Gas Engine Motor 80cc 2-Stroke for Motorized Motorised Bicycle Bike Cycle Black
Remarks: New engines generally require a running-in period of more than 500 kilometers, and the same is true for damaged cylinders and piston rings that need to be updated. In the running-in phase, the vehicle speed should not exceed 20km/h, and the engine should not bear excessive load. Otherwise it will cause the engine to overheat, jam the cylinder, and accelerate the wear of the parts.
Fuel and oil mixing ratio: 18:1 for new cars (30:1 after 500 kilometers)(this machine is a two-stroke gasoline engine with crankcase scavenging. The lubrication of the cylinder and the transmission parts in the crankcase depends on the fuel system. Therefore, the machine uses Fuel is a mixture of gasoline and lubricating oil. Before the fuel is poured into the fuel tank, pour gasoline and gasoline engine oil into the container according to a certain volume ratio, and mix them before use. Pour into the fuel tank. Do not pour the two oils in sequence. Into the fuel tank.)
Product parameters:
Product size: 26X13X26cm (10.24*5.12*10.24inch)
Net weight: 5.5KG (12.13lb)
Rated power: 1.65kw
Speed: 5500r/min
Maximum power: 2.94kw
Maximum speed: 6500r/min
Ignition method: electronic ignition
Spark plug model: Z4C
Model: single cylinder, air-cooled, two-stroke
Stroke: 40mm
Lubricant: Two-stroke gasoline engine oil
Fuel tank capacity: 3L
Fuel consumption: 3L/100 kilometers
Clutch form: friction block, dry type
Start mode: pull start
Cooling method: natural air cooling
Variable speed mode: two-stage transmission variable speed
Speed limit: 24km/h
Displacement: 80cc
product features:
100% brand new and high quality
One-piece balanced crank, stroke 38mm
The hardware used to install the bolts is much thicker
Head tilt-greater clearance and higher compression hardware
Higher power and longer service life
80CC two-stroke engine
Incomplete engine only
Packing list:
only 1 bicycle engine (not complete package)