Stock#: 762 This item is pre-owned – it will work like new once programmed to your vehicle
One (1) Aftermarket remote keyless entry fob alarm Transmitter control clicker keyfob controller replacement autostart car starter start opener Functions at 100% Tested & GuaranteedREMOTE MADE FOR: Omega, Excalibur, K9, Crimeguard, Freedom, Executive ® BUTTON: 2 LED or LIGHT: RED BOARD#: AIE16RK2 310Mhz FCC ID: L2MAL41T MODEL NO. R&D #210-07 FEATURES: LOCK/UNLOCK, TRUNK WORKS WITH: Freedom 150, 200, 200+ PROGRAM REMOTE TO YOUR VEHICLE If you're not sure your
vehicle can use this remote, please ask questions or contact your local dealer
first. THIS REMOTE NEEDS TO BE PROGRAMMED TO YOUR VEHICLE… This remote will need to be programmed to your vehicle with your vehicle in order to work with your vehicle – all previously programmed remotes will become inactive and must be reprogrammed at the same time. Starter Disable Feature makes starting the vehicle impossible when the system is armed. Brand On Transmitter Case System Model Programming Method Crime Guard 328i 2 Crime Guard 328i2 6 Crime Guard 328i3 6 Crime Guard 328i4 1 Crime Guard 350i5 1 Crime Guard 5000 7 Crime Guard 5000-C 2 Crime Guard 5000-F 7 Crime Guard 5000-L 7 Crime Guard 533i 2 Crime Guard 533i2 6 Crime Guard 533i3 6 Crime Guard 533i4 1 Crime Guard 650i5 1 Crime Guard 7000 7 Crime Guard 745i 1 Crime Guard 745i2 6 Crime Guard 745i3 6 Crime Guard 745i4 1 Crime Guard 750i5 1 Crime Guard 750i5 1 Crime Guard 850i3 1 Crime Guard 850i3 1 Crime Guard 850i4 1 Crime Guard 850i4 1 Crime Guard 850i4E 1 Crime Guard 850i4E 1 Crime Guard 850i5 1 Crime Guard 850i5 1 Crime Guard 9000 7 Brand On Transmitter Case System Model Programming Method Excalibur AL-1000 ATV 1 Excalibur AL-1000 ATV2 1 Excalibur AL-1000 SH 1 Excalibur AL-1000 SX 2 Excalibur AL-1000-E 1 Excalibur AL-1000-EDP 1 Excalibur AL-1000-EDP 1 Excalibur AL-1500-E 1 Excalibur AL-1500-E 1 Excalibur AL-1500-EDP 1 Excalibur AL-1810-EDP 1 Excalibur AL-1810-EDP (2-way) 1 Excalibur AL-2000-E 1 Excalibur AL-2000-E 1 Excalibur AL-2000-E 1 Excalibur AL-2000-EDP 1 Excalibur AL-2000-EDP 1 Excalibur AL-500 1 Excalibur AL-500 SPORT 1 Excalibur AL-500CF 1 Excalibur AL-700 ATV 1 Excalibur AL-700 EX 7 Excalibur AL-700 EZ 7 Excalibur AL-700 GT 7 Excalibur AL-700 H 1 Excalibur AL-700 LC 7 Excalibur AL-800 7 Excalibur AL-900 ATV 1 Excalibur AL-900 ATV2 1 Excalibur AL-900 ATX 7 Excalibur AL-900 ATZ 7 Excalibur AL-900 GTX 7 Excalibur AL-900 HX 1 Excalibur AL-900 JX 2 Excalibur ATV-1000 1 Excalibur RS-22 1 Brand On Transmitter Case System Model