Fuel R60P Marine Fuel Water Separator Replacement for Marine Outboard8744
[Engines Fitment & Replace] Marine Fuel Filter Marine Fuel Water Separator Fits for Marine Outboard Motor.
[Installation] No modification to the electrical system is required, plug-and-play, direct fit.Please always pre-fill clean fuel on the dirty side of the filter without opening the fuel cap.Do not reuse the old filter, it will cause great damage to the car engine. After installing the new filter, prime and start the engine, wait a few minutes, and then check for leaks.
[Quality materials] 3 layers filter paper, made of synthetic fiber, filters the impurities in the fuel and protects the fuel pump nozzle, cylinder liner and piston ring, greatly reducing wear and tear and reducing fuel consumption.Filters are designed for high performance applications on the engine, your engine will than ever with clean,water-free fuel.
[Higher Filter Rating] Filter Rating 10 Micrometres. 10 Micrometres filters are over 99.6% efficiency at removing particles as small as 10 Micrometres. 10 Micrometres filters are recommended to protect sensitive inboard,sterndrive and outboard fuel injection systems. Designed to trap the smallest particles and emulsified water from .
[Extra Protection] Protect fuel pump nozzle, cylinder liner and piston ring.Exceeds 99.6% filtration efficiencyby trapping any contaminants larger than ten microns.
1. Plug-and-play, direct fit, easy installation.Fuel Water Separator Filter ports offer lower pressure drop rates.
2. Solid impurities (iron oxide and dust, etc.) in the fuel are filtered out.These are more suited to compact off road equipment:,skid steers loaders,.
3. The filter units are coated with a electrostatically applied powder coating for superior resistance.
4. Fuel Water Separator Filter fit Outboard Motors as well.
Colour:As Shown
M
[Installation] No modification to the electrical system is required, plug-and-play, direct fit.Please always pre-fill clean fuel on the dirty side of the filter without opening the fuel cap.Do not reuse the old filter, it will cause great damage to the car engine. After installing the new filter, prime and start the engine, wait a few minutes, and then check for leaks.
[Quality materials] 3 layers filter paper, made of synthetic fiber, filters the impurities in the fuel and protects the fuel pump nozzle, cylinder liner and piston ring, greatly reducing wear and tear and reducing fuel consumption.Filters are designed for high performance applications on the engine, your engine will than ever with clean,water-free fuel.
[Higher Filter Rating] Filter Rating 10 Micrometres. 10 Micrometres filters are over 99.6% efficiency at removing particles as small as 10 Micrometres. 10 Micrometres filters are recommended to protect sensitive inboard,sterndrive and outboard fuel injection systems. Designed to trap the smallest particles and emulsified water from .
[Extra Protection] Protect fuel pump nozzle, cylinder liner and piston ring.Exceeds 99.6% filtration efficiencyby trapping any contaminants larger than ten microns.
1. Plug-and-play, direct fit, easy installation.Fuel Water Separator Filter ports offer lower pressure drop rates.
2. Solid impurities (iron oxide and dust, etc.) in the fuel are filtered out.These are more suited to compact off road equipment:,skid steers loaders,.
3. The filter units are coated with a electrostatically applied powder coating for superior resistance.
4. Fuel Water Separator Filter fit Outboard Motors as well.
Colour:As Shown
M
