East-auto
Your best choice
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Product description
-Fitment:
For Mercury 1996-2007 30-300HP
For Force 1996-1999 40,50,75,90 & 120HP
-Type:
Outboard Ignition Coil
-Part Numbers：
114-7509 827509A1
827509A3 827509A4
827509A7 827509A8
827509A9 827509A10
827509T7 AMW-3454
827509T4
-NOTE:
-Please be very careful to check our photos, make sure the photos showed is the same as you wanted!
-Please make sure the interchange part number matches the part you are replacing.
-Package Include:
·1 * CDM Ignition Coil
How to install ignition CDM module 114-7509?
1. Disconnect and clean all engine and battery ground wires.
2. Disconnect the old CDM Module and remove the high tension coil wire from the spark plug.
3. Unbolt and remove the old CDM Module. (Note the direction of the spark plug wire).
4. Check for dc voltage on the kill (stop) wires (usually black/Yellow) with the key switch in the on and off position.
5. Apply a slight amount of dielectric grease to the seal area of the wire connector from the engine harness.
6. Apply a slight amount of dielectric grease to the outside of the new spark plug wire and thread the spark plug wire into the new CDM Mod.
7. Bolt the new CDM Module onto the engine(orient the new CDM Module so that the spark plug wire is pointed in the same direction as the original).
8. Plug in the connector from the wire harness into the new CDM Module and connect the spark plug wire to the spark plug.
| Item Specifics | |
|---|---|
| Brand | East-auto |
| Manufacturer Part Number | 114-7509 827509T7 827509A10 |
| Fitment | For Mercury (1996-2007 (30-300HP) |
| Fitment1 | For Force (1996-1999 (40,50,75,90 & 120HP) |
| Interchange Part Number | 114-7509,827509A1,827509A3,827509A4 |
| Other Part Number | 827509A7,827509A8,827509A9 |
| Type | Outboard Ignition Coil |
| Replaces Part Number | 827509A7, 827509A9, 827509A10, 827509T4 |
| Superseded Part Number | 827509A10,827509T7 ,AMW-3454 |
| Warranty | 90 Day |
We process and dispatch your purchase within 3 business day after payment clearance.
Please contact us if you have special requirements (combination of packaging etc.).
We offer free UPS Fedex from New Jersey.
Please contact us first when return, exchange and refund is required. Any direct return of purchased items will not be processed.
Buyer is responsible for the return cost.
Change-of-mind return can only be accepted within 8 days after purchase. All other returns can be accepted in 30days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Before leaving us neutral or negative feedback, please contact us first. We will do everything we can to give you a satisfying solution.
Please don't open case via ebay or paypal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn't get things solved. So please talk with us and we will not let you down.
Good quality, good operation.
Comes in a sealed package, ready to install.
East-auto
Your best choice
114-7509 CDM Ignition Coil For 827509T7 827509A9 Mercury MerCruiser Engine
Product description
-Fitment: For Mercury 1996-2007 30-300HP For Force 1996-1999 40,50,75,90 & 120HP
-Type: Outboard Ignition Coil
-Part Numbers： 114-7509 827509A1 827509A3 827509A4 827509A7 827509A8 827509A9 827509A10 827509T7 AMW-3454 827509T4
-NOTE: -Please be very careful to check our photos, make sure the photos showed is the same as you wanted! -Please make sure the interchange part number matches the part you are replacing.
-Package Include: ·1 * CDM Ignition Coil
How to install ignition CDM module 114-7509? 1. Disconnect and clean all engine and battery ground wires. 2. Disconnect the old CDM Module and remove the high tension coil wire from the spark plug. 3. Unbolt and remove the old CDM Module. (Note the direction of the spark plug wire). 4. Check for dc voltage on the kill (stop) wires (usually black/Yellow) with the key switch in the on and off position. 5. Apply a slight amount of dielectric grease to the seal area of the wire connector from the engine harness. 6. Apply a slight amount of dielectric grease to the outside of the new spark plug wire and thread the spark plug wire into the new CDM Mod. 7. Bolt the new CDM Module onto the engine(orient the new CDM Module so that the spark plug wire is pointed in the same direction as the original). 8. Plug in the connector from the wire harness into the new CDM Module and connect the spark plug wire to the spark plug.
Payment
Shipping
We process and dispatch your purchase within 3 business day after payment clearance. Please contact us if you have special requirements (combination of packaging etc.). We offer free UPS Fedex from New Jersey. Returns
Please contact us first when return, exchange and refund is required. Any direct return of purchased items will not be processed. Buyer is responsible for the return cost. Change-of-mind return can only be accepted within 8 days after purchase. All other returns can be accepted in 30days. We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions. Contact Us
Before leaving us neutral or negative feedback, please contact us first. We will do everything we can to give you a satisfying solution. Please don't open case via ebay or paypal. Please don't open any return request before contact us. We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn't get things solved. So please talk with us and we will not let you down. Features
Good quality, good operation. Comes in a sealed package, ready to install. |
|||||||||||||||||||||||||||||||||||||
