• Fits:
  •  
  • 2010-2012 Hyundai Santa Fe
    2011-2013 Kia Sorento
  •  
  • Features:
  •  
  • Easy Installation
  • High flow design provides long lasting, efficient cooling Factory lubricated for long life Precision ground shaft and hub accept fan clutches perfectly Quality forged housing is specially formed to ensure maximum coolant flow Precision built and balanced - Pressed on impeller increases water flow Unitized seal protects bearings - Provides long life and leak free performance
  • Engine Radiator And Cooling Fan Kit For 10-12 Hyundai Santa Fe 11-13 Kia Sorento

    Fits:

     

    2010-2012 Hyundai Santa Fe
    2011-2013 Kia Sorento

     

    Features:

     

    Easy Installation

    High flow design provides long lasting, efficient cooling
    Factory lubricated for long life
    Precision ground shaft and hub accept fan clutches perfectly
    Quality forged housing is specially formed to ensure maximum coolant flow
    Precision built and balanced - Pressed on impeller increases water flow
    Unitized seal protects bearings - Provides long life and leak free performance

    The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.

     

    Note:

    It is recommended to replace your Radiator Fan Clutch & Water Pump at the same time. The two parts age at the same rate so if one has failed, the other is probably not far behind. The fan clutch and water pump are also connected by the same shaft. When one part fails it typically affects the operation of the other. To prevent premature failure of your new unit, it is wise to replace both at the same time.

     

    Radiator Notes:

    Specification:

    Core Material: Aluminum

    Tank Material: Plastic

    Quantity: 1pcs Radiator

    Warranty:1 Year limited

    Direct Replacement

    100% brand new radiator (as picture showed)

    --------------------------------------------

    ? Installation guidelines provided in the box

    ? Premium OE hardware and fittings included in every box

    ? OE design to ensure exact fit, form and function for an easy drop-in installation

    ? Maximum cooling efficiency and perfect fit

    ? Leak-tested aftermarket radiator

    ? SO 9001 certified manufacturing plants

     

    How to replace a new radiator?

    1. Disconnect the battery.

    2. Drain the radiator fluid into a suitable container.

    3. Remove the old radiator:

    -Take off any plastic covers around the radiator.

    -Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.

    -Disconnect the radiator hoses from the radiator.

    -Disconnect the transmission cooling lines from the bottom of the radiator.

    -Remove any clamps, brackets, or screws holding the radiator inside its frame.

    -Lift the radiator up and out of the car.

    4. Install the new radiator:

    -Slide the new radiator into place.

    -Connect any clamps or brackets that hold the radiator in place.

    -Connect the transmission cooling lines carefully.

    -Connect the engine cooling hoses to the radiator.

    -Replace the fan and fan shroud.

    -Reconnect the fan electrical connection.

    -Replace the plastic covers.

    5. Fill the radiator with fluid.

    6. Check your work to make sure that there are no leaks.

    (Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)

    Note:Do please keep children and pets away when replacing the radiator)

    -----------------------------------------------------------------------------

    Attention:

    ? project operation, the vehicle normal temperature 60 to 80 degrees.

    ? add detergent if the tank is too full can take some antifreeze.

     


    Item Specifics
    Manufacturer Part Number IG844115CO
    Brand Ignition
    Fitment Type Direct Replacement
    Warranty 1 Year
    Condition New
    Custom Bundle No
    Radiator Placement on Vehicle Front
    Type Radiator and Cooling Fan
    Interchange Part Number Radiator and Cooling Fan,Hyundai Santa Fe
    Other Part Number Electric Radiator Cooling Fan,Kia Sorento
    Superseded Part Number Radiator Cooling Fan
    Listing Include 1X Radiator,1X Cooling Fan
    Voltage 12V
    Radiator Core Material Aluminum
    Radiator Tank Material) Plastic
    Fan Placement on Vehicle Driver Side/LH
    Cooling Fan Type Radiator Cooling Fan Assembly,Single Fan

    Shipping
     

    ​We usually ship within 1 business day of receiving your payment.

    ​We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.

    ​We only ship to Paypal confirmed address, please make sure that the address is correct before you check out.

     
    ▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the    shipment and get   back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification. 
     
    ▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address. 
     
    ▪ The images shown are not the actual item and are for your reference only. 
     
    ▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary,    particularly during   the holiday season. 
     
    ▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the    shipment and get   back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification. 
     
    ▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address. 
     
    ▪ The images shown are not the actual item and are for your reference only. 
     
    ▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary,    particularly during   the holiday season. 
     
    ▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the    shipment and get   back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Payment

    We accept to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods, please kindly check Paypal for more information.

    For multiple purchases, please add items to your Ebay shopping cart and pay once for entire order.

    Return

    We offer a 30-day money-back guarantee, as long as the item has not been installed on a vehicle and in the same condition when purchased. 

    The process for returns: 

    1. Contact us via eBay with any concerns or issues with the product you received.

    2. Begin a Return Request on your eBay account. 

    3. You will be sent a return label via eBay

    Feedback

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!As a seller Positive Feedback is very important to us, as well as ourcustomers. We hope that you contact us immediately BEFORE you give  us neutral or negative feedback, so that   we can satisfactorily address your concerns.

    Warning

    Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Store Cat.
    Engine Radiator And Cooling Fan Kit For 10-12 Hyundai Santa Fe 11-13 Kia Sorento

    Fits:

     

    2010-2012 Hyundai Santa Fe
    2011-2013 Kia Sorento

     

    Features:

     

    Easy Installation

    High flow design provides long lasting, efficient cooling
    Factory lubricated for long life
    Precision ground shaft and hub accept fan clutches perfectly
    Quality forged housing is specially formed to ensure maximum coolant flow
    Precision built and balanced - Pressed on impeller increases water flow
    Unitized seal protects bearings - Provides long life and leak free performance

    The radiator cooling fan is an integral part of your car that is responsible for cooling the radiator of your car. The radiator cooling fan does this by either pulling or pushing air into the radiator keeping the radiator temperatures within the safe levels. A damaged radiator cooling fan is a determining factor in preventing your car from overheating. Below are the materials that you need along with the instructions on how to replace a radiator cooling fan.

     

    Note:

    It is recommended to replace your Radiator Fan Clutch & Water Pump at the same time. The two parts age at the same rate so if one has failed, the other is probably not far behind. The fan clutch and water pump are also connected by the same shaft. When one part fails it typically affects the operation of the other. To prevent premature failure of your new unit, it is wise to replace both at the same time.

     

    Radiator Notes:

    Specification:

    Core Material: Aluminum

    Tank Material: Plastic

    Quantity: 1pcs Radiator

    Warranty:1 Year limited

    Direct Replacement

    100% brand new radiator (as picture showed)

    --------------------------------------------

    ? Installation guidelines provided in the box

    ? Premium OE hardware and fittings included in every box

    ? OE design to ensure exact fit, form and function for an easy drop-in installation

    ? Maximum cooling efficiency and perfect fit

    ? Leak-tested aftermarket radiator

    ? SO 9001 certified manufacturing plants

     

    How to replace a new radiator?

    1. Disconnect the battery.

    2. Drain the radiator fluid into a suitable container.

    3. Remove the old radiator:

    -Take off any plastic covers around the radiator.

    -Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.

    -Disconnect the radiator hoses from the radiator.

    -Disconnect the transmission cooling lines from the bottom of the radiator.

    -Remove any clamps, brackets, or screws holding the radiator inside its frame.

    -Lift the radiator up and out of the car.

    4. Install the new radiator:

    -Slide the new radiator into place.

    -Connect any clamps or brackets that hold the radiator in place.

    -Connect the transmission cooling lines carefully.

    -Connect the engine cooling hoses to the radiator.

    -Replace the fan and fan shroud.

    -Reconnect the fan electrical connection.

    -Replace the plastic covers.

    5. Fill the radiator with fluid.

    6. Check your work to make sure that there are no leaks.

    (Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)

    Note:Do please keep children and pets away when replacing the radiator)

    -----------------------------------------------------------------------------

    Attention:

    ? project operation, the vehicle normal temperature 60 to 80 degrees.

    ? add detergent if the tank is too full can take some antifreeze.

     


    Shipping
     

    ​We usually ship within 1 business day of receiving your payment.

    ​We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.

    ​We only ship to Paypal confirmed address, please make sure that the address is correct before you check out.

     
    ▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the    shipment and get   back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification. 
     
    ▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address. 
     
    ▪ The images shown are not the actual item and are for your reference only. 
     
    ▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary,    particularly during   the holiday season. 
     
    ▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the    shipment and get   back to you as soon as possible with a reply. Our goal is customer satisfaction!▪ Orders processed within 24-48 hours of payment verification. 
     
    ▪ We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address. 
     
    ▪ The images shown are not the actual item and are for your reference only. 
     
    ▪ Service transit time is provided by the carrier and excludes weekends and holidays. Transit times may vary,    particularly during   the holiday season. 
     
    ▪ If you have not received your shipment within 30 days from payment , please contact us. We will track the    shipment and get   back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Payment

    We accept to pay by Credit Card, Direct Debit, VISA, eCheck, or other methods, please kindly check Paypal for more information.

    For multiple purchases, please add items to your Ebay shopping cart and pay once for entire order.

    Return

    We offer a 30-day money-back guarantee, as long as the item has not been installed on a vehicle and in the same condition when purchased. 

    The process for returns: 

    1. Contact us via eBay with any concerns or issues with the product you received.

    2. Begin a Return Request on your eBay account. 

    3. You will be sent a return label via eBay

    Feedback

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!As a seller Positive Feedback is very important to us, as well as ourcustomers. We hope that you contact us immediately BEFORE you give  us neutral or negative feedback, so that   we can satisfactorily address your concerns.

    Warning

    Cancer and Reproductive Harm - www.P65Warnings.ca.gov


    Copyright of VAP-AutoParts. All rights reserved.