Fits For the Following:
Cummins Holset 6.7 Diesel HE300VG
6.7L Turbo I6 Diesel
RAM 2500 2013, 2014, 2015, 2016, 2017, 2018
RAM 3500 2013, 2014, 2015, 2016, 2017, 2018
RAM 4500 2013, 2014, 2015, 2016, 2017, 2018
RAM 5500 2013, 2014, 2015, 2016, 2017, 2018
Turbo OEM Number:
3787604 3781632 5601240NX, 3794756, 3775439, 3787608
3781633, 3779986, 3798539 37985, 3794758, 3775427
3787607, 3781755, 3779987 5326054, 3781754, 3775426
3779989, 3784573, 3784574, 68307025AA, 3798575
5326054, 5326057, 5327046 532704600, 532704600HX
5459710RX, 68210648AA, 68212738AA, 68245792AA
68253983AA, 68295438AA, 68297874AA, 68321377AA,68445522AA
Turbo Actuator Calibration Tool:
Operating voltage: 8-28V,According to the actuator supply voltage
to determine(Usually 12V or 24V)
to determine(Usually 12V or 24V)
Operating temperature: -40~125°.
Human-machine interface: 3 switches, 1 status lamp, 1 Display
panel.
panel.
Calibration method(Holset)
Condition 1▬ Actuator had been removed from turbo Calibration Step:
press IP Key->Assemble the Actuator with turbo and then-> press IC Key
Condition 2▬ Actuator had been calibrated and assembled with turbo
Calibration Step:press IC Key
press IP Key->Assemble the Actuator with turbo and then-> press IC Key
Condition 2▬ Actuator had been calibrated and assembled with turbo
Calibration Step:press IC Key
Warning: Before powering on the calibration box, ensure that the
actuator is properly connected to the calibration box
actuator is properly connected to the calibration box
Warning: Any time when Reset key is pressed, make sure Actuator had
been removed from turbo, and then IP->IC
been removed from turbo, and then IP->IC
Warning: When IP success(digital tube display IP-S), make sure turbo
gear is in the left limitation location and then assemble
actuator. If not, calibration cannot success.
gear is in the left limitation location and then assemble
actuator. If not, calibration cannot success.
Installation Vedio:
