PRODUCT INFORMATION
AND PAYMENT AGREEMENT:
The buyer hereby
acknowledges that due to the nature of used auto parts, the product(s) listed
are sold as described to the best of our knowledge, and IWC make no
representation, certification nor warranty regarding mileage and its accuracy. You
acknowledge that you have done your research about the product(s), and you have
received all the information you requested from us prior to placing your order.
You acknowledge that you are buying a used product and you have full knowledge of
the potential for personal injury and property damage that might result from
it. You further acknowledge and agree that IWC shall have no liability
whatsoever for any consequences or incidental damages. While the merchandise of
IWC is in the possession of the purchaser, under no circumstance may a “STOP
PAYMENT” or “CHARGEBACK” be placed on the transaction. Only once the
merchandise has been returned to our establishment may a credit be issued to
the rightful cardholder.
WARRANTY AND
WARRANTY CLAIMS
Buyer acknowledges
that due to the nature of used auto parts, liability of IWC from all causes
shall be limited to the price paid for the goods sold or provided. If a part IWC
sold with a warranty fails to work during the stated warranty period, liability
shall be limited to the replacement of the part or a remedy not to exceed the
price IWC received for the part. Warranty does NOT cover labor, diagnostic,
towing or rental car costs
ALL WARRANTIES
SHALL BE NULL AND VOID IF:
The part IS TAMPERED
WITH, DISASSEMBLED OR MODIFIED without written authorization
The recipient vehicle is converted from a
private passenger use to commercial or fleet use, or is used for racing or
other competition or off-road recreational purposes.
The part’s failure
is caused by abuse, misuse, or modifications.
The part’s failure
is caused by using the part for any use other than what was intended or
recommended by the manufacturer.
The part fails or
becomes defective due to the vehicle being involved in a collision.
The part is
installed or operated outside the United States.
We do not offer or
cover any labor/installation or additional part charges obtained for any reason
The below
installation checklist is not followed accordingly.
IWC is not
responsible for injury or damage during or as a result of the installation of
our parts. TIMING BELTS/CHAINS, THERMOSTATS, SPARK PLUGS, FLUIDS AND SEALS ARE
ROUTINE MAINTENANCE ITEMS AND SHOULD BE REPLACED AT THE TIME OF INSTALLATION.
SHIPPING CLAIMS
Purchased item(s)
must be inspected immediately they are received, immediately notify us via email
or via eBay messaging if the item(s) were damaged at the time you received
them. All damage claims must be made within three days of receipt. Retain all
packing materials and shipping documents to help us investigate the cause of
the damage.
RECOMMENDED INSTALLATION
CHECKLIST FROM INDUSTRY LEADER:
ENGINE
Determine why the
original engine failure occurred and make appropriate repairs BEFORE INSTALLING
A NEW ENGINE.
Ensure this engine
you are purchasing is the same application as the one being replaced.
Clear all computer
diagnostic codes from the vehicle prior to installing.
Exchange the oil
pan and pick-up tube.
Inspect and
replace gaskets & seals (front seal, rear main seal, valve cover gaskets,
oil pan gaskets).
All crankshaft
bolts that are drilled through sealant must be applied to avoid leaks.
Install new
thermostat & gasket (warranty will be void if engine heat tab is melted or
removed)
Replace the timing
belt and water pump and Install replacement sparkplugs & wires.
Exchange attached
accessory items to insure proper fit (mounts, intake manifold, exhaust
manifold, distributor, sensors).
Disable
fuel/ignition before attempting to start engine. This will allow the oil to
prime as indicated by the manufacturer.
Replace engine
oil, oil filter, air filter, fuel filters, coolant-antifreeze.
Drain excess oil
and coolant from exhaust system.
If equipped with
an engine oil cooler the radiator or external cooler must be replaced.
Ensure the cooling
system is flushed and functioning properly.
TRANSMISSION
Determine why the
original transmission failure occurred and make appropriate repairs
Ensure the purchased
transmission is materially the same as the one to be replaced
Remove oil pan and
replace filter, remove torque converter strap and replace front seal.
Properly install
and index the torque converter completely into the front pump.
Inspect and
replace rear seal as needed, and change over sensors as needed.
Flush the
transmission cooler lines and radiator with a power flush machine or with an
aerosol 'Cooler Flush Kit'. This will ensure the cooling system is flowing.
Replace the
radiator or cooler if recommended by the manufacturer.
Clear all
transmission computer codes in the vehicle prior to starting or operating.
Fill the
transmission with the OEM recommended fluids.
Verify the
differential portion of the transmission is full of fluid.
Most 4WD &
some 2WD vehicles must re-learn the shift logic to the transmission after
installation. You may verify with your local dealer if a re-learn is required
for your vehicle. Service is not reimbursable.
RETURN POLICY
Unit must be
returned in the same condition it was shipped, complete & whole as shipped
without missing parts, within the specified duration (30 or 60 days) on the
listing. Final sale items (20% or more), are not eligible for return. Buyer pays
for return shipping; restocking & shipping fees may apply.
MORE PRODUCT
INFORMATION
The ENGINE OR
TRANSMISSION you will be receiving from us may or may NOT include some
additional accessories and extra parts. If included, these parts are sold AS-IS
with NO WARRANTY and were included to help protect the engine during storage
and shipping. Examples of these non-warranty parts include switches, sensors,
cables, coils, wires, injectors, electronics, belts (including timing
belt/chain), hoses, water pumps, brackets, intake/exhaust manifolds, oil pans
and turbos/superchargers (if equipped). To aid in installation, your current
engine and all attached accessories are to be kept except if they’re damaged in
which case you are required to replace them.
The installer responsible
for replacing the radiator or transmission oil cooler, flush the transmission
oil cooling lines, fill differential, adjust shifter mechanisms, replace
external switches sensors & solenoids, replace all filters, replace all
seals, replace pan gaskets and Relearn, Reset or Replace computers and clear
all codes when installing a transmission. Re-learning or resetting the
Transmission to the vehicle may involve towing (Not Driving) to a dealership of
same manufacturer in order to be performed. In certain types of Transmissions,
the TCM (transmission controlling computer) is incorporated with the Valve body
which may require the valve body to be replaced. Transfer cases are not
included with transmission from AWD automobiles.
FLAT RATE FREIGHT SHIPPING
POLICY
Flat rate freights
are only to business addresses or closest freight terminal pickup only, NO
RESIDENTIAL DELIVERY for freights. If you wish to pick up your order from the
closest freight terminal, contact us first before making your purchase, so we
can provide you the address of the closest freight terminal, because you will
need to use the address of the freight terminal as your shipping address during
payment, if you wish to pick it up from the terminal. Flat rate freight does
not include HI, PR and AK, WA, contact us first for freight quote if you are
buying from these locations.
*** By bidding, purchasing
or accepting delivery of a used automobile part purchased from IWC, buyer accepts
and agrees to all of the terms and conditions included on this listing, as well
as eBay’s market place policies ***