A headlight (headlamp) is a lamp attached to the front of a vehicle to light the road ahead. Headlight performance has steadily improved throughout the automobile age, spurred by the great disparity between daytime and nighttime traffic fatalities. Headlights are one of the most important components of your vehicle; they allow you to see the road in front of you clearly during the night and in any bad weather that may arise. Our headlights upgrade the face of your vehicle with clear style and extreme range.

 

About this item:

 

• 【Fitment】Compatible with  2010-2011 Toyota Camry, OE# 8111006520 / 8115006520

 

• 【Improved Beam Pattern】Ultra-clear lens and reflector improve the beam pattern to present a decent cut-off line without affecting the driving of the oncoming car, ensuring your safety.

​

• 【 IP65-Rated Water-Resistant】KAC full sealed headlamp assembly is made of durable OEM grade ABS plastic with up to 50000 Hr's lifespan and IP65-rated water-resistant to ensure incredible weather-resistance and impact resistance, say goodbye to fogging problems.

​

• 【Easy to Install】The bolt-on style KAC headlights are almost the same as factory parts. Direct OEM replacement, just plug n play within 20 minutes without any modification or drilling.

​

• 【Cool Appearance】KAC headlights' stylish design makes your vehicle look unique on the road, cool and new!

​

KAC Headlights

 

A new pair of KAC headlights from ours allow you to see the road in front of you clearly during the night and in any bad weather that may arise.Gives you and your family safer nighttime driving.Makes your car looks newer.See road markings and traffic sighs better.Driving at night can be a scary proposition - and it's even scarier if you can't see the road well.

　

A dim, cloudy, yellowed, or otherwise damaged or non-functioning headlight makes driving dangerous,not only is your own safety at risk, but the safety of others is as well.

 

Toyota Camry Headlight Housing from KAC , Replacement Headlight Assembly for 2010-2011 Toyota Camry, OE# 8111006520 / 8115006520

 

• Left and right side original equipment replacement headlight assembly for 2010-2011 Toyota Camry. Replacement OEM part numbers: 8111006520 / 8115006520

 

• These direct aftermarket replacement headlight assemblies are 100% OE standard, produced by suppliers from the automotive OEM market and are SAE/DOT approved. Please note that bulbs are not included

 

• KAC replacement headlight assemblies exactly match the specifications of the original manufacturer's design and no modification is needed. Wiring, switch and screws not included 

 

• The beam level can be adjusted with adjusters. Made with the highest grade components for premium reliability and performance, offers enhanced visibility and meets all relevant safety standards

 

• Clear lens for superb clarity, IP65-rated water-resistant and durable to withstand all weather conditions, with vent holes in the housing to avoid moisture and fogging problems

 

Product Description

 

Designed for:

• 2010-2011 Toyota Camry

 

Lens color: Clear headlight/Amber side marker

Part replaces these OE numbers:

8111006520/8115006520/Partslink TO2503195/Partslink TO2502195/Hollander DEPO 312-11B5R-AS3/Hollander DEPO 312-11B5L-AS3

 

Bulbs: High/low beam – 9005/H11 (Bulbs NOT included)

 

 

KAC original replacement headlight assemblies are made from premium components and manufactured to the highest standards. This replacement fog light assembly offers reliability and long-lasting performance.

This aftermarket headlight assembly for 2010-2011 Toyota Camry is a direct OE replacement that has been built to match the exact specifications of the original manufacturer’s.

 

The clear lens offers enhanced road illumination and improved visibility.

 

Package Includes:
2PCS  Headlights Assembly 

(Driver's Side & Passenger's Sides)

 

NOTE:

1.This Headlights have been specially designed to match factory standard, they will replace your original lights directly !

2.Using your factory supplied connector/harness will avoid cutting or modifying any wires.
3.We also have more models availuable ,please contact us if you can't find your specific model.

4.Lifetime Warranty & 60 days return, Product warranty are offered within 60 days from item receiving. Warranty are for REPLACEMENT only and cover for any manufacturer's defect.

5.100% Brand New!
6.Professional Installation is Highly Recommended.
7.Installation Instruction is NOT Included.

 

KAC original replacement headlight assemblies are made from premium components and manufactured to the highest standards. This replacement fog light assembly offers reliability and long-lasting performance.

This aftermarket headlight assembly is a direct OE replacement that has been built to match the exact specifications of the original manufacturer’s.

 

The KAC lens offers enhanced road illumination and improved visibility.

 

TIPS:

 

①.Installation Guide:

 

1.Undo the Screws, Clips, or Retainer Springs That Hold the Headlight in Place.

2.Disconnect the Wiring from the Assembly.

3.Detach the Headlight from the Vehicle to Replace It with a New One.

4.Fit in the New Headlight Assembly.

5.Fix the New Headlight into Place and Make Sure That the Screws, Clips, or Retainer Springs Used Are Sealed.

6.Reconnect the Wiring That Was Unplugged from the Assembly.

7.Put Back the Grille and Other Components That You Removed. Seal Them Back into Place.

8.Test the New Assembly.

 

②.Adjustment Guide:

 

Before You Begin to Adjust the Light, Make Sure Check the Alignment of Your Lights First. Park the Vehicle About 10 to 25 Feet from the Wall with the Lights Aimed at the Wall. the Centerlines of the Headlights Should Not Be Any Higher than 3.5 Feet Above the Ground.

1.Find the Adjustment Screws. 

Firstly, Locate the Adjustment Screws on Your Vehicle.

2.Adjust the Headlight Individually.

Adjust the Headlights Individually. the Headlights Should Be Adjusted One at a Time. Put a Rag or Towel over a Chair in Front of the Light You Want to Block. Covering the Light Assembly Directly Can Damage the Plastic Lens.

3.Adjust the Vertical Field. 

The Screw on the Top of the Light Housing Should Be Turned Clockwise to Raise the Lights and Counterclockwise Will Lower the Light. the Headlight Should Be Adjusted Until the Top of the Most Intense Part of the Light Beam Shines Directly on or Just Below the Center of the Tape Line on the Wall.

4.Test Your Results.

 

Important Points:
➡️before Placing an Order, Be Sure to Check the Compatibility and Confirm That This Part Is Suitable for Your Vehicle.
➡️ to Confirm, Please Select a Vehicle from the "My Garage" List or Enter Your Vehicle Details Above to Ensure That Your Model Is Included in the Compatibility Table.
➡️ if You Encounter the Problem That You Can't Confirm Whether the Model Is Suitable, Please Contact Me. I Can Quickly Answer the Adaptability Problem for You. Thank You for Your Cooperation and Support!

 

NOTE:
✅ Ebay Compatible List Can Not Show up All Car Model, and Sometimes It May Have Mistake, and May Not 100% Accurate or out of Date.
✅ Please Check the Manul of Your Vechicle and Choose the Correct Good.
✅ If You Are Not Sure the Which Socket Your Vehicle Need.
✅ Please Send Us Your Car Make, Model, Year and Other Information,We Will Help to Check Which You Need.
✅ If You Have Any Questions, Please Do Contact Us.thank You!

 

TIPS:
Due to shooting angle
Picture exposure lighting monitoring display and many other reasons
There will be a slight color difference between the product and the actual item 
thank you