Gas Engine Motor 80cc 2-Stroke for Motorized Motorised Bicycle Bike Cycle Black

Remarks: New engines generally require a running-in period of more than 500 kilometers, and the same is true for damaged cylinders and piston rings that need to be updated. In the running-in phase, the vehicle speed should not exceed 20km/h, and the engine should not bear excessive load. Otherwise it will cause the engine to overheat, jam the cylinder, and accelerate the wear of the parts.

Fuel and oil mixing ratio: 18:1 for new cars (30:1 after 500 kilometers)(this machine is a two-stroke gasoline engine with crankcase scavenging. The lubrication of the cylinder and the transmission parts in the crankcase depends on the fuel system. Therefore, the machine uses Fuel is a mixture of gasoline and lubricating oil. Before the fuel is poured into the fuel tank, pour gasoline and gasoline engine oil into the container according to a certain volume ratio, and mix them before use. Pour into the fuel tank. Do not pour the two oils in sequence. Into the fuel tank.)

Product parameters:

Product size: 26X13X26cm (10.24*5.12*10.24inch)

Net weight: 5.5KG (12.13lb)

Rated power: 1.65kw

Speed: 5500r/min

Maximum power: 2.94kw

Maximum speed: 6500r/min

 Ignition method: electronic ignition

Spark plug model: Z4C

Model: single cylinder, air-cooled, two-stroke

Stroke: 40mm

Lubricant: Two-stroke gasoline engine oil

Fuel tank capacity: 3L

Fuel consumption: 3L/100 kilometers

Clutch form: friction block, dry type

Start mode: pull start

Cooling method: natural air cooling

Variable speed mode: two-stage transmission variable speed

Speed ​​limit: 24km/h

Displacement: 80cc

Product Features:

100% brand new and high quality

One-piece balanced crank, stroke 38mm

The hardware used to install the bolts is much thicker

Head tilt-greater clearance and higher compression hardware

Higher power and longer service life

Fully assembled 80CC two-stroke engine

Incomplete engine only

Packing List:

only 1 bicycle engine (not complete package)