The SRT-6200 surface roughness tester is design to measure
2 parameters (Ra, Rz) using the built-in Diamond
pin probe. It has 4 wave filtering methods (RC, PC-RC,
GAUSS & D-P). In addition, said parameters
can be downloaded directly to PC via the optional
RS-232 CD software & cables. This tester is compatible
with 4 standards ISO, DIN, ANSI and JIS international
standards. This terster is widely used in production
site to measure surface roughness of various machinery-processed
parts and calculate corresponding parameters according
to selected measuring conditions and clearly display
all measurement parameters in Metric or Imperial.
Easy
measurement can be done by placing the sensor on the
surface then uniformly slides along the surface by driving
the mechanism inside the tester. The sensor measures
the roughness of the surface via the sharp built-in
probe.
This
roughness causes displacement of the probe which results
in change of inductive amount of induction coils so
as to generate analogue signal, which is in proportion
to the surface roughness at output end of phase-sensitive
rectifier. The exclusive DSP processes and calculates
then outputs the results clearly on LCD.
Buy Now!
Features:Brings
efficiency, reliability and ease-of-use
Multiple
parameter measurement: Ra, Rz
Highly
sophisticated inductance sensor
Four
wave filtering methods : RC, PC-RC, GAUSS and D-P
Built-in
lithium ion rechargeable battery and control
circuit with high capacity
Selectable
Metric (µm) and Imperial (µinch)
Small
in size, light in weight and easy to use
Manual
and Auto switch off
Exclusive
DSP processes to output measurement results on LCD
Recharge
battery via USB cable or Power Adapter
Compatible
with four international standards ISO, DIN, ANSI and
JIS
Applicable
in production site, laboratory and workshop in factory
Easy
operation menu and large LCD display
Can
communicate with PC computer for statistics, printing
and analyzing via the optional RS232C
software for interface and cable
Optional
Software CD and USB Cables,
just add US $38.90 / GBP 23.90 / AU $44.90 / EUR 28,90 to your order to get
the optional CD & Cables (not included in the set)
Specifications:
Multiple
parameter measurement: Ra, Rz
Display:
4 digits, 10mm LCD with blue backlight
Filtering
methods: RC, PC-RC, GAUSS and D-P
Display
Range
Ra:
0.05-10.00 µm / 1.000-400.0 µinch
Rz:
0.020-100.0 µm / 0.780-4000 µinch
Accuracy:
Not more than ±10%
Fluctuation
of display value: Not more than 6%
Sensor
Test
Principle: Inductance type
Material
of Probe Pin: Diamond
Radius
of Probe Pin: 10µm
Measurement
Force of Probe: 16mN(1.6gf)
Vertical
Radius of Guiding Head: 48mm
Probe
Angle: 90°
Maximum
driving stroke: 17.5mm/0.7inch
Cutoff
Length: 0.25mm / 0.8mm / 2.5mm optional
Evaluation
length: 1-5 cut-off optional
Driving
speed
sampling
length = 0.25mm Vt=0.135mm/s
sampling
length = 0.8mm Vt=0.5mm/s
sampling
length = 2.5mm Vt=1mm/s
returning
Vt=1mm/s
Resolution:
0.001µm
if reading <10µm
0.01µm
if 10µm =reading <100µm
0.1µm
if reading =100µm
Data
output: communicate with PC through RS232C interface
(optional, not included in set)
Metric
/ Imperial Conversion
DC
Power: Rechargeable Li-ion battery
Operating
conditions
Temperature:
0~50°C (32~122°F)
Humidity:
<80%
Auto
& Manual switch off
Size:
140 x 57 x 48mm (5.5 x 2.2 x 1.9 inch)
Weight:
about 420g
(main unit only)
Accessories:
INCLUDED:
Metal
Carrying Case
Standard
Sensor
Standard
Sample Plate
Operation
Manual
Screwdriver
Adjustable
Leg
Sheath
of Sensor
Power
Adapter (choose 1 from these available Adapter for
US, UK, Australia and Europe system)
OPTIONAL:
RS-232 Software & Cables Just
add US $38.90 / GBP 23.90 / AU $44.90 / EUR 28,90
to your order to get the RS232 CD Software and Cables
Warranty:
2
years warranty
All
our products are manufactured under the strict quality
control guidelines established by EN ISO9001-2000 Standards
We welcome any questions you may have. Please send us a message through eBay and we will answer you within 48 hours (excluding weekend and holidays).
