• Valve Cover Gaskets Seals Fit For Nissan Altima,Juke,Rogue, etc
  •  
  • Fits for:
  • 2019 Nissan Altima; Edition ONE, Platinum, SR; 2.0L L4 – Gas
  • 2017 Nissan Juke; S, SV, Nismo, SL, Nismo RS; 1.6L L4 - Gas
  • 2013 Nissan NV200; S, SV; 2.0L L4 - Gas
  • 2014-2019 Nissan NV200; S, SV, Taxi, 2.0L L4 - Gas
  • 2017–2019 Nissan Rogue; SL Hybrid, SV Hybrid; 2.0L L4 - Electric/Gas
  • 2017–2019 Nissan Rogue Sport; S, SL, SV; 2.0L L4 - Gas
  • 2017 Nissan Sentra; S, SL, SR, SV;1.6L L4 - Gas, 1.8L L4 - Gas
  • 2018-2019 Nissan Sentra; Nismo, S, SL, SR, SR Turbo, SV;1.6L L4 - Gas, 1.8L L4 - Gas
  • 2007-2011 Nissan Versa; S, SL; 1.8L L4 - Gas
  • Valve Cover Gasket Set of 3 For 2013-19 Nissan NV200 2017-19 Nissan Sentra Rogue

    Valve Cover Gaskets Seals Fit For Nissan Altima,Juke,Rogue, etc

     

    Fits for:

    2019 Nissan Altima; Edition ONE, Platinum, SR; 2.0L L4 – Gas

    2017 Nissan Juke; S, SV, Nismo, SL, Nismo RS; 1.6L L4 - Gas

    2013 Nissan NV200; S, SV; 2.0L L4 - Gas

    2014-2019 Nissan NV200; S, SV, Taxi, 2.0L L4 - Gas

    2017–2019 Nissan Rogue; SL Hybrid, SV Hybrid; 2.0L L4 - Electric/Gas

    2017–2019 Nissan Rogue Sport; S, SL, SV; 2.0L L4 - Gas

    2017 Nissan Sentra; S, SL, SR, SV;1.6L L4 - Gas, 1.8L L4 - Gas

    2018-2019 Nissan Sentra; Nismo, S, SL, SR, SR Turbo, SV;1.6L L4 - Gas, 1.8L L4 - Gas

    2007-2011 Nissan Versa; S, SL; 1.8L L4 - Gas

    2012 Nissan Versa; 1.6 S, 1.6 SL, 1.6 SV, 1.8 S, 1.8 SL; 1.6L L4 - Gas, 1.8L L4 - Gas

    2016–2018 Nissan Versa Note; S, SR, SV, SL, S Plus; 1.6L L4 - Gas

    2019 Infiniti QX50; Essential, Luxe, Pure; 2.0L L4 - Gas


    Specifications:

    Material:Rubber

    OE: 13270-5TA0A, 16175-JA00A, 14035-EL00A, 13270-ET000


    Features:

    *What is the valve cover gasket?

    Designed to seal the valve cover/cam cover to the top of the engine cylinder head, the valve cover gasket prevents motor oil from leaking out of the joint. The valve cover gasket withstands the stresses of the two surfaces expanding, shrinking, warping and rubbing while sealing in engine oil.

    *Signs of a faculty valve cover gasket

    1.Low engine oil

    2.Burning smell

    3.Rough-running engine

    *Steps of the valve cover gaskets replacement

    1.Try to tighten the gasket

    2.Allow the engine to cool and gain access to the gasket

    3.Lift off the valve cover

    4.Remove the old valve cover gasket and fit the new one

    5.Apply silicone if the manufacturer tells you do so

    6.Re-install the valve cover

    *Real-world tested

    Parts are tested on vehilce and validated to ensure optimal performance on the road.


    Packaging include:

    3x Valve Cover Gasket as picture show


    Item Specifics
    Brand Unbranded
    Type Valve Cover Gasket
    Placement on Vehicle Engine Compartment
    OE/OEM Part Number 13270-5TA0A, 16175-JA00A, 14035-EL00A, 13270-ET000
    Fitment Type Direct Replacement
    Manufacturer Warranty 1 Year
    Universal Fitment No
    Color Black
    Material Rubber
    Interchange Part Number 13270-5TA0A, 16175-JA00A, 14035-EL00A, 13270-ET000
    Features Durable, Direct Fit, Easy Installation, No Drilling Required
    Packaging include 3x Valve Cover Gasket as picture show
    Fits for 1 Fits for Nissan Altima Juke NV200 Rogue Sentra Versa
    Fits for 2 Fits for Infiniti QX50

    Payment

    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

    (2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (3). Before payment,Please keep the consistency of Paypal address and ebay address.

    (4). Quantity orders are welcome!

    Shipping

    (1) All items will be shipped in 24 hours after receiving your payment .

