Selling Point:
1) Good light type, Low power consumption and super bright lighting,the position of the light-emitting point is 1:1 to the original car halogen lamp.
2) No delay to light up, Faster on/off response time, low power consumption and high lighting,Good Quality And Durable,Easy to Install,Good Feel.
3) Lifespan: Up to 50,000 hours working hours, stable quality, long service life, adopt imported chips emit 360 degree light can light up every corner.
4) The model is as the same as factory light, no need to change car wire rute, for most cars, just Plug and Play, NO modification required A direct replacement part that easy to install.
5) With High-purity brightness, strong penetrability and superior stability,Energy saving, environmental protection, through strict test, Use safer driving in the car,highly recommended.
6) With cooling fan, effient cooling system.
7) Anti-electromagnetic interference.
Parameter:
Model: 9003 / H4
Power: 25W/per bulb, 50W/per Set
Lumens: 8000LM/per bulb, 16000LM/per Set
Color Temperature: 6000K Xenon White
Light source: CSP (1860)
Certified by: CE & ROHs
Voltage: DC 9V-32V (Just for 12V cars)
Warranty: 2 YEARS
Lifetime: More than 50000 hours
Placement on Vehicle: Front
Applicable Used as a: Headlight
Suitable For Pickup, Wagon, UTB, Cab, ATV, SUV, Jeep, Truck, Bus etc.
Package included:
2x 9003 H4 LED Headlight
Attention:
LED bulb is low power device, the following issues may occur if you want to use LED bulb on some European vehicles: Hyper Flashing, No Flashing, or Error Code. Those are NOT problems of LED bulb and NOT covered by warranty. You may simply add a set of load resistor (NOT included) to avoid those issues.can be solved with a decoder (decoder must be purchased separately)
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
