• 6006 m-Series Battery Selector Switch Knob Marine Red
  •  
  • Specifications:
  • Material:ABS
  • Color:Red
  • Product type:6006
  • Switch Type: Single Circuit ON-OFF
  • Maximum Voltage: 48V DC
  • Continuous Rating: 300A
  • Intermittent Rating: 500A
  • Cranking Rating 30 sec: 900A
  • Terminal Stud Size: 3/8″ – 16 (M10)
  • Switch Positions: 2
  • Function: prevent electric leakage, protect power supply and safely cut off current
  •  
  •  
  • Features:
  • *Heavy duty
  • Made of ABS plastic + Metal materials for safety use and avoiding short circuits of rear cover insulates terminals.
  • *Operation
  • 12-48V 6006 Battery M-Series Disconnect Switch On Off for Power marine boat RV‘s

    6006 m-Series Battery Selector Switch Knob Marine Red

     

    Specifications:

    Material:ABS

    Color:Red

    Product type:6006

    Switch Type: Single Circuit ON-OFF

    Maximum Voltage: 48V DC

    Continuous Rating: 300A

    Intermittent Rating: 500A

    Cranking Rating 30 sec: 900A

    Terminal Stud Size: 3/8″ – 16 (M10)

    Switch Positions: 2

    Function: prevent electric leakage, protect power supply and safely cut off current

     

     

    Features:

    *Heavy duty

    Made of ABS plastic + Metal materials for safety use and avoiding short circuits of rear cover insulates terminals.

    *Operation

    On/Off 2 positions, 500A momentary rate

    *Compatible

    Used for DC 12-48V systems to isolate and secure the electrical system, can stand alone or be locked together with other switches.

    *Purpose

    Eliminate any power draw from the battery when the vehicle or boat is not in use, and disconnect the battery safely

    *Wide Application

    Widely used for Cars, Marine, Boats, RVs, Campers, Travel Trailer, Trucks, ATVs, UTVs, Battery banks, and other Devices

    *Super Safety

    Battery disconnect switch can disconnect the battery safely to eliminate any power draw from the battery when the vehicle or boat is not in use

    *Easy to Install

    The battery switch is super easy to install.

    *Advantages

    1. Tin-plated copper studs for maximum conductivity and corrosion resistance.

    2.Studs accept 3/8" (M10) ring terminals

    3.7/8" (22mm) stud length accepts multiple cable terminals.

    4. The one-piece terminal stud design will never loosen over time.

    5. Rated IP66 from water projected in powerful jets.

     

    Packaging include:

    Battery Selector Switch*1

     


    Item Specifics
    Material ABS
    Brand AUXITO
    Featured Refinements Boat Switches
    Reference Number 6006
    Warranty 1 Year
    Color Red
    Maximum Voltage 48V DC
    Continuous Rating 300A
    Intermittent Rating 500A
    Cranking Rating 30 sec 900A
    Terminal Stud Size :3/8″ – 16 (M10)
    Switch Positions 2

    Payment

    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

    (2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (3). Before payment,Please keep the consistency of Paypal address and ebay address.

    (4). Quantity orders are welcome!

    Shipping

    (1) All items will be shipped in 24 hours after receiving your payment .

    (2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    Returns

    (1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    (2). All returned items should be in the original packaging , return tracking information should be provided ..

    (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

    Contact Us

    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.

    FAQ

    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.

    Picture
    12-48V 6006 Battery M-Series Disconnect Switch On Off for Power marine boat RV‘s

    6006 m-Series Battery Selector Switch Knob Marine Red

     

    Specifications:

    Material:ABS

    Color:Red

    Product type:6006

    Switch Type: Single Circuit ON-OFF

    Maximum Voltage: 48V DC

    Continuous Rating: 300A

    Intermittent Rating: 500A

    Cranking Rating 30 sec: 900A

    Terminal Stud Size: 3/8″ – 16 (M10)

    Switch Positions: 2

    Function: prevent electric leakage, protect power supply and safely cut off current

     

     

    Features:

    *Heavy duty

    Made of ABS plastic + Metal materials for safety use and avoiding short circuits of rear cover insulates terminals.

    *Operation

    On/Off 2 positions, 500A momentary rate

    *Compatible

    Used for DC 12-48V systems to isolate and secure the electrical system, can stand alone or be locked together with other switches.

    *Purpose

    Eliminate any power draw from the battery when the vehicle or boat is not in use, and disconnect the battery safely

    *Wide Application

    Widely used for Cars, Marine, Boats, RVs, Campers, Travel Trailer, Trucks, ATVs, UTVs, Battery banks, and other Devices

    *Super Safety

    Battery disconnect switch can disconnect the battery safely to eliminate any power draw from the battery when the vehicle or boat is not in use

    *Easy to Install

    The battery switch is super easy to install.

    *Advantages

    1. Tin-plated copper studs for maximum conductivity and corrosion resistance.

    2.Studs accept 3/8" (M10) ring terminals

    3.7/8" (22mm) stud length accepts multiple cable terminals.

    4. The one-piece terminal stud design will never loosen over time.

    5. Rated IP66 from water projected in powerful jets.

     

    Packaging include:

    Battery Selector Switch*1

     

    Item Specifics
    Material :ABS
    Brand :AUXITO
    Featured Refinements :Boat Switches
    Reference Number :6006
    Warranty :1 Year
    Color :Red
    Maximum Voltage :48V DC
    Continuous Rating :300A
    Intermittent Rating :500A
    Cranking Rating 30 sec :900A
    Terminal Stud Size ::3/8″ – 16 (M10)
    Switch Positions :2


    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

    (2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (3). Before payment,Please keep the consistency of Paypal address and ebay address.

    (4). Quantity orders are welcome!

    (1) All items will be shipped in 24 hours after receiving your payment .

    (2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    (2). All returned items should be in the original packaging , return tracking information should be provided ..

    (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.

    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.


    All rights reserved.