AMT0006 Outboard Trim/Tilt Pin Wrench 32mm x 4.5/4mm forYamaha Suzuki Johnson



  •  Application - Trim Caps on ALL SHOWA manufactured Trim/Tilt Units for Yamaha ,Evinrude, for Honda
  • High Quality Material--Our pin wrench has a 200 ft-lb MIN Pin Strength, Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use. High precision and hardness ensure long-term service.
  • Function--To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder

  • A Must Have--Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease

    •  

     

     

      

    Trim/Tilt Pin Wrench AMT0006-32mm x 4.5/4mm Remove Trim/Tilt Caps on Hydraulic Cylinders for Yamaha, Suzuki, Johnson, Evinrude, for Honda Outboards        1

    Features

    • Durable
    • stainless
    • Easy to use
    • Long use time
    • Used multiple times

    AMT0006-32mm x 4mm Trim&Tilt Pin Wrench

    High quality material

    We use high-quality hard steel. The minimum pin strength of our pin wrench is 200 foot pounds, so we are not afraid of breaking or breaking during work.

    4 x 4.0mm pins , 4 x 4.5mm pins.

    The 8 pins of our products are detachable to meet people's different size requirements. In particular, the 4 pins can be engaged with the bottle cap and prevent breakage. The precise hole position can work perfectly. 



















                                            

  •  Application - Trim Caps on ALL SHOWA manufactured Trim/Tilt Units for Yamaha ,Evinrude, for Honda
  • High Quality Material--Our pin wrench has a 200 ft-lb MIN Pin Strength, Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use. High precision and hardness ensure long-term service.
  • Function--To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder

  • A Must Have--Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease

    •  

     

     

      

    Trim/Tilt Pin Wrench AMT0006-32mm x 4.5/4mm Remove Trim/Tilt Caps on Hydraulic Cylinders for Yamaha, Suzuki, Johnson, Evinrude, for Honda Outboards        1

    Features

    • Durable
    • stainless
    • Easy to use
    • Long use time
    • Used multiple times

    AMT0006-32mm x 4mm Trim&Tilt Pin Wrench

    High quality material

    We use high-quality hard steel. The minimum pin strength of our pin wrench is 200 foot pounds, so we are not afraid of breaking or breaking during work.

    4 x 4.0mm pins , 4 x 4.5mm pins.

    The 8 pins of our products are detachable to meet people's different size requirements. In particular, the 4 pins can be engaged with the bottle cap and prevent breakage. The precise hole position can work perfectly. 

    ibay365