Programming Method Excalibur Gold EG-1200ATV 1 Excalibur Gold EG-1400ATV 1 Excalibur Gold EG-1600ATV 1 Excalibur Gold EG-1600ATV 1 Excalibur Gold EG-1800ATV 1 Excalibur Gold EG-1800ATV 1 Brand On Transmitter Case System Model Programming Method Executive/Model One E-2100 4 Executive/Model One E-2100ATV 4 Executive/Model One E-2300 4 Executive/Model One E-2300ATV 4 Executive/Model One E-2500 4 Executive/Model One E-2500ATV 4 Executive/Model One E-3000 4 Executive/Model One E-3000ATV 4 Executive/Model One Model #1 3 Executive/Model One Model #1 3 Executive/Model One Model #1.1 3 Executive/Model One Model #1.2 3 Executive/Model One Model #1.3 1 Executive/Model One Model #1.7RS 3 Executive/Model One Model #1ATV 3 Executive/Model One Model #2ATV 3 Executive/Model One Model 1.2 3 Brand On Transmitter Case System Model Programming Method Freedom/FBI 150 1 Freedom/FBI 150-E 1 Freedom/FBI 150-E 1 Freedom/FBI 410 4 Freedom/FBI 411 4 Freedom/FBI 450 1 Freedom/FBI 515 5 Freedom/FBI 517 4 Freedom/FBI 550-CF 1 Freedom/FBI 550-SPORT 1 Freedom/FBI 650 1 Freedom/FBI Freedom 200 1 Freedom/FBI Freedom 200+ 1 Freedom/FBI Freedom 200+2 1 Freedom/FBI Freedom 200+P 1 Freedom/FBI Freedom 300 1 Freedom/FBI Freedom 300 ATV 1 Freedom/FBI Freedom 400 5 Freedom/FBI Freedom 410 5 Freedom/FBI Freedom 411 5 Freedom/FBI Freedom 411 ATV 5 Freedom/FBI Freedom 500 1 Freedom/FBI Freedom 515 4 Freedom/FBI Freedom 517 4 Freedom/FBI FREEDOM-550 1 Brand On Transmitter Case System Model Programming Method Generic (No Brand Name) AL_770 7 Generic (No Brand Name) AL-1500-EDP 1 Generic (No Brand Name) AL-532T 3 Generic (No Brand Name) AL-632-H 1 Generic (No Brand Name) AL-632-L 7 Generic (No Brand Name) AL-732LC 7 Generic (No Brand Name) AL-770GT 7 Generic (No Brand Name) AL-770-L 7 Generic (No Brand Name) AL-770LC 7 Generic (No Brand Name) AL-790 7 Generic (No Brand Name) AL-790D 7 Generic (No Brand Name) AL-832 7 Generic (No Brand Name) AU-REC-1 7 Generic (No Brand Name) AU-REC-1LC 7 Generic (No Brand Name) AU-REC-2 7 Generic (No Brand Name) AU-REC-2ATV 1 Generic (No Brand Name) AU-REC-2LC 7 Generic (No Brand Name) AU-REC-4 (T) 7 Generic (No Brand Name) AU-REC-6 ATV 4 Generic (No Brand Name) AU-REC-6S 4 Generic (No Brand Name) AU-REC-7 ATV 4 Generic (No Brand Name) AU-REC-7ST 4 Generic (No Brand Name) C-2 1 Generic (No Brand Name) C-2+ 1 Generic (No Brand Name) C-2+2 1 Generic (No Brand Name) C-2+P 1 Generic (No Brand Name) C-3 1 Generic (No Brand Name) C-3 ATV 1 Generic (No Brand Name) C-4SRS 3 Generic (No Brand Name) C-5 1 Generic (No Brand Name) C-5+ 1 Generic (No Brand Name) C-514 4 Generic (No Brand Name) C-515G 4 Generic (No Brand Name) C-6 1 Generic (No Brand Name) COMFORT START 1 Generic (No Brand Name) MC-1 1 Generic (No Brand Name) MERCURY 1 Generic (No Brand Name) MERCURY 1 Generic (No Brand Name) MERCURY 1 Generic (No Brand Name) MERCURY 2 1 Generic (No Brand Name) MERCURY-SS 1 Generic (No Brand Name) REC-10 3 Generic (No Brand Name) REC-11 3 Generic (No Brand Name) REC-8 3 Generic (No Brand Name) REC-9 3 Generic (No Brand Name) RS-7K 1 Generic (No Brand Name) RS-7K2 1 Generic (No Brand Name) SYSTEM-25 1 Brand On Transmitter Case System Model Programming Method K-9 150-D 1 K-9 150-E 1 K-9 CLASSIC-E 1 K-9 CLASSIC-E 1 K-9 CLASSIC-EDP 1 K-9 CLASSIC-EDP 1 K-9 ECLIPSE 1 K-9 FIVE T 1 K-9 K9-5 CLASSIC 1 K-9 K9-CLASSIC 1 K-9 K9-FIVE 7 K-9 K9-FIVE ATV 1 K-9 K9-FIVE C 2 K-9 K9-FIVE F 7 K-9 K9-FIVE L 7 K-9 K9-FOUR 7 K-9 K9-MUNDIAL 1 K-9 K9-MUNDIAL2 1 K-9 K9-MUNDIAL4 1 K-9 K9-ONE 7 K-9 K9-ONE ATV 5 K-9 K9-SEVEN 7 K-9 K9-SEVEN GT 7 K-9 K9-SEVEN L 7 K-9 K9-SEVEN LC 7 K-9 K9-SIX 7 K-9 K9-SIX ATV 1 K-9 K9-SIX ATV2 1 K-9 K9-SIX ATVS (Early Model) 1 K-9 K9-SIX ATVS (Late Model) 1 K-9 K9-SIX C 2 K-9 K9-SIX CP 7 K-9 K9-SIX DIP 7 K-9 K9-SIX H 1 K-9 K9-SIX L 7 K-9 MUNDIAL-3 1 K-9 MUNDIAL-3 1 K-9 MUNDIAL-SS 1 K-9 MUNDIAL-SS+ 1 K-9 MUNDIAL-SST 1 K-9 MUNDIAL-SST 1 K-9 SUPER MUNDIAL 1 K-9 SUPER MUNDIAL 1 K-9 TWO 7 K-9 TWO C 2
Brand On Transmitter Case System Model Programming Method M.A.T. FIVE T 1 M.A.T. M.A.T.-10ATV 1 M.A.T. M.A.T.-10SH 1 M.A.T. M.A.T.-10SX 2 M.A.T. M.A.T.-5 7 M.A.T. M.A.T.-5 ATV 1 M.A.T. M.A.T.-5C 2 M.A.T. M.A.T.-5F 7 M.A.T. M.A.T.-5L 7 M.A.T. M.A.T.-6 7 M.A.T. M.A.T.-6 ATV 1 M.A.T. M.A.T.-6 DIP 7 M.A.T. M.A.T.-6C 2 M.A.T. M.A.T.-6H 1 M.A.T. M.A.T.-6L 7 M.A.T. M.A.T.-7EX 7 M.A.T. M.A.T.-7EZ 7 M.A.T. M.A.T.-7L 7 M.A.T. M.A.T.-7L 7 M.A.T. M.A.T.-8 7 M.A.T. M.A.T.-9ATX 7 M.A.T. M.A.T.-9ATZ 7 M.A.T. M.A.T.-9GT 7 M.A.T. M.A.T.-9LCX 7 Brand On Transmitter Case System Model Programming Method MARS MARS-11 1 MARS MARS-11+ 1 MARS MARS-22 1 MARS MARS-22 1 MARS MARS-22 1 MARS MARS-22 1 MARS MARS-22+ 1 MARS MARS-32 1 MARS MARS-32 1 MARS MARS-32+ 1 MARS MARS-33 1 MARS MARS-33 1
METHOD #1 Before you begin, your system must be in a disarmed state and you must know where your valet switch is located. If you are unfamiliar with your valet switch, click here. If you know where your valet switch is, perform the following steps:
1) Turn the vehicle's ignition to the "on" position
2) Within 7 seconds of step 1, press the valet switch 5 times. The alarm should respond with a long siren chirp.
