Front Wheel Bearing Hub Assembly Set of 2 Driver and Passenger Side
| Qty. | Part | Description |
|---|---|---|
| 2 | HB615080 | Wheel Hub Bearing Assemblies |
Make Model Year Notes Position Ford Explorer 2006 - 2010 All Trim Levels Front Ford Explorer Sport Trac 2007 - 2010 All Trim Levels Front Mercury Mountaineer 2006 - 2010 All Trim Levels Front Weight 22 lbs Height 6.7 in Width 6.7 in Length 11.8 in ABS Sensor Included Yes Anti Lock Braking System Yes Anti Lock Braking System Type Cable Bearing Generation G3 Bolt Circle Diameter 4.5 in. / 114.3 mm Bolt Pattern 5 x 4.5 in. Bolt Size 1/2*20UNF Bolt Thread Pitch 1/2'-20UNF Brake Pilot Diameter 3.22 in. / 81.9 mm C-Clip Included No Fitment Type Direct Replacement Flange Bolt Hole Quantity 3 Flange Diameter 6.3 in. / 160 mm Flange Offset 1.91 in. / 48.4 mm Flange Shape Triangle Hardware Included No Hub Pilot Diameter 3.35 in. / 85 mm Inside Spline Quantity 27 ISO Specification ISO 16949 Items Included N/A Knuckle Bolt Circle Diameter 4.75 in. / 120.6 mm Knuckle Bolt Hole Size M12*1.75 Lugs Included Yes Material Steel Surface Finish Polished, Rust Protected Type Tapered Bearing Wheel Lug Quantity 5 Wheel Pilot Diameter 2.77 in. / 70.4 mm California Proposition 65 Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Wheel Hub Bearing Assemblies
Distributed by AutoShack- ISO / IATF 16949 certified, direct fit and made from high quality materials to meet orginal specifications
- Coated with an anti-corrosion finish to provide a longer life
- Anti-lock braking system (ABS) tested during assembly to ensure safe and optimal function
- High quality seal design protects against water damage and contamination
- Designed to fit your specific vehicle - no modification required
Wheel hub bearings support the weight of a vehicle and enable wheels to rotate smoothly, making them a critical component of a vehicle's wheel assembly. Operating a vehicle with a faulty hub bearing compromises the entire wheel assembly, which reduces brake performance and puts you at risk of losing control of your vehicle.
Hub bearings should always be replaced in pairs (front or rear). This reduces the overall time required to replace two parts at different times. In most cases, if one fails the other is close behind.
This part must be torqued to vehicle specifications to prevent failure.
Please note product bundle will ship in multiple packages with separate individual tracking numbers.
Professional Installation is Highly Recommended.