011 2012 2013 Honda CRF80F

Fit: 1979 1980 1981 1982 1983 1984 Honda XR80

Fit:2004 2005 2006 2007 2008 2009 2011 2012 Honda CRF50

Fit:1984 1985 1986 Kawasaki KLT110

Steps

1- Unscrew and pull the top of the carb off with the cable and there will be a slide with the needle in the center.

2- Disconnect the cable through a small slot in the side of the slide.

3- Now you can take the needle out from the slide.

4- The needle will have a very small e clip in a slot on the needle. The needle will have 5 slots. Lowering the clip is richer the and raising the clip will lean it out.

5- Put the clip on the lowest setting for cold weather. DO NOT DROP THE CLIP! They are very small and hard to find.

6- Reverse the process with installing the needle back into the slide, installing the cable, slide the slide back into the carb and screw the cap tight.

Attention

1. Make sure the air cleaner is clean.

2. make sure the choke lever is OFF while running.

3. Warm the engine up for 3-5 minutes.

4. Turn the mixture screw clockwise until fully closed,

then turn the mixture screw 2 full turns out.

5. Adjust the idling screw until the engine idles EASILY.

6. Turn the mixture screw slightly clockwise and

counterclockwise until the highest engine REVs is obtained.

Please check the picture before you buy.