3) Press the large/ lock button on your remote (for Freedom 500, C-5, and K9 Mundial2, press 2nd or 3rd channel. For MARS-22, press Lock & Unlock at the same time). The alarm should respond with a short siren chirp.
4) Repeat step 3 for each additional remote that is to operate the system (up to 4 remotes).
Note: the system will automatically exit programming mode if it detects a 15 second period of no activity.
METHOD #2 Before you begin, your system must be in a disarmed state and you must know where your valet switch is located. If you are unfamiliar with your valet switch, click here. If you know where your valet switch is, perform the following steps:
1) Turn the vehicle's ignition to the "on" position
2) Within 7 seconds of step 1, press the valet switch 5 times. The alarm should respond with a long siren chirp.
One Button Remote:
3) Press the button on your remote. The alarm should respond with a short siren chirp.
4) Press the valet switch one time.
5) Proceed to step 6.
Two button remote:
3) Press the large button on our remote. The alarm should respond with a short siren chirp.
4) Press both buttons at the same time. The alarm should respond with 2 short siren chirps
5) Press the small button on your remote. The alarm should respond with 3 short siren chirps.
Three button remote:
3) Press the large button on your remote. The alarm should respond with a short siren chirp.
4) Press the small right button on your remote. The alarm should respond with 2 short siren chirps.
5) Press the small left button on your remote. The alarm should respond with 3 short siren chirps.
6) Repeat steps 3-5 for each additional remote that you wish to operate your system (up to 4 remotes).
Note: the system will automatically exit programming mode if it detects a 15 second period of no activity.
METHOD #3 Before you begin, your system must be in a disarmed state and you must know where your valet switch is located. If you are unfamiliar with your valet switch, click here. If you know where your valet switch is, perform the following steps:
1) Turn the vehicle's ignition to the "on" position
2) Within 7 seconds of step 1, press the valet switch 5 times. The alarm should respond with a long siren chirp.
3) Press the valet switch to enter your secret override code. If a code has never been programmed, press the valet switch one time. The alarm should respond with a long siren chirp.
4) Press the large/ lock button on your remote. The alarm should respond with a short siren chirp.
5) Repeat step 4 for each additional remote that is to operate the system (up to 4 remotes).
Note: the system will automatically exit programming mode if it detects a 15 second period of no activity.
METHOD #4 Before you begin, your system must be in a disarmed state.
Perform the following steps:
1) Turn the vehicle's ignition from "off" to "on" 5 times within 7 seconds. The system should respond with a horn honk or the doorlocks will lock then unlock.
2) Press the large/ lock button on your remote. The system should respond with a short horn honk or the doorlocks will lock then unlock.
3) Repeat step 2 for each additional remote that is to operate the system (up to 4 remotes).
Note: the system will automatically exit programming mode if it detects a 15 second period of no activity.
METHOD #5 This type of alarm automatically enters transmitter programming mode upon power up. Before you begin, make sure that all points of entry (doors, trunk, hood) are closed. If there is a hood pin switch, have a friend hold it down or temporarily disconnect it. The system will not enter programming mode if it detects an open point of entry.
Perform the following steps:
If the system has been without power for more than 24 hours:
1) Apply power to the system.
2) Press the large/ lock button (Press small center button for Freedom 400) on your remote. The system should respond with a short siren chirp.
3) Repeat step 2 for each additional remote that is to operate the system.
If the system has had power within the last 24 hours:
1) Disconnect and re-apply power.
2) Press the large button (Press small center button for Freedom 400) on any remote that does not already operate the system (this is how the system determines that you want to program transmitters). The system should respond with a short siren chirp.
3) Repeat step 2 for each additional remote that is to operate the system.
Note: the system will automatically exit programming mode if it detects a 15 second period of no activity.
METHOD #6 Before you begin, your system must be in a disarmed state and you must know where your valet switch is located. If you are unfamiliar with your valet switch, click here. If you know where your valet switch is, perform the following steps:
1) Turn the vehicle's ignition "on" then "off".
