Semi Auto Lifan 4 Stroke 125cc Engine Motor Kit For Honda CT90 CRF50 XR70 Trail

Product Description

International customers are responsible for tax/duty fee, shipping fee is not refundable once shipment leave our facility
This Motor should fit the following models:
Note: This is not a guarantee, if you are unsure, please check with your local dealer.

HONDA CRF50 / CRF70 / XR50 / XR70 / Z50 / Z50R / CT70 Mini Trail / Z50 / Minitrail Monkey / XL70 ST70 / QA50 / QR50 / CL70 / SL70 / 70 Passport / CS 90 / SL 90 / ZB 50 /

 Due to the fact that this is a racing engine, no warranty is  implied. We have not had a single problem with the engine.

Specifications:

   Type: 1-cylinder, horizontal, 4-stroke, air-cooled electric and kick start
   Bore x Stroke: 52.4mm x 55.5mm
   Displacement: 120ml
   Max. Power & Corresponding Speed: 5.8KW/7500rpm±375rpm
   Max. Torque & Corresponding Speed: 8.5N.m/5000rpm±250rpm  
   Min. Fuel Consumption: <367g/KW.h
  Pollutant Index: =5.5 g/km (CO), =1.2g/km (HC) 0.23g/km(NOx)
  Clutch Type: Centrifugal friction clutch   Semi Auto
 Start Mode: electric or kick start
 Compression: 9.0:10
 Gear ratio: 2.833/1.706/1.238/0.958
 Ignition type and spark plug model: CDI, A7TC

 Advance angle of ignition: 15°±1°/1500r/min
 Starting performance: ?15s
 Valve clearance? 0.05mm
 Carburetor type: PZ22
 Total lubricating oil capacity: 900mL
 Lubricating mode and type of lubricating oil pump: pressure and Splash, Internal and external rotor type
 Dimensions: 470×275×280mm (18.5x10.8x11 inch)

 Engine Oil: 900ml, 15W/40-SE, 4 stroke
 Gears:  0-1-2-3-4    4 Up

 Sprocket: 15T 428 CHAIN  20mm
 Shaft: 20mm
 Weight: 23kg


LISTING INCLUDING

    1 x LIFAN 125CC 1P52FMI-C ENGINE
    1 x Kick Starter Lever
    1 x Gear Shift Lever

    1 x Manifold set Package
    1x PZ22 carburetor
   1x Air filter
   1x 428 chain
  1x 428 41 teeth 76mm chain sprocket
  1x Exhaust pipe
  1x wiring harness
  1x throttle cable  with grips
  1x 12v 6ah battery
   
Instructions:
1.Check the oil level with a dipstick. If the oil level is lower than the lower cut line of the dipstick, add lubricating oil to the upper cut line .
2. Do not increase the load in the cooling machine, must preheat the engine 1 to 3 minutes in advance.
3. The break-in of the engine is very important. In a new engine within 650miles, the throttle should never be fully open and the gear should be changed at any time.Poor break-in leads to more faults. During break-in, the engine oil should be changed every 185 miles or so;After travelling 210 miles, an adjustment should be made to compensate for the slight wear during the break-in period, so as to ensure the good performance of the engine and extend its service life.For specific break-in requirements, refer to the instructions.
4. Idle adjustment
(1) Twist the idle screw clockwise completely into place, and then reverse 1 5/8 turn.
(2) Preheat the starting engine to the working temperature, and adjust the idle speed to 1500r/min±100r/min with the fixing screw of the oil door plunger.
(3) Then turn the idle fine-tuning screw to achieve the maximum steady speed of the engine, and then re-adjust the locking screw with the oil door plunger to the specified 1500r/min±100r/min.
5. Use of electric starting:
It is advisable to use electric starting in neutral.If electric starting is used in other gears, braking must be applied simultaneously.
If the battery power is not enough, just drive a few miles battery after automatic charging, can be used.
*Compatible table only for reference.

Please be aware that the vehicle compatibility list may not be 100% accurate. However, the OE number provided in our listing is. Match the result with the OE number we have in the listing that would be the best way to guarantee fitment.

 

Before Purchasing, please carefully check the OEM part number and illustrations to make sure it is compatible with your model. If you are not sure, please feel free to contact us. We are always here to solve any problems you may encounter, and we'll reply you as soon as possible.

 

Then, if you have any problems after purchasing, please contact us before opening a return or case. We will do our best to provide you with the best solution. Thanks for your understanding.

 

If you have questions about payment methods, please contact us by email .

Usually we have 3 days to process after you placed an order and we received your payment, and send ship the goods within 3 days, iyou don’t get the tracking number after 3 days, 

please contact us by email.

 

We only accept address in EnglishPlease ensure your order Address and Post code are correct  . We will sent out as per your address  . 

 

Usually we will ship out by Expedited Shipping including DHL,TNTUPSFEDEX, or EMS. Delivery is any day from 5-7 business days (Monday through Friday, excluding 

weekends and holidays)


We understand that you sometimes need to return or exchange goods. If the product you received is not the one you needed, pleas contact us directly and send us a right photo ; 

Logistics claims receipt of the product must be submitted within 30 days . If it is more than 30 days, we will no longer provide return service

As an international supplier of automatic transmission parts, YG Group insists on using original parts to ensure original quality and reduce maintenance costs
Create higher value for customers. The current TRANSPEED product categories include: retrofit kits, filters, clutch assemblies, clutch bushings, T.C oil seals, rubber rings, shafts,
Bushings, electromagnets, valve bodies, pumps, etc. The TRANSPEED brand has established a good business reputation and has been recognized and favored by the industry. Its products have always been hot
Sold to China and all over the world.