TECHNICAL CHARACTERISTICS - FLIS
--------------------------------
NSN:         6105-00-068-8502                INC: 19258               FIIG: A271A0
ITEM NAME:   MOTOR,CONTROL
DEFINITION:  A motor which is designed to be operated from two independent voltage
             sources, in such a way that variations in one voltage source will
             determine the direction and speed of the motor. In the alternating
             current type the voltages are usually applied to a split-phase stator,
             whereas in the direct current type, one voltage is applied to the
             stator and the other to the armature. Low inertia and rapid
             reversibility are inherent characteristics of this type of motor. See
             also SERVOMOTOR, AUTOMATIC PILOT.
             

CHARACTERISTIC                          VALUE
OVERALL LENGTH                          3.287 INCHES                                      
OVERALL WIDTH                           1.437 INCHES                                      
SHAFT DIAMETER                          0.0786 INCHES NOMINAL SINGLE END                  
CURRENT TYPE                            AC INPUT                                          
TEETH QUANTITY                          15 SINGLE END                                     
INCLOSURE FEATURE                       TOTALLY INCLOSED                                  
MOUNTING METHOD                         CLAMP RING                                        
MOUNTING FACILITY TYPE AND              1 CLAMP COLLAR                                    
QUANTITY                                                                                  
COOLING METHOD                          NATURAL CONVECTION VENTILATED                     
CONTROL FIELD CURRENT                   0.001                                             
RATING IN AMPS                                                                            
CONTROL FIELD IMPEDANCE                 102.0                                             
RATING IN OHMS                                                                            
CONTROL FIELD WINDING TYPE              SINGLE WINDING W/CENTER TAP                       
CURRENT RATING METHOD                   LOCKED ROTOR                                      
TORQUE RATING AND TYPE                  1.45 INCH-OUNCES STALLED                          
INCLOSURE SPECIFICATION                 COMMERCIAL                                        
CONTROL FIELD VOLTAGE TYPE              36.0 AC                                           
AND RATING IN VOLTS                                                                       
FEATURES PROVIDED                       VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING
                                        POSITION                                          
LENGTH OF SHAFT FROM                    0.337 INCHES SINGLE END                           
HOUSING                                                                                   
TEMP RATING                             -54.0 OPERATING DEG CELSIUS AND 125.0 OPERATING   
                                        DEG CELSIUS                                       
ROTOR SPEED RATING IN RPM               4500.0 SINGLE NO LOAD                             
CURRENT RATING IN AMPS                  0.220 SINGLE INPUT                                
CONNECTION TYPE AND VOLTAGE             115.0 LINE TO NEUTRAL SINGLE INPUT                
RATING IN VOLTS                                                                           
SHAFT END CHARACTERISTIC                A17 SINGLE STYLE SINGLE END                       
PHASE                                   SINGLE INPUT                                      
FREQUENCY IN HERTZ                      400.0 INPUT                                       
TEST DATA DOCUMENT                      10001-2245876 DRAWING (THIS IS THE BASIC GOVERNING
                                        DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL   
                                        EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY
                                        SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY
                                        BE REFERENCED IN A BASIC GOVERNING DRAWING)       
TERMINAL TYPE AND QUANTITY              5 WIRE LEAD