2) Within 7 seconds of step 1, press the valet switch 5 times. The alarm should respond with a long siren chirp.
3) Press the valet switch one time to enter transmitter programming mode.
4) Press the large/ lock button on your remote. The alarm should respond with a short siren chirp.
5) Repeat step 4 for each additional remote that is to operate the system (up to 4 remotes).
Note: the system will automatically exit programming mode if it detects a 15 second period of no activity.
METHOD #7 Transmitters for this model alarm are coded from the factory. The transmitter has to be modified to match the code of your alarm. If you need a replacement transmitter for your alarm, you will need to open the transmitter shell (there is typically a small phillips head screw in the back that must be removed first). You will need to look on the circuit board for a white paper sticker that has a 5 or 6 digit code that will start with 1, 2, or 3. You will need to provide this code to your dealer or Omega at the time of purchasing the transmitter so it can be precoded to operate your alarm.
|
STOP!
Before You Buy Please Read…
Program Remote To Your Vehicle
If you're not sure your vehicle can use this remote, please ask questions or contact your local dealer first.
This remote needs to be programmed to your vehicle in order for it to work with your vehicle’s installed RKE (remote keyless entry ) system:
1. PLEASE REFER TO YOUR ORIGINAL OWNER’S GUIDE FOR YOUR AFTERMARKET INSTALLED KEYLESS ENTRY SYSTEM OR
2. CONTACT A LOCAL CAR/AUDIO SHOP
3. CONTACT A LOCKSMITH
4. CONDUCT A GOOGLE SEARCH
5. CONTACT MANUFACTURER
Payment: We accept payment via PayPal or Credit Card. Please contact us via eBay messages for any questions concerning payments. Payment is expected within 5 days.
PA SALES TAX: As per the State of PA Franchise Board we must collect sales tax from PA Residents for any purchase made from our store.
Contact/Email: Due to scams etc, we DO NOT respond to emails. We only read/respond to EBAY MESSAGES. Messages & Best Offers are checked throughout the day & we typically respond 7 days a week. Please contact us with questions via eBay messages (keyless4u).
100% Guarantee Remote Shipping / Return Policy
Shipping & Handling
Combined Shipping & Handling Discount (multiple item purchase discount):
S&H discount = the price of the 1ST remote’s S&H + 1.99 each additional remote’s S&H
Shipped From: Pennsylvania, USA
Shipping Method: USPS mail service
USA Shipment Options:
◊ USPS 1ST class mail service
◊ USPS Priority class mail service
◊ USPS EXPRESS class mail service
Canadian Shipment Options:
◊ USPS 1ST class mail service
◊ USPS Priority class mail service
◊ USPS Express class mail service
Worldwide (Outside of USA & Canada) Shipment Options:
◊ USPS Priority class mail service
◊ USPS Express class mail service
Warranty/Returns:
1. We have a 30 day return policy.
2. All returns for replacements and refund need an RMA #.
3. Please contact us before returning items so we can give you the RMA # and the proper return address.
4. No refunds / replacements will be granted without an RMA#
We ensure proper working condition of all previously used or new remotes through a serious of tests performed with the Santronics Testing device. Each button is tested for functionality prior to shipment and then logged.
Please Note: Each remote and circuit board is UV id’d prior to shipment – All returns receive a UV ID inspection to verify originality of remote sent prior to refund or replacement.
Does this keyless remote entry come with a battery?
Yes. It will have a working battery installed.
Battery Condition:
A. All remotes sold on Keyless4u include working batteries.
B. Installed batteries are not tested for battery life- they are simply working.
Some are new and some are used.
Your vehicle will be installed with one of the following keyless entry systems:
a. Standard Keyless Remote Packages: Installed at time of manufacture.
b. Optional Keyless Remote Packages: Installed by a dealer.
c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop.
d. No remote keyless entry system at all.
The above
information can change which remote you need
for your installed remote keyless system.