    (2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    Returns

    (1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    (2). All returned items should be in the original packaging , return tracking information should be provided ..

    (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

    Contact Us

    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.

    FAQ

    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.

    Picture
    Valve Cover Gasket Set of 3 For 2013-19 Nissan NV200 2017-19 Nissan Sentra Rogue

    Valve Cover Gaskets Seals Fit For Nissan Altima,Juke,Rogue, etc

     

    Fits for:

    2019 Nissan Altima; Edition ONE, Platinum, SR; 2.0L L4 – Gas

    2017 Nissan Juke; S, SV, Nismo, SL, Nismo RS; 1.6L L4 - Gas

    2013 Nissan NV200; S, SV; 2.0L L4 - Gas

    2014-2019 Nissan NV200; S, SV, Taxi, 2.0L L4 - Gas

    2017–2019 Nissan Rogue; SL Hybrid, SV Hybrid; 2.0L L4 - Electric/Gas

    2017–2019 Nissan Rogue Sport; S, SL, SV; 2.0L L4 - Gas

    2017 Nissan Sentra; S, SL, SR, SV;1.6L L4 - Gas, 1.8L L4 - Gas

    2018-2019 Nissan Sentra; Nismo, S, SL, SR, SR Turbo, SV;1.6L L4 - Gas, 1.8L L4 - Gas

    2007-2011 Nissan Versa; S, SL; 1.8L L4 - Gas

    2012 Nissan Versa; 1.6 S, 1.6 SL, 1.6 SV, 1.8 S, 1.8 SL; 1.6L L4 - Gas, 1.8L L4 - Gas

    2016–2018 Nissan Versa Note; S, SR, SV, SL, S Plus; 1.6L L4 - Gas

    2019 Infiniti QX50; Essential, Luxe, Pure; 2.0L L4 - Gas


    Specifications:

    Material:Rubber

    OE: 13270-5TA0A, 16175-JA00A, 14035-EL00A, 13270-ET000


    Features:

    *What is the valve cover gasket?

    Designed to seal the valve cover/cam cover to the top of the engine cylinder head, the valve cover gasket prevents motor oil from leaking out of the joint. The valve cover gasket withstands the stresses of the two surfaces expanding, shrinking, warping and rubbing while sealing in engine oil.

    *Signs of a faculty valve cover gasket

    1.Low engine oil

    2.Burning smell

    3.Rough-running engine

    *Steps of the valve cover gaskets replacement

    1.Try to tighten the gasket

    2.Allow the engine to cool and gain access to the gasket

    3.Lift off the valve cover

    4.Remove the old valve cover gasket and fit the new one

    5.Apply silicone if the manufacturer tells you do so

    6.Re-install the valve cover

    *Real-world tested

    Parts are tested on vehilce and validated to ensure optimal performance on the road.


    Packaging include:

    3x Valve Cover Gasket as picture show

    Item Specifics
    Brand :Unbranded
    Type :Valve Cover Gasket
    Placement on Vehicle :Engine Compartment
    OE/OEM Part Number :13270-5TA0A, 16175-JA00A, 14035-EL00A, 13270-ET000
    Fitment Type :Direct Replacement
    Manufacturer Warranty :1 Year
    Universal Fitment :No
    Color :Black
    Material :Rubber
    Interchange Part Number :13270-5TA0A, 16175-JA00A, 14035-EL00A, 13270-ET000
    Features :Durable, Direct Fit, Easy Installation, No Drilling Required
    Packaging include :3x Valve Cover Gasket as picture show
    Fits for 1 :Fits for Nissan Altima Juke NV200 Rogue Sentra Versa
    Fits for 2 :Fits for Infiniti QX50


    (1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.

    (2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (3). Before payment,Please keep the consistency of Paypal address and ebay address.

    (4). Quantity orders are welcome!

    (1) All items will be shipped in 24 hours after receiving your payment .

    (2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.

    (1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

    (2). All returned items should be in the original packaging , return tracking information should be provided ..

    (3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

    (1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.

    (2).We maintain high standards of excellenceand  strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately Before you give us neutral  or negative  feedback, so that we can satisfactorily address your concerns.

    Q1: Will this bulb fit my vehicle?
    A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
     
    Q2: My item has not arrived, what's taking so long?
    A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
     
    Q3: Do I need to mention the Year, Make and Model in the notes when place order?
    A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
     
    Q4: My bulbs won't fit, help!
    A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
    The bulb size may be wrong, double check the item you received with the item you ordered.
    Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
     
    Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
    A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn't work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
     
    Q6: WARNING ABOUT POLARITY
    Unlike halogen bulbs, LED are polarity sensitive.
    BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
    - if your light turns on, please proceed to install both bulbs onto your vehicle.
    - if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
    Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.


    All rights reserved.