Important Notes
Important Safety Advisory
As with any component you purchase for your vehicle, installation should be done by a qualified technician. We've provided the following information as a general
reference for purchasing and installing these spacers/adapters. The following list isn't all-inclusive and may be different depending on the vehicle you drive,
type of wheels you have, and ideal setup you're trying to achieve. Failure to install properly may cause your lug nuts/wheel studs/spacers to loosen or break while
driving. If you are not confident or familiar with the installation, please ask a trained professional for help.
Before Purchasing
- Required that proper measurements are taken to ensure that by adding this spacer, the wheel/tire won't hit the fender or any other part of the vehicle.
- The vehicle’s wheel studs need to be measured. If the OEM studs are longer than 1.25" (32mm), it will extend past the spacer's surface. It may not be
possible to bolt the wheel safely onto the spacer, depending on whether your wheels have pockets/cavities around the mounting pad.
Before Installation
Check compatibility of spacer-to-hub, spacer-to-wheel, and lug nuts (thread pitch & seat type)
During Installation
- Installation should be performed by a trained professional using proper tools.
- Avoid using an impact wrench or any pneumatic tools; improper usage may cause damage to components.
- Ensure proper thread engagement. Typically, its a minimum of 5-8 turns before the lug nut tightens, however, it varies depending on thread pitch and type of vehicle.
- ALL Lug nuts MUST be torqued to manufacture specifications.
After Installation
- Test drive your vehicle to ensure the hardware is installed properly. Pay close attention for any noises, vibrations, or compatibility issues (such as fender rubbing).
- Inspect and re-torque ALL lug nuts after 25-50 miles of driving
Note: No returns or exchanges once product has been installed on the vehicle.
Legal Information
Note: This is an aftermarket component. The trademarks used in this listing are registered trademarks of their respective owners, and are used only to identify the vehicles to which this part fits.
